Lyx 2.0 can't read Lyx 1.6.x documents

[Ralf Glaser, track IT]

I'm running Lyx on a Windows XP system and tried to upgrade from 1.6.7 
to 2.0.

Unfortunately Lyx failes to open 1.6 files with the following message:
“\Buffer_convertLyxFormat.h is not a readable LyX document”

I tried upgrading to 1.6.9 before moving on to 2.0 with the following 
result:

1.6.9 can handle 1.6.7 files.
2.0 can't handle files created with any 1.6 version.

Any suggestions welcome as i'm really stuck here...

Re: Lyx 2.0 can't read Lyx 1.6.x documents

[Jürgen Spitzmüller]

Ralf Glaser, track IT wrote:
 I'm running Lyx on a Windows XP system and tried to upgrade from 1.6.7
 to 2.0.
 Unfortunately Lyx failes to open 1.6 files with the following message:
 “\Buffer_convertLyxFormat.h is not a readable LyX document”
 
 I tried upgrading to 1.6.9 before moving on to 2.0 with the following
 result:
 1.6.9 can handle 1.6.7 files.
 2.0 can't handle files created with any 1.6 version.
 
 Any suggestions welcome as i'm really stuck here...

If you send my the file in private mail, I can have a look.

Regards,
Jürgen

Re: rotate longtables in lyx

[Marcelo Acuña]

Thanks Liviu
 I download the module, put in lyx dir, go to config document   modules, add 
the module but...
How I use it?
I put in a ERT \begin{longlandscapetable} and get undefinid

Marcelo







El día martes, 4 de febrero de 2014 20:12, Liviu Andronic 
landronim...@gmail.com escribió:
 
On Tue, Feb 4, 2014 at 6:58 PM, Marcelo Acuña marceloacu...@yahoo.com wrote:
 hello
  I want rotate a longtable created in lyx and that became landscape.
  How I can get that?

http://wiki.lyx.org/Layouts/Modules#toc4

Liviu



 Thanks
 Marcelo



-- 
Do you know how to read?
http://www.alienetworks.com/srtest.cfm
http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
Do you know how to write?
http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail

Re: rotate longtables in lyx

[Liviu Andronic]

On Fri, Feb 7, 2014 at 12:57 PM, Marcelo Acuña marceloacu...@yahoo.com wrote:
 Thanks Liviu
  I download the module, put in lyx dir, go to config document   modules,
 add the module but...
 How I use it?

You should use: Insert  Custom Inset  [whatever] (sorry, I don't
remember the name)

Liviu


 I put in a ERT \begin{longlandscapetable} and get undefinid

 Marcelo





 El día martes, 4 de febrero de 2014 20:12, Liviu Andronic
 landronim...@gmail.com escribió:
 On Tue, Feb 4, 2014 at 6:58 PM, Marcelo Acuña marceloacu...@yahoo.com
 wrote:
 hello
  I want rotate a longtable created in lyx and that became landscape.
  How I can get that?

 http://wiki.lyx.org/Layouts/Modules#toc4

 Liviu



 Thanks
 Marcelo




 --
 Do you know how to read?
 http://www.alienetworks.com/srtest.cfm
 http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
 Do you know how to write?
 http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail




-- 
Do you know how to read?
http://www.alienetworks.com/srtest.cfm
http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
Do you know how to write?
http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail

Bibliography As Non-Cited References

[Rich Shepard]

  I've read the bibliography chapter in the Users Manual, tried using the
bibliography environment, but do not produce the output I want. The document
class is KOMA-Script book. A clue stick is needed.

  In this book I do not cite references but want to include a reference
chapter at the end. References are stored in jabref and I can select a
reference in that database and copy the key to the LyX document by clicking
the jabref LyX button. This puts the grey box citation adjacent to the
bibliography environment key-1 [1], key-2 [2], etc. grey boxes. When I look
at the dvips preview I see only the key-? and not the full reference.

  I could use the bibtex environment instead but don't know where to put the
jabref keys so the full references show up in the bibliography at the end.

  How do I use jabref entries to create a list of un-cited references in the
LyX document?

