Hello,
I have written a simple layout that adds support for the authblk package
to the basic article layout. Is there a way to submit it to the LyX
community?
Logan Kelly
it is
showing in the Output pane gives no further detail than the pop-up box!
(Auto-edit file file path failed (time stamp) Automatic save done.
Error: Cannot edit file) Any further help is welcome.
thanks,
Kelly
it is
showing in the Output pane gives no further detail than the pop-up box!
(Auto-edit file file path failed (time stamp) Automatic save done.
Error: Cannot edit file) Any further help is welcome.
thanks,
Kelly
on. I did as you said and "Files used by LyX"
are now set to Yes for debug messages. However, the message it is
showing in the Output pane gives no further detail than the pop-up box!
("Auto-edit file "file path" failed (time stamp) Automatic save done.
Error: Cannot edit file") Any further help is welcome.
thanks,
Kelly
7 btw.Thanks!
Hi Dan,
Did you ever find a solution to this problem? I have been having the same
problem since around 2011. (And I don't understand Richard's suggestions!)
thanks,
Kelly
7 btw.Thanks!
Hi Dan,
Did you ever find a solution to this problem? I have been having the same
problem since around 2011. (And I don't understand Richard's suggestions!)
thanks,
Kelly
ething specific. I'm on
Windows 7 btw.Thanks!
Hi Dan,
Did you ever find a solution to this problem? I have been having the same
problem since around 2011. (And I don't understand Richard's suggestions!)
thanks,
Kelly
I am trying to use ejbib.bst that was provided to me by the Economic Journal.
I couldn't get it to work so I created a custom file using makebst, which I
called econjournal.bst. I ran the dbj file to create the .bst and copied the
.bst into user/appdata/roaming/miktek/2.9/bibtex/bst/ in its
I am trying to use ejbib.bst that was provided to me by the Economic Journal.
I couldn't get it to work so I created a custom file using makebst, which I
called econjournal.bst. I ran the dbj file to create the .bst and copied the
.bst into user/appdata/roaming/miktek/2.9/bibtex/bst/ in its
I am trying to use ejbib.bst that was provided to me by the Economic Journal.
I couldn't get it to work so I created a custom file using makebst, which I
called econjournal.bst. I ran the dbj file to create the .bst and copied the
.bst into user/appdata/roaming/miktek/2.9/bibtex/bst/ in its
more info is available at:
http://www.uxproductivity.com/blog/
http://ffeathers.wordpress.com/2012/04/20/new-text-processor-for-ios-ux-write-looking-for-beta-testers/
Many thanks in advance,
Andrew Smith (Year 1 - Mathematical Sciences)
--
Dr. Peter M. Kelly
kelly...@gmail.com
http
more info is available at:
http://www.uxproductivity.com/blog/
http://ffeathers.wordpress.com/2012/04/20/new-text-processor-for-ios-ux-write-looking-for-beta-testers/
Many thanks in advance,
Andrew Smith (Year 1 - Mathematical Sciences)
--
Dr. Peter M. Kelly
kelly...@gmail.com
http
ry if you're interested.
Some more info is available at:
http://www.uxproductivity.com/blog/
http://ffeathers.wordpress.com/2012/04/20/new-text-processor-for-ios-ux-write-looking-for-beta-testers/
> Many thanks in advance,
>
> Andrew Smith (Year 1 - Mathematical Sciences)
--
Dr. Peter
Ok, sure thing - I'll write to the Devel list now... thanks for all your
help...
Jack
On 5 December 2011 19:02, Richard Heck rgh...@comcast.net wrote:
On 12/05/2011 12:45 PM, Daniel Kelly (aka Jack) wrote:
I've found a (horrible) hack which I'll describe here because it helps to
explain
Ok, sure thing - I'll write to the Devel list now... thanks for all your
help...
Jack
On 5 December 2011 19:02, Richard Heck rgh...@comcast.net wrote:
On 12/05/2011 12:45 PM, Daniel Kelly (aka Jack) wrote:
I've found a (horrible) hack which I'll describe here because it helps to
explain
Ok, sure thing - I'll write to the Devel list now... thanks for all your
help...
Jack
On 5 December 2011 19:02, Richard Heck <rgh...@comcast.net> wrote:
> On 12/05/2011 12:45 PM, Daniel Kelly (aka Jack) wrote:
>
> I've found a (horrible) hack which I'll describe here b
Ah, fantastic - Lyx 2.0.2 seems to have fixed the problem I was having with
epstopdf. Many thanks!
