Re: I can´t run lyx 2.0
El 26/08/10 18:03, Marcelo Acuña escribió: Hello, I upgrade my computer to amd 64 bit processor, and re installed linux with amd64 version and installed last qt, 4.6.3. I compiled lyx 1.6.7 and it run without problem. But lyx 2.0 alpha 4 and alpha 5 not run. I get: lyx-2.0a5: error while loading shared libraries: libQtGui.so.4: cannot open shared object file: No such file or directory What I make bad? How I can correct the problem? Test installing qt4-devel in your machine. Regards Miguel The file: libQtGui.so.4, is present in my hard disc. I have not problem with lyx 1.6.7. I think that I have a PATH not defined, but I don´t know which path because 1.6.7 compile and 2.0 alpha 5 compile without problem. Marcelo What distro linux you have ?. I am test all alpha version and compile without problem. Also I test with lyx-devel and update with git svn without problem, in Mandriva distro. Miguel
Re: I can´t run lyx 2.0
El 26/08/10 18:03, Marcelo Acuña escribió: Hello, I upgrade my computer to amd 64 bit processor, and re installed linux with amd64 version and installed last qt, 4.6.3. I compiled lyx 1.6.7 and it run without problem. But lyx 2.0 alpha 4 and alpha 5 not run. I get: lyx-2.0a5: error while loading shared libraries: libQtGui.so.4: cannot open shared object file: No such file or directory What I make bad? How I can correct the problem? Test installing qt4-devel in your machine. Regards Miguel The file: libQtGui.so.4, is present in my hard disc. I have not problem with lyx 1.6.7. I think that I have a PATH not defined, but I don´t know which path because 1.6.7 compile and 2.0 alpha 5 compile without problem. Marcelo What distro linux you have ?. I am test all alpha version and compile without problem. Also I test with lyx-devel and update with git svn without problem, in Mandriva distro. Miguel
Re: I can´t run lyx 2.0
El 26/08/10 18:03, Marcelo Acuña escribió: Hello, I upgrade my computer to amd 64 bit processor, and re installed linux with amd64 version and installed last qt, 4.6.3. I compiled lyx 1.6.7 and it run without problem. But lyx 2.0 alpha 4 and alpha 5 not run. I get: lyx-2.0a5: error while loading shared libraries: libQtGui.so.4: cannot open shared object file: No such file or directory What I make bad? How I can correct the problem? Test installing qt4-devel in your machine. Regards Miguel The file: libQtGui.so.4, is present in my hard disc. I have not problem with lyx 1.6.7. I think that I have a PATH not defined, but I don´t know which path because 1.6.7 compile and 2.0 alpha 5 compile without problem. Marcelo What distro linux you have ?. I am test all alpha version and compile without problem. Also I test with lyx-devel and update with git svn without problem, in Mandriva distro. Miguel
Re: Check speller in LyX 2.0 alpha3
Hi I have Mandriva in my computer and I have installed aspell-es and libaspell-devel and work fine. Regards On 27/05/10 22:13, Francisco J. Ruiz-Ruano Campaña wrote: I have installed LyX 2.0 alpha3 in Ubuntu, but I check speller is deactivated since I have installed it. I have installed aspell, ispell and hunspell in spanish, but it doesn't work. Some ideas? Thanks.
Re: Save Date vs. Print Date
Under the title skip a row and write your date, and up to the left under file, edit ... where are the paragraphs of the document and press Date and that date is final. Regards On 28/05/10 00:30, Tim Wescott wrote: Under the 'Article' document type, the title page will list the print date of a document. But I vastly prefer to insert my own date, or to list the save date of the file -- it just makes more sense for tracking changes. Is there a way to get LyX to do this? I didn't see it in the menus.
Re: Check speller in LyX 2.0 alpha3
Hi I have Mandriva in my computer and I have installed aspell-es and libaspell-devel and work fine. Regards On 27/05/10 22:13, Francisco J. Ruiz-Ruano Campaña wrote: I have installed LyX 2.0 alpha3 in Ubuntu, but I check speller is deactivated since I have installed it. I have installed aspell, ispell and hunspell in spanish, but it doesn't work. Some ideas? Thanks.
Re: Save Date vs. Print Date
Under the title skip a row and write your date, and up to the left under file, edit ... where are the paragraphs of the document and press Date and that date is final. Regards On 28/05/10 00:30, Tim Wescott wrote: Under the 'Article' document type, the title page will list the print date of a document. But I vastly prefer to insert my own date, or to list the save date of the file -- it just makes more sense for tracking changes. Is there a way to get LyX to do this? I didn't see it in the menus.
Re: Check speller in LyX 2.0 alpha3
Hi I have Mandriva in my computer and I have installed aspell-es and libaspell-devel and work fine. Regards On 27/05/10 22:13, Francisco J. Ruiz-Ruano Campaña wrote: I have installed LyX 2.0 alpha3 in Ubuntu, but I check speller is deactivated since I have installed it. I have installed aspell, ispell and hunspell in spanish, but it doesn't work. Some ideas? Thanks.
Re: Save Date vs. Print Date
Under the title skip a row and write your date, and up to the left under file, edit ... where are the paragraphs of the document and press Date and that date is final. Regards On 28/05/10 00:30, Tim Wescott wrote: Under the 'Article' document type, the title page will list the print date of a document. But I vastly prefer to insert my own date, or to list the save date of the file -- it just makes more sense for tracking changes. Is there a way to get LyX to do this? I didn't see it in the menus.
