Dear all, I am using LyX with a book (Memoir) class to write my
thesis. I have seen that though the page number is on the right (left)
side of odd (even) pages, the inner margin (the biggest one) is also
to the right (left) side of odd (even) pages. So, the page number is
always on the same side
Uwe Stöhr schreef:
Murat Yildizoglu schrieb:
I can see two console windows opening each time I launch Lyx using
the bat file that has been installed by the alternative installer.
They disappear very quickly (I do not have time to read their contents).
This is how it should be.
LyX is
Dear Lyx-list,
I want to use endnotes with hyperref. Endnotes are produced by:
- Footnote function from Lyx
- insert ERT '\theendnotes' (where endnotes should appear) and in preamble
\usepackage{endnotes}
\let\footnote=\endnote
However, the number of the endnotes are not 'clickable' which
Am 13.12.2009 14:10, schrieb Vincent van Ravesteijn:
LyX is programmed in a way that a console is always started. My and
also the standard installer hides it immediately.
The standard installer doesn't open this console window.
No, this installer does the same:
Section -Launch
# Start
On Sun, Dec 13, 2009, Julio Rojas wrote:
Dear all, I am using LyX with a book (Memoir) class to write my
thesis. I have seen that though the page number is on the right (left)
side of odd (even) pages, the inner margin (the biggest one) is also
to the right (left) side of odd (even) pages.
Thanks Dave. I have just checked the memoir class manual and have
found this fact. As I have no use for a bigger outer margin, but I'll
do for an inner one (bindings), I have added the anysize package to
the preamble:
\usepackage{anysize}
\marginsize{4.5cm}{3cm}{3cm}{3cm}
Thanks for your tip.
Uwe Stöhr schreef:
Am 13.12.2009 14:10, schrieb Vincent van Ravesteijn:
LyX is programmed in a way that a console is always started. My and
also the standard installer hides it immediately.
The standard installer doesn't open this console window.
Ok, I see some extra movement in the task
Am 13.12.2009 15:10, schrieb Vincent van Ravesteijn:
Ok, I see some extra movement in the task bar when opening LyX, ..
that's all.
I believe that with your installer, one can really see a window popping
up (or two).
This is correct, but they are closed immediately -- takes a few
Dear all,
I am experiencing a minor problem with the visualization of /ldots and I
wonder if it is specific to my installation.
When I insert an ellipsis with ALT-. Lyx sometimes inserts three regular-
looking black-colored dots, and sometimes it inserts three wider spaced blue
dots. The
Dear all
Out of these four, only \today seems to be working here in ERT (LyX
1.6.5, Debian testing, amd64). I get errors for any of \day, \month or
\year, commands that I found mentioned in this document [1].
Should I expect these commands to work with LyX? Alternatively, what
command should I
Liviu Andronic schreef:
Dear all
Out of these four, only \today seems to be working here in ERT (LyX
1.6.5, Debian testing, amd64). I get errors for any of \day, \month or
\year, commands that I found mentioned in this document [1].
Should I expect these commands to work with LyX?
Hi
I have some problems for to install a new layout.
I create a layout for the class au.cl of the journal Algebra Universalis
ht= tp://www.math.umanitoba.ca/homepages/au/instructions.html
First, I install the au.cl class in Miktex. The class is installed correctly
because I have checked with
On 12/13/2009 07:46 PM, Sergio Celani wrote:
Hi
I have some problems for to install a new layout.
I create a layout for the class au.cl of the journal Algebra Universalis
http://www.math.umanitoba.ca/homepages/au/instructions.html
I assume you have saved this as au.cls? I don't know for sure,
Thanks for all your comments, but I am confused now.
Could you please provide an example LyX file and neccesary commands which
need to be executed in the shell (Linux)? Just that I see how it works.
Cheers,
Rainer
On Fri, Dec 11, 2009 at 7:57 PM, Julien Rioux julien.ri...@gmail.comwrote:
Hi
I want to execute a command whenever I compile a compile a LyX file (pdf,
dvi, ps, ...) to save the output from svn info ... to a file to be able to
use it
I thought about using a copier, but which one do I have to use?
Am I right in assuming, thet a copier as below would do what I want?