Jack
Bother, sorry, please ignore my last message.
It turns out that Lyx 2.0.2 does *not* fix the epstopdf problem, sorry.
When I wrote my previous email, I had forgotten to delete the
-eps-converted-to.pdf files. Now that I have deleted the temporary
-eps-converted-to.pdf files, Lyx fails to
I've found a (horrible) hack which I'll describe here because it helps to
explain the problem.
The basic problem is that epstopdf has no way to know which directory the
eps file lives in because Lyx runs epstopdf in a temp directory. My
horrible hack is to edit line 304 of epstopdf.pl and change
Ah, fantastic - Lyx 2.0.2 seems to have fixed the problem I was having with
epstopdf. Many thanks!
Jack
Bother, sorry, please ignore my last message.
It turns out that Lyx 2.0.2 does *not* fix the epstopdf problem, sorry.
When I wrote my previous email, I had forgotten to delete the
-eps-converted-to.pdf files. Now that I have deleted the temporary
-eps-converted-to.pdf files, Lyx fails to
I've found a (horrible) hack which I'll describe here because it helps to
explain the problem.
The basic problem is that epstopdf has no way to know which directory the
eps file lives in because Lyx runs epstopdf in a temp directory. My
horrible hack is to edit line 304 of epstopdf.pl and change
Ah, fantastic - Lyx 2.0.2 seems to have fixed the problem I was having with
epstopdf. Many thanks!
Jack
Bother, sorry, please ignore my last message.
It turns out that Lyx 2.0.2 does *not* fix the epstopdf problem, sorry.
When I wrote my previous email, I had forgotten to delete the
"-eps-converted-to.pdf" files. Now that I have deleted the temporary
"-eps-converted-to.pdf" files, Lyx fails to
I've found a (horrible) hack which I'll describe here because it helps to
explain the problem.
The basic problem is that epstopdf has no way to know which directory the
eps file lives in because Lyx runs epstopdf in a temp directory. My
horrible hack is to edit line 304 of epstopdf.pl and change
Hi Richard,
Many thanks for the quick reply. Sorry, I should have mentioned that
I already read the release notes for 2.0.1. Like you, I suspect the
problem with using epstopdf is related to the \input@path change in
2.0.1. Unfortunately, I can't see a solution (or a hint to a
solution) within
Hi Richard,
Many thanks for the quick reply. Sorry, I should have mentioned that
I already read the release notes for 2.0.1. Like you, I suspect the
problem with using epstopdf is related to the \input@path change in
2.0.1. Unfortunately, I can't see a solution (or a hint to a
solution) within
Hi Richard,
Many thanks for the quick reply. Sorry, I should have mentioned that
I already read the release notes for 2.0.1. Like you, I suspect the
problem with using epstopdf is related to the \input@path change in
2.0.1. Unfortunately, I can't see a solution (or a hint to a
solution) within
Dear Lyx Users,
I need to include lots of .eps graphics files in my Lyx document.
These .eps files are produced by GNUplot using the epslatex terminal
driver which produces a .tex files and a .eps file for each graph.
In Lyx 2.0.0, including my graphs was as simple as putting
\input{graph.tex}
Dear Lyx Users,
I need to include lots of .eps graphics files in my Lyx document.
These .eps files are produced by GNUplot using the epslatex terminal
driver which produces a .tex files and a .eps file for each graph.
In Lyx 2.0.0, including my graphs was as simple as putting
\input{graph.tex}
Dear Lyx Users,
I need to include lots of .eps graphics files in my Lyx document.
These .eps files are produced by GNUplot using the epslatex terminal
driver which produces a .tex files and a .eps file for each graph.
In Lyx 2.0.0, including my graphs was as simple as putting
\input{graph.tex}
Rich Talley rbtalley at unm.edu writes:
On Sat, Nov 27, 2010 at 3:31 PM, Kelly Kearney kkearney at princeton.edu
wrote:
So far, I haven't been able to figure out how to run Mac Lyx from the command
line. Any pointers?
Sure. In OS X, applications appear to the GUI as a single object
-newline mode?