Lyx-2.0.0 alpha3
Hi all : In the 2.0.0alpha2, don't work the thesaurus in spanish. In actual version work fine, in spanish and english language with MyThes-1.0 implemented by Jurgen and the files of Openthesaurus-es. The alpha2 version worked well without fail in my experience. Now the alpha3 version also work without problem. I have built the rpm to Mandriva 2010 for 2.0.0alpha3. With the object of others, can test that version. Where can I send the binary ? Thanks advanced Miguel Tech. Engineer
Lyx-2.0.0 alpha3
Hi all : In the 2.0.0alpha2, don't work the thesaurus in spanish. In actual version work fine, in spanish and english language with MyThes-1.0 implemented by Jurgen and the files of Openthesaurus-es. The alpha2 version worked well without fail in my experience. Now the alpha3 version also work without problem. I have built the rpm to Mandriva 2010 for 2.0.0alpha3. With the object of others, can test that version. Where can I send the binary ? Thanks advanced Miguel Tech. Engineer
Lyx-2.0.0 alpha3
Hi all : In the 2.0.0alpha2, don't work the thesaurus in spanish. In actual version work fine, in spanish and english language with MyThes-1.0 implemented by Jurgen and the files of Openthesaurus-es. The alpha2 version worked well without fail in my experience. Now the alpha3 version also work without problem. I have built the rpm to Mandriva 2010 for 2.0.0alpha3. With the object of others, can test that version. Where can I send the binary ? Thanks advanced Miguel Tech. Engineer
Endnotes chapter by chapter
Hi all : I have installed the modules endheads and endnotes, running on texlive2009, with lyx version 2.0.0alpha2, in Mandriva 2010. The function endnotes work without problem, with all notes in a new page to end document. How I can do the following ? : Chapter 1 Note 1 Note 2 ... Chapter 2 Note 1 Note 2 ... Thanks advanced
Re: Endnotes chapter by chapter
Hi Richard : No. He puts the notes to end of each chapter, but not on a separate page chapter to chapter. Example : In a new page : Chapter 1 Note 1 Note 2 Note 3 ... Chapter 2 Note 1 Note 2 Note 3 ... Thanks so much Miguel On 07/05/10 13:44, RIchard Heck wrote: I have installed the modules endheads and endnotes, running on texlive2009, with lyx version 2.0.0alpha2, in Mandriva 2010. The function endnotes work without problem, with all notes in a new page to end document. How I can do the following ? : Chapter 1 Note 1 Note 2 ... Chapter 2 Note 1 Note 2 ... If you put \theendnotes in ERT at the end of each chapter, does that do it? rh
Endnotes chapter by chapter
Hi all : I have installed the modules endheads and endnotes, running on texlive2009, with lyx version 2.0.0alpha2, in Mandriva 2010. The function endnotes work without problem, with all notes in a new page to end document. How I can do the following ? : Chapter 1 Note 1 Note 2 ... Chapter 2 Note 1 Note 2 ... Thanks advanced
Re: Endnotes chapter by chapter
Hi Richard : No. He puts the notes to end of each chapter, but not on a separate page chapter to chapter. Example : In a new page : Chapter 1 Note 1 Note 2 Note 3 ... Chapter 2 Note 1 Note 2 Note 3 ... Thanks so much Miguel On 07/05/10 13:44, RIchard Heck wrote: I have installed the modules endheads and endnotes, running on texlive2009, with lyx version 2.0.0alpha2, in Mandriva 2010. The function endnotes work without problem, with all notes in a new page to end document. How I can do the following ? : Chapter 1 Note 1 Note 2 ... Chapter 2 Note 1 Note 2 ... If you put \theendnotes in ERT at the end of each chapter, does that do it? rh
Endnotes chapter by chapter
Hi all : I have installed the modules endheads and endnotes, running on texlive2009, with lyx version 2.0.0alpha2, in Mandriva 2010. The function endnotes work without problem, with all notes in a new page to end document. How I can do the following ? : Chapter 1 Note 1 Note 2 ... Chapter 2 Note 1 Note 2 ... Thanks advanced
Re: Endnotes chapter by chapter
Hi Richard : No. He puts the notes to end of each chapter, but not on a separate page chapter to chapter. Example : In a new page : Chapter 1 Note 1 Note 2 Note 3 ... Chapter 2 Note 1 Note 2 Note 3 ... Thanks so much Miguel On 07/05/10 13:44, RIchard Heck wrote: I have installed the modules endheads and endnotes, running on texlive2009, with lyx version 2.0.0alpha2, in Mandriva 2010. The function endnotes work without problem, with all notes in a new page to end document. How I can do the following ? : Chapter 1 Note 1 Note 2 ... Chapter 2 Note 1 Note 2 ... If you put \theendnotes in ERT at the end of each chapter, does that do it? rh
Thesaurus in spanish lyx-2.0.0alpha1
Hi all : I have installed Spanish ( Spain ) Openoffice's thesauro; I have indicated the path in Preferences, admits me the thesauro with an icon, but it does not work. Can you help me ? Thanks advanced Miguel
Thesaurus in spanish lyx-2.0.0alpha1
Hi all : I have installed Spanish ( Spain ) Openoffice's thesauro; I have indicated the path in Preferences, admits me the thesauro with an icon, but it does not work. Can you help me ? Thanks advanced Miguel
Thesaurus in spanish lyx-2.0.0alpha1
Hi all : I have installed Spanish ( Spain ) Openoffice's thesauro; I have indicated the path in Preferences, admits me the thesauro with an icon, but it does not work. Can you help me ? Thanks advanced Miguel
Re: how to install LyX in Linux?
What distribution you have ? Miguel Helge Hafting escribió: m.kocin...@mini.pw.edu.pl wrote: It was rather surprise for me that installing LyX in Linux seems to be much more complecated than in Windows. In fact, I have no experience in Linux... If you _download_ LyX for linux from the lyx website, then you get source code that you can compile. Doing that is complicated indeed, and not recommended for a beginner. There are _many_ different linux distributions. Making a lyx installer for each is a lot of work, so it is not done by lyx developers. Instead, linux distribution developers put lyx in their distributions. So, the correct way to install lyx is to use your linux distribution's way of installing software. With debian, I use this command: $ apt-get install lyx That's all. I didn't even have to download anything. With this command, debian will download and install lyx and all other software that is needed to make lyx work. If you have ubuntu, the command is similiar. Other linux distributions are different, and you may have to download a package first. But you download the lyx package from your linux distributor, not from the lyx website. Why there is hard to find install. exe file for LyX at lyx.org? Is it true taht that words Major Linux distributions take care of LyX binaries themselves and you will find LyX in their repositories. mean when I buy a new notebok with Linux installed then there will also LyX there? If the notebook comes with a _major_ linux distribution installed, then it may or may not have LyX already. Installing LyX using the standard way of installing lyx on that linux distribution should be easy enough though. If you need help, ask here or in the linux distributors forum. Note that some notebooks comes with not so major linux distributions, which may not have lyx at all. In that case, consider switching to a better distribution. Helge Hafting
Re: how to install LyX in Linux?
What distribution you have ? Miguel Helge Hafting escribió: m.kocin...@mini.pw.edu.pl wrote: It was rather surprise for me that installing LyX in Linux seems to be much more complecated than in Windows. In fact, I have no experience in Linux... If you _download_ LyX for linux from the lyx website, then you get source code that you can compile. Doing that is complicated indeed, and not recommended for a beginner. There are _many_ different linux distributions. Making a lyx installer for each is a lot of work, so it is not done by lyx developers. Instead, linux distribution developers put lyx in their distributions. So, the correct way to install lyx is to use your linux distribution's way of installing software. With debian, I use this command: $ apt-get install lyx That's all. I didn't even have to download anything. With this command, debian will download and install lyx and all other software that is needed to make lyx work. If you have ubuntu, the command is similiar. Other linux distributions are different, and you may have to download a package first. But you download the lyx package from your linux distributor, not from the lyx website. Why there is hard to find install. exe file for LyX at lyx.org? Is it true taht that words Major Linux distributions take care of LyX binaries themselves and you will find LyX in their repositories. mean when I buy a new notebok with Linux installed then there will also LyX there? If the notebook comes with a _major_ linux distribution installed, then it may or may not have LyX already. Installing LyX using the standard way of installing lyx on that linux distribution should be easy enough though. If you need help, ask here or in the linux distributors forum. Note that some notebooks comes with not so major linux distributions, which may not have lyx at all. In that case, consider switching to a better distribution. Helge Hafting
Re: how to install LyX in Linux?