Rich

Re: Bibliography As Non-Cited References

[Richard Heck]

On 02/07/2014 10:31 AM, Rich Shepard wrote:

  I've read the bibliography chapter in the Users Manual, tried using the
bibliography environment, but do not produce the output I want. The 
document

class is KOMA-Script book. A clue stick is needed.

  In this book I do not cite references but want to include a reference
chapter at the end. References are stored in jabref and I can select a
reference in that database and copy the key to the LyX document by 
clicking

the jabref LyX button. This puts the grey box citation adjacent to the
bibliography environment key-1 [1], key-2 [2], etc. grey boxes. When I 
look

at the dvips preview I see only the key-? and not the full reference.


If you use the bibliography environment, they you can't also use a 
BibTeX database. Rather, you just enter the citation manually.


  I could use the bibtex environment instead but don't know where to 
put the
jabref keys so the full references show up in the bibliography at the 
end.


It doesn't matter where you put them. What does matter is that, when you 
insert a key, you should click on it and choose Add to bibliography 
only as the citation style.


If you're going to add a bunch, then it is easiest to:
(i) Insert the bibtex inset (Insert List/TOC BibTeX bibliography) and 
choose your database.
(ii) Insert Citation, and select add all the entries you want to this 
single inset.

(iii) Set citation style to Add to bibliography only.

Richard

Re: Bibliography As Non-Cited References [RESOLVED]

[Rich Shepard]

On Fri, 7 Feb 2014, Richard Heck wrote:

If you use the bibliography environment, they you can't also use a BibTeX 
database. Rather, you just enter the citation manually.


Richard,

  That's what I thought.


If you're going to add a bunch, then it is easiest to:
(i) Insert the bibtex inset (Insert List/TOC BibTeX bibliography) and 
choose your database.
(ii) Insert Citation, and select add all the entries you want to this single 
inset.

(iii) Set citation style to Add to bibliography only.


  Thanks very much. This is exactly what I want.

Carpe weekend,

Rich

--
Richard B. Shepard, Ph.D.  |  Have knowledge, will travel.
Applied Ecosystem Services, Inc.   |
http://www.appl-ecosys.com Voice: 503-667-4517  Fax: 503-667-8863

Re: Bibliography As Non-Cited References

[Rich Shepard]

On Fri, 7 Feb 2014, Richard Heck wrote:

(ii) Insert Citation, and select add all the entries you want to this single 
inset.

(iii) Set citation style to Add to bibliography only.


Richard,

  I'm getting an 'undefined control sequence' with even a single entry:

...otect\astroncite{Albert}{2007}]{Albert2007}

The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., hobx'), type  ' and the correct
spelling (e.g., \hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

  I can provide the full error log if that helps.

  The entry shows 'Albert2007 (not cited)' and the bibliography content is
set to 'all references' and 'add bibliography to TOC'. I must have some
option mis-set.

Thanks,

Rich

Re: Bibliography As Non-Cited References

[Richard Heck]

On 02/07/2014 11:10 AM, Rich Shepard wrote:

On Fri, 7 Feb 2014, Richard Heck wrote:

(ii) Insert Citation, and select add all the entries you want to 
this single inset.

(iii) Set citation style to Add to bibliography only.


Richard,

  I'm getting an 'undefined control sequence' with even a single entry:

...otect\astroncite{Albert}{2007}]{Albert2007}

The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., hobx'), type ' and the correct
spelling (e.g., \hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

  I can provide the full error log if that helps.

  The entry shows 'Albert2007 (not cited)' and the bibliography 
content is

set to 'all references' and 'add bibliography to TOC'. I must have some
option mis-set.


In the BibTeX inset, you should have chosen a style. What did you choose?
This looks like astron.bst? If so, then I think you have to load astron.sty
manually in the preamble. (LyX doesn't know about those sorts of
requirements of style files.)

Richard

Re: Bibliography As Non-Cited References

[Rich Shepard]

On Fri, 7 Feb 2014, Richard Heck wrote:


In the BibTeX inset, you should have chosen a style. What did you choose?
This looks like astron.bst?


Richard,

  Actually, it's apa but I saw astron in the error log. And, your comments
pointed me to the solution:

  In the document settings I did not switch from the bibliography default to
natbib and bibtex. Once I made those changes the document compiled.