Error: Cannot convert file
An error occurred whilst running python -tt
'/Applications/Lyx.app/Contents/Resourc
Thanks again,
Kelly
Rich Talley rbtalley at unm.edu writes:
On Sat, Nov 27, 2010 at 3:31 PM, Kelly Kearney kkearney at princeton.edu
wrote:
So far, I haven't been able to figure out how to run Mac Lyx from the command
line. Any pointers?
Sure. In OS X, applications appear to the GUI as a single object
-newline mode?
Error: Cannot convert file
An error occurred whilst running python -tt
'/Applications/Lyx.app/Contents/Resourc
Thanks again,
Kelly
Rich Talley unm.edu> writes:
>
>
> On Sat, Nov 27, 2010 at 3:31 PM, Kelly Kearney princeton.edu>
wrote:
> So far, I haven't been able to figure out how to run Mac Lyx from the command
> line. Any pointers?
>
>
> Sure. In OS X, applications appear
d to open the
file in universal-newline mode?
Error: Cannot convert file
An error occurred whilst running python -tt
'/Applications/Lyx.app/Contents/Resourc
Thanks again,
Kelly
José Matos wrote:
On Tuesday 23 November 2010 22:31:16 Kelly Kearney wrote:
An error occurred whilst running python -tt
'/Applications/LyX.app/Contents/Resourc
Is this the error you get?
The above error message seems to be truncated.
Jose, yes, this is the full error message
José Matos wrote:
On Tuesday 23 November 2010 22:31:16 Kelly Kearney wrote:
An error occurred whilst running python -tt
'/Applications/LyX.app/Contents/Resourc
Is this the error you get?
The above error message seems to be truncated.
Jose, yes, this is the full error message
José Matos wrote:
> > On Tuesday 23 November 2010 22:31:16 Kelly Kearney wrote:
> >> "An error occurred whilst running python -tt
> >>
> >> '/Applications/LyX.app/Contents/Resourc"
> > Is this the error you get?
> >
> > The above error
in the most recent Lyx release.
Thanks for any suggestions regarding this error.
-Kelly
in the most recent Lyx release.
Thanks for any suggestions regarding this error.
-Kelly
if it was
still necessary in the most recent Lyx release.
Thanks for any suggestions regarding this error.
-Kelly
On Wed, Mar 19, 2003 at 12:45:41PM -0500, Praedor Atrebates wrote:
checking for Qt library name... failed
configure: error: Cannot compile a simple Qt executable. Check you have the
right $QTDIR !
error: Bad exit status from /var/tmp/rpm-tmp.46146 (%build)
This is a problem in building
On Wed, Mar 19, 2003 at 12:45:41PM -0500, Praedor Atrebates wrote:
checking for Qt library name... failed
configure: error: Cannot compile a simple Qt executable. Check you have the
right $QTDIR !
error: Bad exit status from /var/tmp/rpm-tmp.46146 (%build)
This is a problem in building
On Wed, Mar 19, 2003 at 12:45:41PM -0500, Praedor Atrebates wrote:
> checking for Qt library name... failed
> configure: error: Cannot compile a simple Qt executable. Check you have the
> right $QTDIR !
> error: Bad exit status from /var/tmp/rpm-tmp.46146 (%build)
>
This is a problem in
If a table (within a table float) is rotated 90 degrees is there an easy
way of moving the table caption to the top of the table. The default is
to have the caption not rotated and to the right of the table.
#LyX 1.3 created this file. For more info see http://www.lyx.org/
\lyxformat 221
If a table (within a table float) is rotated 90 degrees is there an easy
way of moving the table caption to the top of the table. The default is
to have the caption not rotated and to the right of the table.
#LyX 1.3 created this file. For more info see http://www.lyx.org/
\lyxformat 221
If a table (within a table float) is rotated 90 degrees is there an easy
way of moving the table caption to the top of the table. The default is
to have the caption not rotated and to the right of the table.
#LyX 1.3 created this file. For more info see http://www.lyx.org/
\lyxformat 221
Hello all,
Does anyone have experience with using csv2lyx with lyx-1.3.0. I have
been using csv2lyx with lyx-1.2 and have had no problems. If I try to
open a lyx file created with csv2lyx with Lyx-1.3 i get the following
error
An error occurred while running the conversion script
The following
Hello all,
Does anyone have experience with using csv2lyx with lyx-1.3.0. I have
been using csv2lyx with lyx-1.2 and have had no problems. If I try to
open a lyx file created with csv2lyx with Lyx-1.3 i get the following
error
An error occurred while running the conversion script
The following
Hello all,
Does anyone have experience with using csv2lyx with lyx-1.3.0. I have
been using csv2lyx with lyx-1.2 and have had no problems. If I try to
open a lyx file created with csv2lyx with Lyx-1.3 i get the following
error
"An error occurred while running the conversion script"
The following
Hi
is there any step-by-step guide to setting up and using preview-latex with lyx
1.3pre2/cvs?