Sorry - the copier should read:
###
#!/bin/bash
FROM=$1
TO=$2
TODIR=`dirname $TO`
svn info $FROM $TODIR/svninfo.txt
###
Rainer
On Mon, Dec 14, 2009 at 9:51 AM, Rainer M Krug r.m.k...@gmail.com wrote:
Hi
I want to
Dear all, I am using LyX with a book (Memoir) class to write my
thesis. I have seen that though the page number is on the right (left)
side of odd (even) pages, the inner margin (the biggest one) is also
to the right (left) side of odd (even) pages. So, the page number is
always on the same side
Uwe Stöhr schreef:
Murat Yildizoglu schrieb:
I can see two console windows opening each time I launch Lyx using
the bat file that has been installed by the alternative installer.
They disappear very quickly (I do not have time to read their contents).
This is how it should be.
LyX is
Dear Lyx-list,
I want to use endnotes with hyperref. Endnotes are produced by:
- Footnote function from Lyx
- insert ERT '\theendnotes' (where endnotes should appear) and in preamble
\usepackage{endnotes}
\let\footnote=\endnote
However, the number of the endnotes are not 'clickable' which
Am 13.12.2009 14:10, schrieb Vincent van Ravesteijn:
LyX is programmed in a way that a console is always started. My and
also the standard installer hides it immediately.
The standard installer doesn't open this console window.
No, this installer does the same:
Section -Launch
# Start
On Sun, Dec 13, 2009, Julio Rojas wrote:
Dear all, I am using LyX with a book (Memoir) class to write my
thesis. I have seen that though the page number is on the right (left)
side of odd (even) pages, the inner margin (the biggest one) is also
to the right (left) side of odd (even) pages.
Thanks Dave. I have just checked the memoir class manual and have
found this fact. As I have no use for a bigger outer margin, but I'll
do for an inner one (bindings), I have added the anysize package to
the preamble:
\usepackage{anysize}
\marginsize{4.5cm}{3cm}{3cm}{3cm}
Thanks for your tip.
Uwe Stöhr schreef:
Am 13.12.2009 14:10, schrieb Vincent van Ravesteijn:
LyX is programmed in a way that a console is always started. My and
also the standard installer hides it immediately.
The standard installer doesn't open this console window.
Ok, I see some extra movement in the task
Am 13.12.2009 15:10, schrieb Vincent van Ravesteijn:
Ok, I see some extra movement in the task bar when opening LyX, ..
that's all.
I believe that with your installer, one can really see a window popping
up (or two).
This is correct, but they are closed immediately -- takes a few
Dear all,
I am experiencing a minor problem with the visualization of /ldots and I
wonder if it is specific to my installation.
When I insert an ellipsis with ALT-. Lyx sometimes inserts three regular-
looking black-colored dots, and sometimes it inserts three wider spaced blue
dots. The
Dear all
Out of these four, only \today seems to be working here in ERT (LyX
1.6.5, Debian testing, amd64). I get errors for any of \day, \month or
\year, commands that I found mentioned in this document [1].
Should I expect these commands to work with LyX? Alternatively, what
command should I
Liviu Andronic schreef:
Dear all
Out of these four, only \today seems to be working here in ERT (LyX
1.6.5, Debian testing, amd64). I get errors for any of \day, \month or
\year, commands that I found mentioned in this document [1].
Should I expect these commands to work with LyX?
Hi
I have some problems for to install a new layout.
I create a layout for the class au.cl of the journal Algebra Universalis
ht= tp://www.math.umanitoba.ca/homepages/au/instructions.html
First, I install the au.cl class in Miktex. The class is installed correctly
because I have checked with
On 12/13/2009 07:46 PM, Sergio Celani wrote:
Hi
I have some problems for to install a new layout.
I create a layout for the class au.cl of the journal Algebra Universalis
http://www.math.umanitoba.ca/homepages/au/instructions.html
I assume you have saved this as au.cls? I don't know for sure,
Thanks for all your comments, but I am confused now.
Could you please provide an example LyX file and neccesary commands which
need to be executed in the shell (Linux)? Just that I see how it works.
Cheers,
Rainer
On Fri, Dec 11, 2009 at 7:57 PM, Julien Rioux julien.ri...@gmail.comwrote:
Hi
I want to execute a command whenever I compile a compile a LyX file (pdf,
dvi, ps, ...) to save the output from svn info ... to a file to be able to
use it
I thought about using a copier, but which one do I have to use?
Am I right in assuming, thet a copier as below would do what I want?