Many thanks, again,

Rich

--
Richard B. Shepard, Ph.D.  |  Have knowledge, will travel.
Applied Ecosystem Services, Inc.   |
http://www.appl-ecosys.com Voice: 503-667-4517  Fax: 503-667-8863

LyX 2.0.7 silent/unattended installation: /S doesn't work

[Frank Thommen]

Hi,

I'm currently trying to deploy LyX silently within our group.  I could 
find lots of references to the /S switch, which should be standard to 
NSIS installers.  However running the Installer (*not* the Bundle 
Installer) with this switch leaves me with a broken and unusable 
installation:


  * The menu items are not placed in a submenu in the Programs menu
  * MiKTeX/latex is not recognized and configured in LyX

How can one silently install LyX including the detection of MiKTeX/latex 
(which can be in an arbitrary path)?


frank

Re: LyX 2.0.7 silent/unattended installation: /S doesn't work

[Scott Kostyshak]

On Fri, Feb 7, 2014 at 12:21 PM, Frank Thommen
structures...@embl-heidelberg.de wrote:
 Hi,

 I'm currently trying to deploy LyX silently within our group.  I could find
 lots of references to the /S switch, which should be standard to NSIS
 installers.  However running the Installer (*not* the Bundle Installer) with
 this switch leaves me with a broken and unusable installation:

   * The menu items are not placed in a submenu in the Programs menu
   * MiKTeX/latex is not recognized and configured in LyX

 How can one silently install LyX including the detection of MiKTeX/latex
 (which can be in an arbitrary path)?

 frank

Hi Frank, I know nothing about the Windows installer so I won't be
able to help. But we had a recent thread that is related:

https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg181907.html

Best,

Scott

Re: LyX 2.0.7 silent/unattended installation: /S doesn't work

[Frank Thommen]

On 07.02.14 18:27, Scott Kostyshak wrote:

On Fri, Feb 7, 2014 at 12:21 PM, Frank Thommen
structures...@embl-heidelberg.de wrote:

Hi,

[...]However running the Installer (*not* the Bundle Installer) with
this switch leaves me with a broken and unusable installation:

   [...]


Hi Frank, I know nothing about the Windows installer so I won't be
able to help. But we had a recent thread that is related:

https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg181907.html


Thx, but the concrete thread deals with the UNinstaller.  I haven't come 
so far yet.  Still struggling with the INstaller. ;-)


I'll however try to get in contact with Øyvind.

Cheers
frank

LyX 2.0.7 inverse search broken

[Joon Ro]

Hi,

I just found that with the exact same setting, inverse search which worked
fine in LyX 2.0.6 does not work in LyX 2.0.7. (I just removed 2.0.7 and
reinstalled 2.0.6 to verify.)

I'm using LyX in Windows with SumatraPDF, with TexLive 2013. Is this a
known bug?

Best,
Joon

Lyx 2.0 can't read Lyx 1.6.x documents

[Ralf Glaser, track IT]

I'm running Lyx on a Windows XP system and tried to upgrade from 1.6.7 
to 2.0.

Unfortunately Lyx failes to open 1.6 files with the following message:
“\Buffer_convertLyxFormat.h is not a readable LyX document”

I tried upgrading to 1.6.9 before moving on to 2.0 with the following 
result:

1.6.9 can handle 1.6.7 files.
2.0 can't handle files created with any 1.6 version.

Any suggestions welcome as i'm really stuck here...

Re: Lyx 2.0 can't read Lyx 1.6.x documents

[Jürgen Spitzmüller]

Ralf Glaser, track IT wrote:
 I'm running Lyx on a Windows XP system and tried to upgrade from 1.6.7
 to 2.0.
 Unfortunately Lyx failes to open 1.6 files with the following message:
 “\Buffer_convertLyxFormat.h is not a readable LyX document”
 
 I tried upgrading to 1.6.9 before moving on to 2.0 with the following
 result:
 1.6.9 can handle 1.6.7 files.
 2.0 can't handle files created with any 1.6 version.
 
 Any suggestions welcome as i'm really stuck here...

If you send my the file in private mail, I can have a look.