What distribution you have ? Miguel Helge Hafting escribió: m.kocin...@mini.pw.edu.pl wrote: It was rather surprise for me that installing LyX in Linux seems to be much more complecated than in Windows. In fact, I have no experience in Linux... If you _download_ LyX for linux from the lyx website, then you get source code that you can compile. Doing that is complicated indeed, and not recommended for a beginner. There are _many_ different linux distributions. Making a lyx installer for each is a lot of work, so it is not done by lyx developers. Instead, linux distribution developers put lyx in their distributions. So, the correct way to install lyx is to use your linux distribution's way of installing software. With debian, I use this command: $ apt-get install lyx That's all. I didn't even have to download anything. With this command, debian will download and install lyx and all other software that is needed to make lyx work. If you have ubuntu, the command is similiar. Other linux distributions are different, and you may have to download a package first. But you download the lyx package from your linux distributor, not from the lyx website. Why there is hard to find "install. exe" file for LyX at lyx.org? Is it true taht that words "Major Linux distributions take care of LyX binaries themselves and you will find LyX in their repositories." mean when I buy a new notebok with Linux installed then there will also LyX there? If the notebook comes with a _major_ linux distribution installed, then it may or may not have LyX already. Installing LyX using the standard way of installing lyx on that linux distribution should be easy enough though. If you need help, ask here or in the linux distributors forum. Note that some notebooks comes with not so "major" linux distributions, which may not have lyx at all. In that case, consider switching to a better distribution. Helge Hafting
Re: Vertical line in the side left
How can put the Text in the left corner down, in vertical position above the line ?. See example attached. Thanks advanced Yago escribió: You can put a vertical line 2pt width and a Text centered above the line at left on all pages of your document with this two commands into an ERT box at the beginning of the document: \AddToShipoutPicture{\psline[linewidth=2pt](2,3)(2,26.5)} \AddToShipoutPicture{\rput(2,27){\large Text}} You will need to put this in your preamble: \usepackage{pstricks,eso-pic,calc,graphicx} Of course you can to change the origin/final line/text co-ordinates depends on the margins on the document and your needs. - Original Message - From: icebna ice...@telefonica.net To: lyx-users@lists.lyx.org Sent: Wednesday, July 15, 2009 9:12 AM Subject: Vertical line in the side left Hi all : How put a vertical line, up to down in the left side, with a word above the line in the left corner down. Please, see the example adjunct. Thanks so much Miguel #LyX 1.6.3 created this file. For more info see http://www.lyx.org/ \lyxformat 345 \begin_document \begin_header \textclass article \begin_preamble % NO ALTERE ESTE PREAMBULO \lhead{Ejemplo \copyright} \usepackage{rotating} \usepackage{graphicx} \usepackage{fancyhdr} \end_preamble \use_default_options true \language spanish \inputencoding auto \font_roman default \font_sans default \font_typewriter default \font_default_family default \font_sc false \font_osf false \font_sf_scale 100 \font_tt_scale 100 \graphics default \paperfontsize default \spacing single \use_hyperref false \papersize default \use_geometry false \use_amsmath 1 \use_esint 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle fancy \tracking_changes false \output_changes false \author \end_header \begin_body \begin_layout Standard How make put the line in vertical position, up to down, in the side left, and with the word Example, in the left corner down, above the line. \end_layout \end_body \end_document #LyX 1.6.3 created this file. For more info see http://www.lyx.org/ \lyxformat 345 \begin_document \begin_header \textclass article \begin_preamble % NO ALTERE ESTE PREAMBULO \usepackage{rotating} \usepackage{graphicx} \usepackage{fancyhdr} \end_preamble \use_default_options true \language spanish \inputencoding auto \font_roman default \font_sans default \font_typewriter default \font_default_family default \font_sc false \font_osf false \font_sf_scale 100 \font_tt_scale 100 \graphics default \paperfontsize default \spacing single \use_hyperref false \papersize default \use_geometry false \use_amsmath 1 \use_esint 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle default \tracking_changes false \output_changes false \author \author \end_header \begin_body \begin_layout Standard \begin_inset ERT status open \begin_layout Plain Layout \backslash reversemarginpar \end_layout \end_inset \begin_inset Marginal status open \begin_layout Plain Layout \noindent \align center \begin_inset ERT status open \begin_layout Plain Layout \backslash rotatebox[origin=l]{90}{ \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout This is a centered paragraph. Left or right changes the space between the line and the text \bar under \end_layout \end_inset \bar under Ejemplo \begin_inset space ~ \end_inset © \begin_inset space \hspace*{} \length 18cm \end_inset \bar default \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard How make put the line in vertical position, up to down, in the side left, and with the word Example, in the left corner down, above the line. \end_layout \end_body \end_document
Re: Vertical line in the side left
OK Yago Thanks so much Miguel Yago escribió: See the attached files. - Original Message - From: icebna ice...@telefonica.net To: lyx-users@lists.lyx.org; diazd...@ono.com Sent: Thursday, July 16, 2009 8:48 AM Subject: Re: Vertical line in the side left How can put the Text in the left corner down, in vertical position above the line ?. See example attached. Thanks advanced Yago escribió: You can put a vertical line 2pt width and a Text centered above the line at left on all pages of your document with this two commands into an ERT box at the beginning of the document: \AddToShipoutPicture{\psline[linewidth=2pt](2,3)(2,26.5)} \AddToShipoutPicture{\rput(2,27){\large Text}} You will need to put this in your preamble: \usepackage{pstricks,eso-pic,calc,graphicx} Of course you can to change the origin/final line/text co-ordinates depends on the margins on the document and your needs. - Original Message - From: icebna ice...@telefonica.net To: lyx-users@lists.lyx.org Sent: Wednesday, July 15, 2009 9:12 AM Subject: Vertical line in the side left Hi all : How put a vertical line, up to down in the left side, with a word above the line in the left corner down. Please, see the example adjunct. Thanks so much Miguel #LyX 1.6.3 created this file. For more info see http://www.lyx.org/ \lyxformat 345 \begin_document \begin_header \textclass article \begin_preamble % NO ALTERE ESTE PREAMBULO \lhead{Ejemplo \copyright} \usepackage{rotating} \usepackage{graphicx} \usepackage{fancyhdr} \end_preamble \use_default_options true \language spanish \inputencoding auto \font_roman default \font_sans default \font_typewriter default \font_default_family default \font_sc false \font_osf false \font_sf_scale 100 \font_tt_scale 100 \graphics default \paperfontsize default \spacing single \use_hyperref false \papersize default \use_geometry false \use_amsmath 1 \use_esint 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle fancy \tracking_changes false \output_changes false \author \end_header \begin_body \begin_layout Standard How make put the line in vertical position, up to down, in the side left, and with the word Example, in the