If not would somebody post one for the benefit of all us ordinary lyxers?
thanks
Morgan
Hi
is there any step-by-step guide to setting up and using preview-latex with lyx
1.3pre2/cvs?
If not would somebody post one for the benefit of all us ordinary lyxers?
thanks
Morgan
Hi
is there any step-by-step guide to setting up and using preview-latex with lyx
1.3pre2/cvs?
If not would somebody post one for the benefit of all us ordinary lyxers?
thanks
Morgan
Hi
how do I input equations into the AMS align, alignat etc environments?
reLyX can import these fine from latex files but when I go to use the align
environment, all I get are two blue boxes corresponding to a single equation.
I can replicate these in new rows by CTRL-ENTER but I clearly need
M-m c i does the job fine.
many thanks
Morgan
On Tue 17 Dec 2002 12:23, you wrote:
On Tue, Dec 17, 2002 at 12:06:38PM +, Morgan Kelly wrote:
What do I do?
You could start with telling us the version of LyX you use.
M-m c i for 'math column insert' might help in a few cases
Hi
how do I input equations into the AMS align, alignat etc environments?
reLyX can import these fine from latex files but when I go to use the align
environment, all I get are two blue boxes corresponding to a single equation.
I can replicate these in new rows by CTRL-ENTER but I clearly need
M-m c i does the job fine.
many thanks
Morgan
On Tue 17 Dec 2002 12:23, you wrote:
On Tue, Dec 17, 2002 at 12:06:38PM +, Morgan Kelly wrote:
What do I do?
You could start with telling us the version of LyX you use.
M-m c i for 'math column insert' might help in a few cases
Hi
how do I input equations into the AMS align, alignat etc environments?
reLyX can import these fine from latex files but when I go to use the align
environment, all I get are two blue boxes corresponding to a single equation.
I can replicate these in new rows by CTRL-ENTER but I clearly need
M-m c i does the job fine.
many thanks
Morgan
On Tue 17 Dec 2002 12:23, you wrote:
> On Tue, Dec 17, 2002 at 12:06:38PM +, Morgan Kelly wrote:
> > What do I do?
>
> You could start with telling us the version of LyX you use.
>
> M-m c i for 'math column insert
Dear all,
I thought i might add a little to the ps eps thread that is running. I
have been including epsi figure in my lyx documents that were created
from postscript files by ps2epsi. This mostly seems to work fine.
However for some of my figures the bounding box calculated by ps2epsi
must be
Dear all,
I thought i might add a little to the ps eps thread that is running. I
have been including epsi figure in my lyx documents that were created
from postscript files by ps2epsi. This mostly seems to work fine.
However for some of my figures the bounding box calculated by ps2epsi
must be
Dear all,
I thought i might add a little to the ps > eps thread that is running. I
have been including epsi figure in my lyx documents that were created
from postscript files by ps2epsi. This mostly seems to work fine.
However for some of my figures the bounding box calculated by ps2epsi
must be
---BeginMessage---
Hello all,
I seem to have found a bug when trying to create a complex table that
includes multicolumns and math. If i try and make another cell into
multicoumn (r12,c7:c8) lyx seems to co into a loop. Yet is seem to be
able to make any other combination of cell
---BeginMessage---
Hello all,
I seem to have found a bug when trying to create a complex table that
includes multicolumns and math. If i try and make another cell into
multicoumn (r12,c7:c8) lyx seems to co into a loop. Yet is seem to be
able to make any other combination of cell
--- Begin Message ---
Hello all,
I seem to have found a bug when trying to create a complex table that
includes multicolumns and math. If i try and make another cell into
multicoumn (r12,c7:c8) lyx seems to co into a loop. Yet is seem to be
able to make any other combination of cell
Hello,
I tried to rebuild the source RPM on Redhat 7.3 as instructed.