Regards,
Jürgen

Re: rotate longtables in lyx

[Marcelo Acuña]

Thanks Liviu
 I download the module, put in lyx dir, go to config document   modules, add 
the module but...
How I use it?
I put in a ERT \begin{longlandscapetable} and get undefinid

Marcelo







El día martes, 4 de febrero de 2014 20:12, Liviu Andronic 
landronim...@gmail.com escribió:
 
On Tue, Feb 4, 2014 at 6:58 PM, Marcelo Acuña marceloacu...@yahoo.com wrote:
 hello
  I want rotate a longtable created in lyx and that became landscape.
  How I can get that?

http://wiki.lyx.org/Layouts/Modules#toc4

Liviu



 Thanks
 Marcelo



-- 
Do you know how to read?
http://www.alienetworks.com/srtest.cfm
http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
Do you know how to write?
http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail

Re: rotate longtables in lyx

[Liviu Andronic]

On Fri, Feb 7, 2014 at 12:57 PM, Marcelo Acuña marceloacu...@yahoo.com wrote:
 Thanks Liviu
  I download the module, put in lyx dir, go to config document   modules,
 add the module but...
 How I use it?

You should use: Insert  Custom Inset  [whatever] (sorry, I don't
remember the name)

Liviu


 I put in a ERT \begin{longlandscapetable} and get undefinid

 Marcelo





 El día martes, 4 de febrero de 2014 20:12, Liviu Andronic
 landronim...@gmail.com escribió:
 On Tue, Feb 4, 2014 at 6:58 PM, Marcelo Acuña marceloacu...@yahoo.com
 wrote:
 hello
  I want rotate a longtable created in lyx and that became landscape.
  How I can get that?

 http://wiki.lyx.org/Layouts/Modules#toc4

 Liviu



 Thanks
 Marcelo




 --
 Do you know how to read?
 http://www.alienetworks.com/srtest.cfm
 http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
 Do you know how to write?
 http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail




-- 
Do you know how to read?
http://www.alienetworks.com/srtest.cfm
http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
Do you know how to write?
http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail

Bibliography As Non-Cited References

[Rich Shepard]

  I've read the bibliography chapter in the Users Manual, tried using the
bibliography environment, but do not produce the output I want. The document
class is KOMA-Script book. A clue stick is needed.

  In this book I do not cite references but want to include a reference
chapter at the end. References are stored in jabref and I can select a
reference in that database and copy the key to the LyX document by clicking
the jabref LyX button. This puts the grey box citation adjacent to the
bibliography environment key-1 [1], key-2 [2], etc. grey boxes. When I look
at the dvips preview I see only the key-? and not the full reference.

  I could use the bibtex environment instead but don't know where to put the
jabref keys so the full references show up in the bibliography at the end.

  How do I use jabref entries to create a list of un-cited references in the
LyX document?

Rich

Re: Bibliography As Non-Cited References

[Richard Heck]

On 02/07/2014 10:31 AM, Rich Shepard wrote:

  I've read the bibliography chapter in the Users Manual, tried using the
bibliography environment, but do not produce the output I want. The 
document

class is KOMA-Script book. A clue stick is needed.

  In this book I do not cite references but want to include a reference
chapter at the end. References are stored in jabref and I can select a
reference in that database and copy the key to the LyX document by 
clicking

the jabref LyX button. This puts the grey box citation adjacent to the
bibliography environment key-1 [1], key-2 [2], etc. grey boxes. When I 
look

at the dvips preview I see only the key-? and not the full reference.


If you use the bibliography environment, they you can't also use a 
BibTeX database. Rather, you just enter the citation manually.


  I could use the bibtex environment instead but don't know where to 
put the
jabref keys so the full references show up in the bibliography at the 
end.


It doesn't matter where you put them. What does matter is that, when you 
insert a key, you should click on it and choose Add to bibliography 
only as the citation style.


If you're going to add a bunch, then it is easiest to:
(i) Insert the bibtex inset (Insert List/TOC BibTeX bibliography) and 
choose your database.
(ii) Insert Citation, and select add all the entries you want to this 
single inset.

(iii) Set citation style to Add to bibliography only.

Richard

Re: Bibliography As Non-Cited References [RESOLVED]

[Rich Shepard]

On Fri, 7 Feb 2014, Richard Heck wrote:

If you use the bibliography environment, they you can't also use a BibTeX 
database. Rather, you just enter the citation manually.