left corner down, above the line. \end_layout \end_body \end_document #LyX 1.6.3 created this file. For more info see http://www.lyx.org/ \lyxformat 345 \begin_document \begin_header \textclass article \begin_preamble % NO ALTERE ESTE PREAMBULO \usepackage{rotating} \usepackage{graphicx} \usepackage{fancyhdr} \end_preamble \use_default_options true \language spanish \inputencoding auto \font_roman default \font_sans default \font_typewriter default \font_default_family default \font_sc false \font_osf false \font_sf_scale 100 \font_tt_scale 100 \graphics default \paperfontsize default \spacing single \use_hyperref false \papersize default \use_geometry false \use_amsmath 1 \use_esint 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle default \tracking_changes false \output_changes false \author \author \end_header \begin_body \begin_layout Standard \begin_inset ERT status open \begin_layout Plain Layout \backslash reversemarginpar \end_layout \end_inset \begin_inset Marginal status open \begin_layout Plain Layout \noindent \align center \begin_inset ERT status open \begin_layout Plain Layout \backslash rotatebox[origin=l]{90}{ \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout This is a centered paragraph. Left or right changes the space between the line and the text \bar under \end_layout \end_inset \bar under Ejemplo \begin_inset space ~ \end_inset © \begin_inset space \hspace*{} \length 18cm \end_inset \bar default \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard How make put the line in vertical position, up to down, in the side left, and with the word Example, in the left corner down, above the line. \end_layout \end_body \end_document
Re: Vertical line in the side left
How can put the Text in the left corner down, in vertical position above the line ?. See example attached. Thanks advanced Yago escribió: You can put a vertical line 2pt width and a Text centered above the line at left on all pages of your document with this two commands into an ERT box at the beginning of the document: \AddToShipoutPicture{\psline[linewidth=2pt](2,3)(2,26.5)} \AddToShipoutPicture{\rput(2,27){\large Text}} You will need to put this in your preamble: \usepackage{pstricks,eso-pic,calc,graphicx} Of course you can to change the origin/final line/text co-ordinates depends on the margins on the document and your needs. - Original Message - From: icebna ice...@telefonica.net To: lyx-users@lists.lyx.org Sent: Wednesday, July 15, 2009 9:12 AM Subject: Vertical line in the side left Hi all : How put a vertical line, up to down in the left side, with a word above the line in the left corner down. Please, see the example adjunct. Thanks so much Miguel #LyX 1.6.3 created this file. For more info see http://www.lyx.org/ \lyxformat 345 \begin_document \begin_header \textclass article \begin_preamble % NO ALTERE ESTE PREAMBULO \lhead{Ejemplo \copyright} \usepackage{rotating} \usepackage{graphicx} \usepackage{fancyhdr} \end_preamble \use_default_options true \language spanish \inputencoding auto \font_roman default \font_sans default \font_typewriter default \font_default_family default \font_sc false \font_osf false \font_sf_scale 100 \font_tt_scale 100 \graphics default \paperfontsize default \spacing single \use_hyperref false \papersize default \use_geometry false \use_amsmath 1 \use_esint 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle fancy \tracking_changes false \output_changes false \author \end_header \begin_body \begin_layout Standard How make put the line in vertical position, up to down, in the side left, and with the word Example, in the left corner down, above the line. \end_layout \end_body \end_document #LyX 1.6.3 created this file. For more info see http://www.lyx.org/ \lyxformat 345 \begin_document \begin_header \textclass article \begin_preamble % NO ALTERE ESTE PREAMBULO \usepackage{rotating} \usepackage{graphicx} \usepackage{fancyhdr} \end_preamble \use_default_options true \language spanish \inputencoding auto \font_roman default \font_sans default \font_typewriter default \font_default_family default \font_sc false \font_osf false \font_sf_scale 100 \font_tt_scale 100 \graphics default \paperfontsize default \spacing single \use_hyperref false \papersize default \use_geometry false \use_amsmath 1 \use_esint 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle default \tracking_changes false \output_changes false \author \author \end_header \begin_body \begin_layout Standard \begin_inset ERT status open \begin_layout Plain Layout \backslash reversemarginpar \end_layout \end_inset \begin_inset Marginal status open \begin_layout Plain Layout \noindent \align center \begin_inset ERT status open \begin_layout Plain Layout \backslash rotatebox[origin=l]{90}{ \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout This is a centered paragraph. Left or right changes the space between the line and the text \bar under \end_layout \end_inset \bar under Ejemplo \begin_inset space ~ \end_inset © \begin_inset space \hspace*{} \length 18cm \end_inset \bar default \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard How make put the line in vertical position, up to down, in the side left, and with the word Example, in the left corner down, above the line. \end_layout \end_body \end_document
Re: Vertical line in the side left
OK Yago Thanks so much Miguel Yago escribió: See the attached files. - Original Message - From: icebna ice...@telefonica.net To: lyx-users@lists.lyx.org; diazd...@ono.com Sent: Thursday, July 16, 2009 8:48 AM Subject: Re: Vertical line in the side left How can put the Text in the left corner down, in vertical position above the line ?. See example attached. Thanks advanced Yago escribió: You can put a vertical line 2pt width and a Text centered above the line at left on all pages of your document with this two commands into an ERT box at the beginning of the document: \AddToShipoutPicture{\psline[linewidth=2pt](2,3)(2,26.5)} \AddToShipoutPicture{\rput(2,27){\large Text}} You will need to put this in your preamble: \usepackage{pstricks,eso-pic,calc,graphicx} Of course you can to change the origin/final line/text co-ordinates depends on the margins on the document and your needs. - Original Message - From: icebna ice...@telefonica.net To: lyx-users@lists.lyx.org Sent: Wednesday, July 15, 2009 9:12 AM Subject: Vertical line in the side left Hi all : How put a vertical line, up to down in the left side, with a word above the line in the left corner down. Please, see the example adjunct. Thanks so much Miguel #LyX 1.6.3 created this file. For more info see http://www.lyx.org/ \lyxformat 345 \begin_document \begin_header \textclass article \begin_preamble % NO ALTERE ESTE PREAMBULO \lhead{Ejemplo \copyright} \usepackage{rotating} \usepackage{graphicx} \usepackage{fancyhdr} \end_preamble \use_default_options true \language spanish \inputencoding auto \font_roman default \font_sans default \font_typewriter default \font_default_family default \font_sc false \font_osf false \font_sf_scale 100 \font_tt_scale 100 \graphics default \paperfontsize default \spacing single \use_hyperref false \papersize default \use_geometry false \use_amsmath 1 \use_esint 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle fancy \tracking_changes false \output_changes false \author \end_header \begin_body \begin_layout Standard How make put the line in vertical position, up to down, in the side left, and with the word Example, in the left corner down, above the line. \end_layout \end_body \end_document #LyX 1.6.3 created this file. For more info see http://www.lyx.org/ \lyxformat 345 \begin_document \begin_header \textclass article \begin_preamble % NO