(rpm --rebuild lyx-1.2.1-1.src.rpm)
However the rebuild did not work the following error message was
generated;
g++ -DHAVE_CONFIG_H -I. -I. -I../../../src -I../../../images
-I../../../src/ -I../../../src/frontends/
Shepard wrote:
On 27 Sep 2002, Matthew Kelly wrote:
xforms_helpers.h:17:26: forms.h: No such file or directory
Matty,
Do you have the xforms package installed? If not, grab that first.
Rich
Dr. Richard B. Shepard, President
Applied Ecosystem Services
Hello,
I tried to rebuild the source RPM on Redhat 7.3 as instructed.
(rpm --rebuild lyx-1.2.1-1.src.rpm)
However the rebuild did not work the following error message was
generated;
g++ -DHAVE_CONFIG_H -I. -I. -I../../../src -I../../../images
-I../../../src/ -I../../../src/frontends/
Shepard wrote:
On 27 Sep 2002, Matthew Kelly wrote:
xforms_helpers.h:17:26: forms.h: No such file or directory
Matty,
Do you have the xforms package installed? If not, grab that first.
Rich
Dr. Richard B. Shepard, President
Applied Ecosystem Services
Hello,
I tried to rebuild the source RPM on Redhat 7.3 as instructed.
(rpm --rebuild lyx-1.2.1-1.src.rpm)
However the rebuild did not work the following error message was
generated;
g++ -DHAVE_CONFIG_H -I. -I. -I../../../src -I../../../images
-I../../../src/ -I../../../src/frontends/
Shepard wrote:
> On 27 Sep 2002, Matthew Kelly wrote:
>
> > xforms_helpers.h:17:26: forms.h: No such file or directory
>
> Matty,
>
> Do you have the xforms package installed? If not, grab that first.
>
> Rich
>
> Dr. Richard B. Shepard, President
On Nov 03, 2001, Dekel Tsur wrote:
On Thu, Nov 01, 2001 at 08:17:54AM -0500, Ken Kelly wrote:
The speaker name and following dialogue (or parenthetical)
should not be separated by so much space:
[...]
Add the following lines to the layout file (I assume you use lyx 1.1.6fix3
On Nov 03, 2001, Dekel Tsur wrote:
On Thu, Nov 01, 2001 at 08:17:54AM -0500, Ken Kelly wrote:
The speaker name and following dialogue (or parenthetical)
should not be separated by so much space:
[...]
Add the following lines to the layout file (I assume you use lyx 1.1.6fix3
On Nov 03, 2001, Dekel Tsur wrote:
> On Thu, Nov 01, 2001 at 08:17:54AM -0500, Ken Kelly wrote:
>> The speaker name and following dialogue (or parenthetical)
>> should not be separated by so much space:
[...]
> Add the following lines to the layout file (I
Hi, I'm interested in using lyx for screenplays, but the
existing class (Hollywood) is not suitable. I deleted
some parts of the class that didn't work as expected (FADE
IN/FADE OUT and the title page). That left me with two
problems remaining...
The speaker
Hi, I'm interested in using lyx for screenplays, but the
existing class (Hollywood) is not suitable. I deleted
some parts of the class that didn't work as expected (FADE
IN/FADE OUT and the title page). That left me with two
problems remaining...
The speaker
Hi, I'm interested in using lyx for screenplays, but the
existing class (Hollywood) is not suitable. I deleted
some parts of the class that didn't work as expected (FADE
IN/FADE OUT and the title page). That left me with two
problems remaining...
The speaker
Hi,
Trying to install lyx 1.1.5 under SuSE 6.4 (with C++ installed) I am having
./configure fail with the message "Unable to find a working C++ compiler"
What changes do I need to make so that lyx can find crtbegin.o, cc1plus etc.
The relevant bit of config.log is below.
thanks,
Morgan
Hi,
Trying to install lyx 1.1.5 under SuSE 6.4 (with C++ installed) I am having
./configure fail with the message "Unable to find a working C++ compiler"
What changes do I need to make so that lyx can find crtbegin.o, cc1plus etc.
The relevant bit of config.log is below.
thanks,
Morgan
Hi,
Trying to install lyx 1.1.5 under SuSE 6.4 (with C++ installed) I am having
./configure fail with the message "Unable to find a working C++ compiler"
What changes do I need to make so that lyx can find crtbegin.o, cc1plus etc.
The relevant bit of config.log is below.
thanks,
Morgan
82 matches
Mail list logo