Richard,

  That's what I thought.


If you're going to add a bunch, then it is easiest to:
(i) Insert the bibtex inset (Insert List/TOC BibTeX bibliography) and 
choose your database.
(ii) Insert Citation, and select add all the entries you want to this single 
inset.

(iii) Set citation style to Add to bibliography only.


  Thanks very much. This is exactly what I want.

Carpe weekend,

Rich

--
Richard B. Shepard, Ph.D.  |  Have knowledge, will travel.
Applied Ecosystem Services, Inc.   |
http://www.appl-ecosys.com Voice: 503-667-4517  Fax: 503-667-8863

Re: Bibliography As Non-Cited References

[Rich Shepard]

On Fri, 7 Feb 2014, Richard Heck wrote:

(ii) Insert Citation, and select add all the entries you want to this single 
inset.

(iii) Set citation style to Add to bibliography only.


Richard,

  I'm getting an 'undefined control sequence' with even a single entry:

...otect\astroncite{Albert}{2007}]{Albert2007}

The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., hobx'), type  ' and the correct
spelling (e.g., \hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

  I can provide the full error log if that helps.

  The entry shows 'Albert2007 (not cited)' and the bibliography content is
set to 'all references' and 'add bibliography to TOC'. I must have some
option mis-set.

Thanks,

Rich

Re: Bibliography As Non-Cited References

[Richard Heck]

On 02/07/2014 11:10 AM, Rich Shepard wrote:

On Fri, 7 Feb 2014, Richard Heck wrote:

(ii) Insert Citation, and select add all the entries you want to 
this single inset.

(iii) Set citation style to Add to bibliography only.


Richard,

  I'm getting an 'undefined control sequence' with even a single entry:

...otect\astroncite{Albert}{2007}]{Albert2007}

The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., hobx'), type ' and the correct
spelling (e.g., \hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

  I can provide the full error log if that helps.

  The entry shows 'Albert2007 (not cited)' and the bibliography 
content is

set to 'all references' and 'add bibliography to TOC'. I must have some
option mis-set.


In the BibTeX inset, you should have chosen a style. What did you choose?
This looks like astron.bst? If so, then I think you have to load astron.sty
manually in the preamble. (LyX doesn't know about those sorts of
requirements of style files.)

Richard

Re: Bibliography As Non-Cited References

[Rich Shepard]

On Fri, 7 Feb 2014, Richard Heck wrote:


In the BibTeX inset, you should have chosen a style. What did you choose?
This looks like astron.bst?


Richard,

  Actually, it's apa but I saw astron in the error log. And, your comments
pointed me to the solution:

  In the document settings I did not switch from the bibliography default to
natbib and bibtex. Once I made those changes the document compiled.

Many thanks, again,

Rich

--
Richard B. Shepard, Ph.D.  |  Have knowledge, will travel.
Applied Ecosystem Services, Inc.   |
http://www.appl-ecosys.com Voice: 503-667-4517  Fax: 503-667-8863

LyX 2.0.7 silent/unattended installation: /S doesn't work

[Frank Thommen]

Hi,

I'm currently trying to deploy LyX silently within our group.  I could 
find lots of references to the /S switch, which should be standard to 
NSIS installers.  However running the Installer (*not* the Bundle 
Installer) with this switch leaves me with a broken and unusable 
installation:


  * The menu items are not placed in a submenu in the Programs menu
  * MiKTeX/latex is not recognized and configured in LyX

How can one silently install LyX including the detection of MiKTeX/latex 
(which can be in an arbitrary path)?


frank

Re: LyX 2.0.7 silent/unattended installation: /S doesn't work

[Scott Kostyshak]

On Fri, Feb 7, 2014 at 12:21 PM, Frank Thommen
structures...@embl-heidelberg.de wrote:
 Hi,

 I'm currently trying to deploy LyX silently within our group.  I could find
 lots of references to the /S switch, which should be standard to NSIS
 installers.  However running the Installer (*not* the Bundle Installer) with
 this switch leaves me with a broken and unusable installation:

   * The menu items are not placed in a submenu in the Programs menu
   * MiKTeX/latex is not recognized and configured in LyX

 How can one silently install LyX including the detection of MiKTeX/latex
 (which can be in an arbitrary path)?

 frank

Hi Frank, I know nothing about the Windows installer so I won't be
able to help. But we had a recent thread that is related:

https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg181907.html

Best,

Scott

Re: LyX 2.0.7 silent/unattended installation: /S doesn't work

[Frank Thommen]

On 07.02.14 18:27, Scott Kostyshak wrote:

On Fri, Feb 7, 2014 at 12:21 PM, Frank Thommen
structures...@embl-heidelberg.de wrote:

Hi,

[...]However running the Installer (*not* the Bundle Installer) with
this switch leaves me with a broken and unusable installation:

   [...]