ALTERE ESTE PREAMBULO \usepackage{rotating} \usepackage{graphicx} \usepackage{fancyhdr} \end_preamble \use_default_options true \language spanish \inputencoding auto \font_roman default \font_sans default \font_typewriter default \font_default_family default \font_sc false \font_osf false \font_sf_scale 100 \font_tt_scale 100 \graphics default \paperfontsize default \spacing single \use_hyperref false \papersize default \use_geometry false \use_amsmath 1 \use_esint 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle default \tracking_changes false \output_changes false \author \author \end_header \begin_body \begin_layout Standard \begin_inset ERT status open \begin_layout Plain Layout \backslash reversemarginpar \end_layout \end_inset \begin_inset Marginal status open \begin_layout Plain Layout \noindent \align center \begin_inset ERT status open \begin_layout Plain Layout \backslash rotatebox[origin=l]{90}{ \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout This is a centered paragraph. Left or right changes the space between the line and the text \bar under \end_layout \end_inset \bar under Ejemplo \begin_inset space ~ \end_inset © \begin_inset space \hspace*{} \length 18cm \end_inset \bar default \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard How make put the line in vertical position, up to down, in the side left, and with the word Example, in the left corner down, above the line. \end_layout \end_body \end_document
Re: Vertical line in the side left
How can put the "Text" in the left corner down, in vertical position above the line ?. See example attached. Thanks advanced Yago escribió: You can put a vertical line 2pt width and a "Text" centered above the line at left on all pages of your document with this two commands into an ERT box at the beginning of the document: \AddToShipoutPicture{\psline[linewidth=2pt](2,3)(2,26.5)} \AddToShipoutPicture{\rput(2,27){\large Text}} You will need to put this in your preamble: \usepackage{pstricks,eso-pic,calc,graphicx} Of course you can to change the origin/final line/text co-ordinates depends on the margins on the document and your needs. - Original Message - From: "icebna" <ice...@telefonica.net> To: <lyx-users@lists.lyx.org> Sent: Wednesday, July 15, 2009 9:12 AM Subject: Vertical line in the side left Hi all : How put a vertical line, up to down in the left side, with a word above the line in the left corner down. Please, see the example adjunct. Thanks so much Miguel #LyX 1.6.3 created this file. For more info see http://www.lyx.org/ \lyxformat 345 \begin_document \begin_header \textclass article \begin_preamble % NO ALTERE ESTE PREAMBULO \lhead{Ejemplo \copyright} \usepackage{rotating} \usepackage{graphicx} \usepackage{fancyhdr} \end_preamble \use_default_options true \language spanish \inputencoding auto \font_roman default \font_sans default \font_typewriter default \font_default_family default \font_sc false \font_osf false \font_sf_scale 100 \font_tt_scale 100 \graphics default \paperfontsize default \spacing single \use_hyperref false \papersize default \use_geometry false \use_amsmath 1 \use_esint 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle fancy \tracking_changes false \output_changes false \author "" \end_header \begin_body \begin_layout Standard How make put the line in vertical position, up to down, in the side left, and with the word Example, in the left corner down, above the line. \end_layout \end_body \end_document #LyX 1.6.3 created this file. For more info see http://www.lyx.org/ \lyxformat 345 \begin_document \begin_header \textclass article \begin_preamble % NO ALTERE ESTE PREAMBULO \usepackage{rotating} \usepackage{graphicx} \usepackage{fancyhdr} \end_preamble \use_default_options true \language spanish \inputencoding auto \font_roman default \font_sans default \font_typewriter default \font_default_family default \font_sc false \font_osf false \font_sf_scale 100 \font_tt_scale 100 \graphics default \paperfontsize default \spacing single \use_hyperref false \papersize default \use_geometry false \use_amsmath 1 \use_esint 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle default \tracking_changes false \output_changes false \author "" \author "" \end_header \begin_body \begin_layout Standard \begin_inset ERT status open \begin_layout Plain Layout \backslash reversemarginpar \end_layout \end_inset \begin_inset Marginal status open \begin_layout Plain Layout \noindent \align center \begin_inset ERT status open \begin_layout Plain Layout \backslash rotatebox[origin=l]{90}{ \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout This is a centered paragraph. Left or right changes the space between the line and the text \bar under \end_layout \end_inset \bar under Ejemplo \begin_inset space ~ \end_inset © \begin_inset space \hspace*{} \length 18cm \end_inset \bar default \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard How make put the line in vertical position, up to down, in the side left, and with the word Example, in the left corner down, above the line. \end_layout \end_body \end_document
Re: Vertical line in the side left
OK Yago Thanks so much Miguel Yago escribió: See the attached files. - Original Message - From: "icebna" <ice...@telefonica.net> To: <lyx-users@lists.lyx.org>; <diazd...@ono.com> Sent: Thursday, July 16, 2009 8:48 AM Subject: Re: Vertical line in the side left How can put the "Text" in the left corner down, in vertical position above the line ?. See example attached. Thanks advanced Yago escribió: You can put a vertical line 2pt width and a "Text" centered above the line at left on all pages of your document with this two commands into an ERT box at the beginning of the document: \AddToShipoutPicture{\psline[linewidth=2pt](2,3)(2,26.5)} \AddToShipoutPicture{\rput(2,27){\large Text}} You will need to put this in your preamble: \usepackage{pstricks,eso-pic,calc,graphicx} Of course you can to change the origin/final line/text co-ordinates depends on the margins on the document and your needs. - Original Message - From: "icebna" <ice...@telefonica.net> To: <lyx-users@lists.lyx.org> Sent: Wednesday, July 15, 2009 9:12 AM Subject: Vertical line in the side left Hi all : How put a vertical line, up to down in the left side, with a word above the line in the left corner down. Please, see the example adjunct. Thanks so much Miguel #LyX 1.6.3 created this file. For more info see http://www.lyx.org/ \lyxformat 345 \begin_document \begin_header \textclass article \begin_preamble % NO ALTERE ESTE PREAMBULO \lhead{Ejemplo \copyright} \usepackage{rotating} \usepackage{graphicx} \usepackage{fancyhdr} \end_preamble \use_default_options true \language spanish \inputencoding auto \font_roman default \font_sans default \font_typewriter default \font_default_family default \font_sc false \font_osf false \font_sf_scale 100 \font_tt_scale 100 \graphics default \paperfontsize default \spacing single \use_hyperref false \papersize default \use_geometry false \use_amsmath 1 \use_esint 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle fancy \tracking_changes false \output_changes false \author "" \end_header \begin_body \begin_layout Standard How make put the line in vertical position, up to down, in the side left, and with the word Example, in the left corner down, above the line. \end_layout \end_body \end_document #LyX 1.6.3 created this file. For more info see http://www.lyx.org/ \lyxformat 345 \begin_document \begin_header \textclass article \begin_preamble % NO ALTERE ESTE PREAMBULO \usepackage{rotating} \usepackage{graphicx} \usepackage{fancyhdr} \end_preamble \use_default_options true \language spanish \inputencoding auto \font_roman