Sorry - the copier should read:
###
#!/bin/bash
FROM=$1
TO=$2
TODIR=`dirname $TO`
svn info $FROM $TODIR/svninfo.txt
###
Rainer
On Mon, Dec 14, 2009 at 9:51 AM, Rainer M Krug r.m.k...@gmail.com wrote:
Hi
I want to
Dear all, I am using LyX with a book (Memoir) class to write my
thesis. I have seen that though the page number is on the right (left)
side of odd (even) pages, the inner margin (the biggest one) is also
to the right (left) side of odd (even) pages. So, the page number is
always on the same side
Uwe Stöhr schreef:
Murat Yildizoglu schrieb:
I can see two console windows opening each time I launch Lyx using
the bat file that has been installed by the alternative installer.
They disappear very quickly (I do not have time to read their contents).
This is how it should be.
LyX is
Dear Lyx-list,
I want to use endnotes with hyperref. Endnotes are produced by:
- Footnote function from Lyx
- insert ERT '\theendnotes' (where endnotes should appear) and in preamble
\usepackage{endnotes}
\let\footnote=\endnote
However, the number of the endnotes are not 'clickable' which
Am 13.12.2009 14:10, schrieb Vincent van Ravesteijn:
LyX is programmed in a way that a console is always started. My and
also the standard installer hides it immediately.
The standard installer doesn't open this console window.
No, this installer does the same:
Section -Launch
# Start
On Sun, Dec 13, 2009, Julio Rojas wrote:
> Dear all, I am using LyX with a book (Memoir) class to write my
> thesis. I have seen that though the page number is on the right (left)
> side of odd (even) pages, the inner margin (the biggest one) is also
> to the right (left) side of odd (even)
Thanks Dave. I have just checked the "memoir" class manual and have
found this fact. As I have no use for a bigger outer margin, but I'll
do for an inner one (bindings), I have added the "anysize" package to
the preamble:
\usepackage{anysize}
\marginsize{4.5cm}{3cm}{3cm}{3cm}
Thanks for your
Uwe Stöhr schreef:
Am 13.12.2009 14:10, schrieb Vincent van Ravesteijn:
LyX is programmed in a way that a console is always started. My and
also the standard installer hides it immediately.
The standard installer doesn't open this console window.
Ok, I see some extra movement in the task
Am 13.12.2009 15:10, schrieb Vincent van Ravesteijn:
Ok, I see some extra movement in the task bar when opening LyX, ..
that's all.
I believe that with your installer, one can really see a window popping
up (or two).
This is correct, but they are closed immediately -- takes a few
Dear all,
I am experiencing a minor problem with the visualization of /ldots and I
wonder if it is specific to my installation.
When I insert an ellipsis with ALT-. Lyx sometimes inserts three regular-
looking black-colored dots, and sometimes it inserts three wider spaced blue
dots. The
Dear all
Out of these four, only \today seems to be working here in ERT (LyX
1.6.5, Debian testing, amd64). I get errors for any of \day, \month or
\year, commands that I found mentioned in this document [1].
Should I expect these commands to work with LyX? Alternatively, what
command should I
Liviu Andronic schreef:
Dear all
Out of these four, only \today seems to be working here in ERT (LyX
1.6.5, Debian testing, amd64). I get errors for any of \day, \month or
\year, commands that I found mentioned in this document [1].
Should I expect these commands to work with LyX?
Hi
I have some problems for to install a new layout.
I create a layout for the class au.cl of the journal Algebra Universalis
ht= tp://www.math.umanitoba.ca/homepages/au/instructions.html
First, I install the au.cl class in Miktex. The class is installed correctly
because I have checked with
On 12/13/2009 07:46 PM, Sergio Celani wrote:
Hi
I have some problems for to install a new layout.
I create a layout for the class au.cl of the journal Algebra Universalis
http://www.math.umanitoba.ca/homepages/au/instructions.html
I assume you have saved this as au.cls? I don't know for sure,
Thanks for all your comments, but I am confused now.
Could you please provide an example LyX file and neccesary commands which
need to be executed in the shell (Linux)? Just that I see how it works.
Cheers,
Rainer
On Fri, Dec 11, 2009 at 7:57 PM, Julien Rioux wrote:
>
Hi
I want to execute a command whenever I compile a compile a LyX file (pdf,
dvi, ps, ...) to save the output from "svn info ..." to a file to be able to
use it
I thought about using a copier, but which one do I have to use?
Am I right in assuming, thet a copier as below would do what I want?
Sorry - the copier should read:
###
#!/bin/bash
FROM=$1
TO=$2
TODIR=`dirname $TO`
svn info $FROM > $TODIR/svninfo.txt
###
Rainer
On Mon, Dec 14, 2009 at 9:51 AM, Rainer M Krug wrote:
> Hi
>
> I
48 matches
Mail list logo