Hi Frank, I know nothing about the Windows installer so I won't be
able to help. But we had a recent thread that is related:

https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg181907.html


Thx, but the concrete thread deals with the UNinstaller.  I haven't come 
so far yet.  Still struggling with the INstaller. ;-)


I'll however try to get in contact with Øyvind.

Cheers
frank

LyX 2.0.7 inverse search broken

[Joon Ro]

Hi,

I just found that with the exact same setting, inverse search which worked
fine in LyX 2.0.6 does not work in LyX 2.0.7. (I just removed 2.0.7 and
reinstalled 2.0.6 to verify.)

I'm using LyX in Windows with SumatraPDF, with TexLive 2013. Is this a
known bug?

Best,
Joon

Lyx 2.0 can't read Lyx 1.6.x documents

[Ralf Glaser, track IT]

I'm running Lyx on a Windows XP system and tried to upgrade from 1.6.7 
to 2.0.

Unfortunately Lyx failes to open 1.6 files with the following message:
“\Buffer_convertLyxFormat.h is not a readable LyX document”

I tried upgrading to 1.6.9 before moving on to 2.0 with the following 
result:

1.6.9 can handle 1.6.7 files.
2.0 can't handle files created with any 1.6 version.

Any suggestions welcome as i'm really stuck here...

Re: Lyx 2.0 can't read Lyx 1.6.x documents

[Jürgen Spitzmüller]

Ralf Glaser, track IT wrote:
> I'm running Lyx on a Windows XP system and tried to upgrade from 1.6.7
> to 2.0.
> Unfortunately Lyx failes to open 1.6 files with the following message:
> “\Buffer_convertLyxFormat.h is not a readable LyX document”
> 
> I tried upgrading to 1.6.9 before moving on to 2.0 with the following
> result:
> 1.6.9 can handle 1.6.7 files.
> 2.0 can't handle files created with any 1.6 version.
> 
> Any suggestions welcome as i'm really stuck here...

If you send my the file in private mail, I can have a look.

Regards,
Jürgen

Re: rotate longtables in lyx

[Marcelo Acuña]

Thanks Liviu
 I download the module, put in lyx dir, go to config document  > modules, add 
the module but...
How I use it?
I put in a ERT \begin{longlandscapetable} and get undefinid

Marcelo







El día martes, 4 de febrero de 2014 20:12, Liviu Andronic 
 escribió:
 
On Tue, Feb 4, 2014 at 6:58 PM, Marcelo Acuña  wrote:
> hello
>  I want rotate a longtable created in lyx and that became landscape.
>  How I can get that?
>
http://wiki.lyx.org/Layouts/Modules#toc4

Liviu



> Thanks
> Marcelo



-- 
Do you know how to read?
http://www.alienetworks.com/srtest.cfm
http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
Do you know how to write?
http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail

Re: rotate longtables in lyx

[Liviu Andronic]

On Fri, Feb 7, 2014 at 12:57 PM, Marcelo Acuña  wrote:
> Thanks Liviu
>  I download the module, put in lyx dir, go to config document  > modules,
> add the module but...
> How I use it?
>
You should use: Insert > Custom Inset > [whatever] (sorry, I don't
remember the name)

Liviu


> I put in a ERT \begin{longlandscapetable} and get undefinid
>
> Marcelo
>
>
>
>
>
> El día martes, 4 de febrero de 2014 20:12, Liviu Andronic
>  escribió:
> On Tue, Feb 4, 2014 at 6:58 PM, Marcelo Acuña 
> wrote:
>> hello
>>  I want rotate a longtable created in lyx and that became landscape.
>>  How I can get that?
>>
> http://wiki.lyx.org/Layouts/Modules#toc4
>
> Liviu
>
>
>
>> Thanks
>> Marcelo
>
>
>
>
> --
> Do you know how to read?
> http://www.alienetworks.com/srtest.cfm
> http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
> Do you know how to write?
> http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail
>