default \font_sans default \font_typewriter default \font_default_family default \font_sc false \font_osf false \font_sf_scale 100 \font_tt_scale 100 \graphics default \paperfontsize default \spacing single \use_hyperref false \papersize default \use_geometry false \use_amsmath 1 \use_esint 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle default \tracking_changes false \output_changes false \author "" \author "" \end_header \begin_body \begin_layout Standard \begin_inset ERT status open \begin_layout Plain Layout \backslash reversemarginpar \end_layout \end_inset \begin_inset Marginal status open \begin_layout Plain Layout \noindent \align center \begin_inset ERT status open \begin_layout Plain Layout \backslash rotatebox[origin=l]{90}{ \end_layout \end_inset \begin_inset Note Note status collapsed \begin_layout Plain Layout This is a centered paragraph. Left or right changes the space between the line and the text \bar under \end_layout \end_inset \bar under Ejemplo \begin_inset space ~ \end_inset © \begin_inset space \hspace*{} \length 18cm \end_inset \bar default \begin_inset ERT status collapsed \begin_layout Plain Layout } \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard How make put the line in vertical position, up to down, in the side left, and with the word Example, in the left corner down, above the line. \end_layout \end_body \end_document
Vertical line in the side left
Hi all : How put a vertical line, up to down in the left side, with a word above the line in the left corner down. Please, see the example adjunct. Thanks so much Miguel #LyX 1.6.3 created this file. For more info see http://www.lyx.org/ \lyxformat 345 \begin_document \begin_header \textclass article \begin_preamble % NO ALTERE ESTE PREAMBULO \lhead{Ejemplo \copyright} \usepackage{rotating} \usepackage{graphicx} \usepackage{fancyhdr} \end_preamble \use_default_options true \language spanish \inputencoding auto \font_roman default \font_sans default \font_typewriter default \font_default_family default \font_sc false \font_osf false \font_sf_scale 100 \font_tt_scale 100 \graphics default \paperfontsize default \spacing single \use_hyperref false \papersize default \use_geometry false \use_amsmath 1 \use_esint 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle fancy \tracking_changes false \output_changes false \author \end_header \begin_body \begin_layout Standard How make put the line in vertical position, up to down, in the side left, and with the word Example, in the left corner down, above the line. \end_layout \end_body \end_document
Re: Vertical line in the side left
With command \rule a vertical line is generated, but I need that in the down left of the line, a text appears, also in vertically above the line, as in the example, but in vertically. Thanks advanced Helge Hafting escribió: icebna wrote: Hi all : How put a vertical line, up to down in the left side, with a word above the line in the left corner down. Please, see the example adjunct. Thanks so much Miguel Use a marginal note. In the marginal note, type Example On the next line in the marginal note, make the horizontal line. A line can be made in a number of ways: * A deep table column, with a frame line on one side only. (the line will be narrow) * A box with colored background, narrow width and great height. For some reason, setting the height for a colored box doesn't work. So put a minipage inside, and set the minipage height to 95% of textheight or so. (The line have adjustable thickness above some minimum. It will be red - no choice there it seems.) * Use ERT, for example \rule{0.5cm}{15cm} This is the most flexible way, I think. No limits on line dimensions. If you want a colored line, select the whole ERT box and use Edit-Text Style and set the color. Helge Hafting
Vertical line in the side left
Hi all : How put a vertical line, up to down in the left side, with a word above the line in the left corner down. Please, see the example adjunct. Thanks so much Miguel #LyX 1.6.3 created this file. For more info see http://www.lyx.org/ \lyxformat 345 \begin_document \begin_header \textclass article \begin_preamble % NO ALTERE ESTE PREAMBULO \lhead{Ejemplo \copyright} \usepackage{rotating} \usepackage{graphicx} \usepackage{fancyhdr} \end_preamble \use_default_options true \language spanish \inputencoding auto \font_roman default \font_sans default \font_typewriter default \font_default_family default \font_sc false \font_osf false \font_sf_scale 100 \font_tt_scale 100 \graphics default \paperfontsize default \spacing single \use_hyperref false \papersize default \use_geometry false \use_amsmath 1 \use_esint 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle fancy \tracking_changes false \output_changes false \author \end_header \begin_body \begin_layout Standard How make put the line in vertical position, up to down, in the side left, and with the word Example, in the left corner down, above the line. \end_layout \end_body \end_document
Re: Vertical line in the side left
With command \rule a vertical line is generated, but I need that in the down left of the line, a text appears, also in vertically above the line, as in the example, but in vertically. Thanks advanced Helge Hafting escribió: icebna wrote: Hi all : How put a vertical line, up to down in the left side, with a word above the line in the left corner down. Please, see the example adjunct. Thanks so much Miguel Use a marginal note. In the marginal note, type Example On the next line in the marginal note, make the horizontal line. A line can be made in a number of ways: * A deep table column, with a frame line on one side only. (the line will be narrow) * A box with colored background, narrow width and great height. For some reason, setting the height for a colored box doesn't work. So put a minipage inside, and set the minipage height to 95% of textheight or so. (The line have adjustable thickness above some minimum. It will be red - no choice there it seems.) * Use ERT, for example \rule{0.5cm}{15cm} This is the most flexible way, I think. No limits on line dimensions. If you want a colored line, select the whole ERT box and use Edit-Text Style and set the color. Helge Hafting
Vertical line in the side left
Hi all : How put a vertical line, up to down in the left side, with a word above the line in the left corner down. Please, see the example adjunct. Thanks so much Miguel #LyX 1.6.3 created this file. For more info see http://www.lyx.org/ \lyxformat 345 \begin_document \begin_header \textclass article \begin_preamble % NO ALTERE ESTE PREAMBULO \lhead{Ejemplo \copyright} \usepackage{rotating} \usepackage{graphicx} \usepackage{fancyhdr} \end_preamble \use_default_options true \language spanish \inputencoding auto \font_roman default \font_sans default \font_typewriter default \font_default_family default \font_sc false \font_osf false \font_sf_scale 100 \font_tt_scale 100 \graphics default \paperfontsize default \spacing single \use_hyperref false \papersize default \use_geometry false \use_amsmath 1 \use_esint 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle fancy \tracking_changes false \output_changes false \author "" \end_header \begin_body \begin_layout Standard How make put the line in vertical position, up to down, in the side left, and with the word Example, in the left corner down, above the line. \end_layout \end_body \end_document
Re: Vertical line in the side left
With command \rule a vertical line is generated, but I need that in the down left of the line, a text appears, also in vertically above the line, as in the example, but in vertically. Thanks advanced Helge Hafting escribió: icebna wrote: Hi all : How put a vertical line, up to down in the left side, with a word above the line in the left corner down. Please, see the example adjunct. Thanks so much Miguel Use a marginal note. In the marginal note, type "Example" On the next line in the marginal note, make the horizontal line. A line can be made in a number of ways: * A deep table column, with a frame line on one side only. (the line will be narrow) * A box with colored background, narrow width and great height. For some reason, setting the height for a colored box doesn't work. So put a minipage inside, and set the minipage height to 95% of textheight or so. (The line have adjustable thickness above some minimum. It will be red - no choice there it seems.) * Use ERT, for example \rule{0.5cm}{15cm} This is the most flexible way, I think. No limits on line dimensions. If you want a colored line, select the whole ERT box and use "Edit->Text Style" and set the color. Helge Hafting
Graphic in preamble
Hi all : I have in preamble the next code : \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{/home/miguel/ant.eps}} \rhead{\smallskip\usebox{\mylogo}} \rhead{Et lux in tenebris lucet \usebox{\mylogo}} the output to the printer, no print the graphic ant.eps, because say : don't find the graphic, and the graphic is there !! Someone idea ? Thanks advanced Miguel
Graphic in preamble
Hi all : I have in preamble the next code : \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{/home/miguel/ant.eps}} \rhead{\smallskip\usebox{\mylogo}} \rhead{Et lux in tenebris lucet \usebox{\mylogo}} the output to the printer, no print the graphic ant.eps, because say : don't find the graphic, and the graphic is there !! Someone idea ? Thanks advanced Miguel
Graphic in preamble
Hi all : I have in preamble the next code : \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{/home/miguel/ant.eps}} \rhead{\smallskip\usebox{\mylogo}} \rhead{Et lux in tenebris lucet \usebox{\mylogo}} the output to the printer, no print the graphic ant.eps, because say : don't find the graphic, and the graphic is there !! Someone idea ? Thanks advanced Miguel
graphic in preamble
Hi all : In the preamble I include the path a small graphic, which appears like logo in all the pages, in format eps. When I have printed everything goes out well but the graph is not recognized. The problem this one in the package tetex-dvips, that in previous versions was working perfectly, but now I cannot stamp print this logo. Some solution? Thanks advanced Miguel
graphic in preamble
Hi all : In the preamble I include the path a small graphic, which appears like logo in all the pages, in format eps. When I have printed everything goes out well but the graph is not recognized. The problem this one in the package tetex-dvips, that in previous versions was working perfectly, but now I cannot stamp print this logo. Some solution? Thanks advanced Miguel
graphic in preamble
Hi all : In the preamble I include the path a small graphic, which appears like logo in all the pages, in format eps. When I have printed everything goes out well but the graph is not recognized. The problem this one in the package tetex-dvips, that in previous versions was working perfectly, but now I cannot stamp print this logo. Some solution? Thanks advanced Miguel
Braille package
Hi all I have installed the file braille.sty, and when is activated in lyx, give me error : Missing \begin{document} and don't work. The braille.sty file has been installed in /usr/share/texmf/tex/latex/contrib/braille.sty Someone idea ? Miguel smime.p7s Description: S/MIME Cryptographic Signature
Braille package
Hi all I have installed the file braille.sty, and when is activated in lyx, give me error : Missing \begin{document} and don't work. The braille.sty file has been installed in /usr/share/texmf/tex/latex/contrib/braille.sty Someone idea ? Miguel smime.p7s Description: S/MIME Cryptographic Signature
Braille package
Hi all I have installed the file braille.sty, and when is activated in lyx, give me error : Missing \begin{document} and don't work. The braille.sty file has been installed in /usr/share/texmf/tex/latex/contrib/braille.sty Someone idea ? Miguel smime.p7s Description: S/MIME Cryptographic Signature
Package Braille
Hi all : I have download de file braille.sty, to type in Braille. Someone can say me where I must copy this file in Lyx o Latex directory ? My system is Linux Mandriva Thanks advanced Miguel smime.p7s Description: S/MIME Cryptographic Signature
Package Braille
Hi all : I have download de file braille.sty, to type in Braille. Someone can say me where I must copy this file in Lyx o Latex directory ? My system is Linux Mandriva Thanks advanced Miguel smime.p7s Description: S/MIME Cryptographic Signature
Package Braille
Hi all : I have download de file braille.sty, to type in Braille. Someone can say me where I must copy this file in Lyx o Latex directory ? My system is Linux Mandriva Thanks advanced Miguel smime.p7s Description: S/MIME Cryptographic Signature
English language in this site
Hi In this forum the language is the english, and I don't know a forum in spanish language. Regards Miguel from Spain smime.p7s Description: S/MIME Cryptographic Signature
English language in this site
Hi In this forum the language is the english, and I don't know a forum in spanish language. Regards Miguel from Spain smime.p7s Description: S/MIME Cryptographic Signature
English language in this site
Hi In this forum the language is the english, and I don't know a forum in spanish language. Regards Miguel from Spain smime.p7s Description: S/MIME Cryptographic Signature
Dropping package
Hi all : I need the dropping package to capital letters. ¿ How can install it in lyx-1.5.1 ? Thanks advanced Miguel smime.p7s Description: S/MIME Cryptographic Signature
Dropping package
Hi all : I need the dropping package to capital letters. ¿ How can install it in lyx-1.5.1 ? Thanks advanced Miguel smime.p7s Description: S/MIME Cryptographic Signature
Dropping package
Hi all : I need the dropping package to capital letters. ¿ How can install it in lyx-1.5.1 ? Thanks advanced Miguel smime.p7s Description: S/MIME Cryptographic Signature
Re: logo in headline
In the preamble of document write the next command : \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{/home/miguel/ant.eps}} \rhead{\smallskip\usebox{\mylogo}} \rhead{\usebox{\mylogo}} Previously make the logo in .eps format and put it in any directory. In my example is /home/miguel as can view, and my logo is ant.eps I hope that work fine Regards Miguel Leo Gürtler escribió: Dear lyx-list, ist there a possibility to insert a small graphic (logo) on the head of each page (I use koma-script). thanks. best wishes leo smime.p7s Description: S/MIME Cryptographic Signature
Re: logo in headline