-- 
Do you know how to read?
http://www.alienetworks.com/srtest.cfm
http://goodies.xfce.org/projects/applications/xfce4-dict#speed-reader
Do you know how to write?
http://garbl.home.comcast.net/~garbl/stylemanual/e.htm#e-mail

Bibliography As Non-Cited References

[Rich Shepard]

  I've read the bibliography chapter in the Users Manual, tried using the
bibliography environment, but do not produce the output I want. The document
class is KOMA-Script book. A clue stick is needed.

  In this book I do not cite references but want to include a reference
chapter at the end. References are stored in jabref and I can select a
reference in that database and copy the key to the LyX document by clicking
the jabref LyX button. This puts the grey box citation adjacent to the
bibliography environment key-1 [1], key-2 [2], etc. grey boxes. When I look
at the dvips preview I see only the key-? and not the full reference.

  I could use the bibtex environment instead but don't know where to put the
jabref keys so the full references show up in the bibliography at the end.

  How do I use jabref entries to create a list of un-cited references in the
LyX document?

Rich

Re: Bibliography As Non-Cited References

[Richard Heck]

On 02/07/2014 10:31 AM, Rich Shepard wrote:

  I've read the bibliography chapter in the Users Manual, tried using the
bibliography environment, but do not produce the output I want. The 
document

class is KOMA-Script book. A clue stick is needed.

  In this book I do not cite references but want to include a reference
chapter at the end. References are stored in jabref and I can select a
reference in that database and copy the key to the LyX document by 
clicking

the jabref LyX button. This puts the grey box citation adjacent to the
bibliography environment key-1 [1], key-2 [2], etc. grey boxes. When I 
look

at the dvips preview I see only the key-? and not the full reference.


If you use the bibliography environment, they you can't also use a 
BibTeX database. Rather, you just enter the citation manually.


  I could use the bibtex environment instead but don't know where to 
put the
jabref keys so the full references show up in the bibliography at the 
end.


It doesn't matter where you put them. What does matter is that, when you 
insert a key, you should click on it and choose "Add to bibliography 
only" as the citation style.


If you're going to add a bunch, then it is easiest to:
(i) Insert the bibtex inset (Insert> List/TOC> BibTeX bibliography) and 
choose your database.
(ii) Insert> Citation, and select add all the entries you want to this 
single inset.

(iii) Set citation style to "Add to bibliography only".

Richard

Re: Bibliography As Non-Cited References [RESOLVED]

[Rich Shepard]

On Fri, 7 Feb 2014, Richard Heck wrote:

If you use the bibliography environment, they you can't also use a BibTeX 
database. Rather, you just enter the citation manually.


Richard,

  That's what I thought.


If you're going to add a bunch, then it is easiest to:
(i) Insert the bibtex inset (Insert> List/TOC> BibTeX bibliography) and 
choose your database.
(ii) Insert> Citation, and select add all the entries you want to this single 
inset.

(iii) Set citation style to "Add to bibliography only".


  Thanks very much. This is exactly what I want.

Carpe weekend,

Rich

--
Richard B. Shepard, Ph.D.  |  Have knowledge, will travel.
Applied Ecosystem Services, Inc.   |
 Voice: 503-667-4517  Fax: 503-667-8863

Re: Bibliography As Non-Cited References

[Rich Shepard]

On Fri, 7 Feb 2014, Richard Heck wrote:

(ii) Insert> Citation, and select add all the entries you want to this single 
inset.

(iii) Set citation style to "Add to bibliography only".


Richard,

  I'm getting an 'undefined control sequence' with even a single entry:

...otect\astroncite{Albert}{2007}]{Albert2007}

The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., hobx'), type  ' and the correct
spelling (e.g., \hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

  I can provide the full error log if that helps.

  The entry shows 'Albert2007 (not cited)' and the bibliography content is
set to 'all references' and 'add bibliography to TOC'. I must have some
option mis-set.

Thanks,

Rich

Re: Bibliography As Non-Cited References

[Richard Heck]

On 02/07/2014 11:10 AM, Rich Shepard wrote:

On Fri, 7 Feb 2014, Richard Heck wrote:

(ii) Insert> Citation, and select add all the entries you want to 
this single inset.

(iii) Set citation style to "Add to bibliography only".


Richard,

  I'm getting an 'undefined control sequence' with even a single entry:

...otect\astroncite{Albert}{2007}]{Albert2007}

The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., hobx'), type ' and the correct
spelling (e.g., \hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

  I can provide the full error log if that helps.

  The entry shows 'Albert2007 (not cited)' and the bibliography 
content is

set to 'all references' and 'add bibliography to TOC'. I must have some
option mis-set.


In the BibTeX inset, you should have chosen a style. What did you choose?
This looks like astron.bst? If so, then I think you have to load astron.sty
manually in the preamble. (LyX doesn't know about those sorts of
requirements of style files.)

Richard

Re: Bibliography As Non-Cited References

[Rich Shepard]

On Fri, 7 Feb 2014, Richard Heck wrote:


In the BibTeX inset, you should have chosen a style. What did you choose?
This looks like astron.bst?


Richard,

  Actually, it's apa but I saw astron in the error log. And, your comments
pointed me to the solution:

  In the document settings I did not switch from the bibliography default to
natbib and bibtex. Once I made those changes the document compiled.

Many thanks, again,

Rich

--
Richard B. Shepard, Ph.D.  |  Have knowledge, will travel.
Applied Ecosystem Services, Inc.   |
 Voice: 503-667-4517  Fax: 503-667-8863

LyX 2.0.7 silent/unattended installation: /S doesn't work

[Frank Thommen]

Hi,

I'm currently trying to deploy LyX silently within our group.  I could 
find lots of references to the "/S" switch, which should be standard to 
NSIS installers.  However running the Installer (*not* the Bundle 
Installer) with this switch leaves me with a broken and unusable 
installation:


  * The menu items are not placed in a submenu in the Programs menu
  * MiKTeX/latex is not recognized and configured in LyX

How can one silently install LyX including the detection of MiKTeX/latex 
(which can be in an arbitrary path)?


frank

Re: LyX 2.0.7 silent/unattended installation: /S doesn't work

[Scott Kostyshak]

On Fri, Feb 7, 2014 at 12:21 PM, Frank Thommen
 wrote:
> Hi,
>
> I'm currently trying to deploy LyX silently within our group.  I could find
> lots of references to the "/S" switch, which should be standard to NSIS
> installers.  However running the Installer (*not* the Bundle Installer) with
> this switch leaves me with a broken and unusable installation:
>
>   * The menu items are not placed in a submenu in the Programs menu
>   * MiKTeX/latex is not recognized and configured in LyX
>
> How can one silently install LyX including the detection of MiKTeX/latex
> (which can be in an arbitrary path)?
>
> frank

Hi Frank, I know nothing about the Windows installer so I won't be
able to help. But we had a recent thread that is related:

https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg181907.html

Best,

Scott

Re: LyX 2.0.7 silent/unattended installation: /S doesn't work

[Frank Thommen]

On 07.02.14 18:27, Scott Kostyshak wrote:

On Fri, Feb 7, 2014 at 12:21 PM, Frank Thommen
 wrote:

Hi,

[...]However running the Installer (*not* the Bundle Installer) with
this switch leaves me with a broken and unusable installation:

   [...]


Hi Frank, I know nothing about the Windows installer so I won't be
able to help. But we had a recent thread that is related:

https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg181907.html


Thx, but the concrete thread deals with the UNinstaller.  I haven't come 
so far yet.  Still struggling with the INstaller. ;-)


I'll however try to get in contact with Øyvind.

Cheers
frank

LyX 2.0.7 inverse search broken

[Joon Ro]

Hi,

I just found that with the exact same setting, inverse search which worked
fine in LyX 2.0.6 does not work in LyX 2.0.7. (I just removed 2.0.7 and
reinstalled 2.0.6 to verify.)

I'm using LyX in Windows with SumatraPDF, with TexLive 2013. Is this a
known bug?

Best,
Joon