See in the line 5, the example : \usepackage{scrpage2} \pagestyle{scrheadings} \usepackage{graphics} \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{testlogo.eps}} Here you must put the path to testlogo.eps, for example in Linux {/home/miguel/testlogo.eps}} or Windows {C:\testlogo.eps}} if you testlogo.eps are in the C:\ directory \rhead{\smallskip\usebox{\mylogo}} \rhead{\usebox{\mylogo}} ### Leo Gürtler escribió: icebna schrieb: Dear Miguel, yes you're right but this does not make a difference, if I put all the stuff in the latex preambel, see below for the error messages: it seems that a } is wrong, but I don't get it. best, leo that's all what's in the preambel + some dummy text in the document (docuclass: komascript article or book): ### \usepackage{scrpage2} \pagestyle{scrheadings} \usepackage{graphics} \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{testlogo.eps}} \rhead{\smallskip\usebox{\mylogo}} \rhead{\usebox{\mylogo}} ### the following errors appear: Argument of [EMAIL PROTECTED] has an extra }: ...\includegraphics[width=1cm]{testlogo.eps}} I've run across a `}' that doesn't seem to match anything. For example, `\def\a#1{...}' and `\a}' would produce this error. If you simply proceed now, the `\par' that I've just inserted will cause me to report a runaway argument that might be the root of the problem. But if your `}' was spurious, just type `2' and it will go away. Paragraph ended before [EMAIL PROTECTED] was complete.: ...\includegraphics[width=1cm]{testlogo.eps}} I suspect you've forgotten a `}', causing me to apply this control sequence to too much text. How can we recover? My plan is to forget the whole thing and hope for the best. Undefined control sequence: \rhead {\smallskip\usebox{\mylogo}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Error: Missing \begin{document}: \rhead{\smallskip\usebox{\mylogo} } You're in trouble here. Try typing return to proceed. If that doesn't work, type X return to quit. Undefined control sequence: \rhead {\usebox{\mylogo}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Hello Leo : Don't is in the ERT box, is in the menu Document → Configuration → Preamble LaTex where you must copy the piece code that I send you. Regards Miguel Leo Gürtler escribió: icebna schrieb: Dear Miguel, thanks a lot - but I got error messages. If it is ok I added my lyx file tot his mail, maybe you can help me or send me a small example (lyx file) from you (which works for you). thank your very much, best regards leo In the preamble of document write the next command : \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{/home/miguel/ant.eps}} \rhead{\smallskip\usebox{\mylogo}} \rhead{\usebox{\mylogo}} Previously make the logo in .eps format and put it in any directory. In my example is /home/miguel as can view, and my logo is ant.eps I hope that work fine Regards Miguel Leo Gürtler escribió: Dear lyx-list, ist there a possibility to insert a small graphic (logo) on the head of each page (I use koma-script). thanks. best wishes leo smime.p7s Description: S/MIME Cryptographic Signature
Re: logo in headline
Hello Leo : Don't is in the ERT box, is in the menu Document → Configuration → Preamble LaTex where you must copy the piece code that I send you. Regards Miguel Leo Gürtler escribió: icebna schrieb: Dear Miguel, thanks a lot - but I got error messages. If it is ok I added my lyx file tot his mail, maybe you can help me or send me a small example (lyx file) from you (which works for you). thank your very much, best regards leo In the preamble of document write the next command : \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{/home/miguel/ant.eps}} \rhead{\smallskip\usebox{\mylogo}} \rhead{\usebox{\mylogo}} Previously make the logo in .eps format and put it in any directory. In my example is /home/miguel as can view, and my logo is ant.eps I hope that work fine Regards Miguel Leo Gürtler escribió: Dear lyx-list, ist there a possibility to insert a small graphic (logo) on the head of each page (I use koma-script). thanks. best wishes leo smime.p7s Description: S/MIME Cryptographic Signature
Re: logo in headline
In the preamble of document write the next command : \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{/home/miguel/ant.eps}} \rhead{\smallskip\usebox{\mylogo}} \rhead{\usebox{\mylogo}} Previously make the logo in .eps format and put it in any directory. In my example is /home/miguel as can view, and my logo is ant.eps I hope that work fine Regards Miguel Leo Gürtler escribió: Dear lyx-list, ist there a possibility to insert a small graphic (logo) on the head of each page (I use koma-script). thanks. best wishes leo smime.p7s Description: S/MIME Cryptographic Signature
Re: logo in headline
See in the line 5, the example : \usepackage{scrpage2} \pagestyle{scrheadings} \usepackage{graphics} \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{testlogo.eps}} Here you must put the path to testlogo.eps, for example in Linux {/home/miguel/testlogo.eps}} or Windows {C:\testlogo.eps}} if you testlogo.eps are in the C:\ directory \rhead{\smallskip\usebox{\mylogo}} \rhead{\usebox{\mylogo}} ### Leo Gürtler escribió: icebna schrieb: Dear Miguel, yes you're right but this does not make a difference, if I put all the stuff in the latex preambel, see below for the error messages: it seems that a } is wrong, but I don't get it. best, leo that's all what's in the preambel + some dummy text in the document (docuclass: komascript article or book): ### \usepackage{scrpage2} \pagestyle{scrheadings} \usepackage{graphics} \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{testlogo.eps}} \rhead{\smallskip\usebox{\mylogo}} \rhead{\usebox{\mylogo}} ### the following errors appear: Argument of [EMAIL PROTECTED] has an extra }: ...\includegraphics[width=1cm]{testlogo.eps}} I've run across a `}' that doesn't seem to match anything. For example, `\def\a#1{...}' and `\a}' would produce this error. If you simply proceed now, the `\par' that I've just inserted will cause me to report a runaway argument that might be the root of the problem. But if your `}' was spurious, just type `2' and it will go away. Paragraph ended before [EMAIL PROTECTED] was complete.: ...\includegraphics[width=1cm]{testlogo.eps}} I suspect you've forgotten a `}', causing me to apply this control sequence to too much text. How can we recover? My plan is to forget the whole thing and hope for the best. Undefined control sequence: \rhead {\smallskip\usebox{\mylogo}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Error: Missing \begin{document}: \rhead{\smallskip\usebox{\mylogo} } You're in trouble here. Try typing return to proceed. If that doesn't work, type X return to quit. Undefined control sequence: \rhead {\usebox{\mylogo}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Hello Leo : Don't is in the ERT box, is in the menu Document → Configuration → Preamble LaTex where you must copy the piece code that I send you. Regards Miguel Leo Gürtler escribió: icebna schrieb: Dear Miguel, thanks a lot - but I got error messages. If it is ok I added my lyx file tot his mail, maybe you can help me or send me a small example (lyx file) from you (which works for you). thank your very much, best regards leo In the preamble of document write the next command : \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{/home/miguel/ant.eps}} \rhead{\smallskip\usebox{\mylogo}} \rhead{\usebox{\mylogo}} Previously make the logo in .eps format and put it in any directory. In my example is /home/miguel as can view, and my logo is ant.eps I hope that work fine Regards Miguel Leo Gürtler escribió: Dear lyx-list, ist there a possibility to insert a small graphic (logo) on the head of each page (I use koma-script). thanks. best wishes leo smime.p7s Description: S/MIME Cryptographic Signature
Re: logo in headline
Hello Leo : Don't is in the ERT box, is in the menu Document → Configuration → Preamble LaTex where you must copy the piece code that I send you. Regards Miguel Leo Gürtler escribió: icebna schrieb: Dear Miguel, thanks a lot - but I got error messages. If it is ok I added my lyx file tot his mail, maybe you can help me or send me a small example (lyx file) from you (which works for you). thank your very much, best regards leo In the preamble of document write the next command : \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{/home/miguel/ant.eps}} \rhead{\smallskip\usebox{\mylogo}} \rhead{\usebox{\mylogo}} Previously make the logo in .eps format and put it in any directory. In my example is /home/miguel as can view, and my logo is ant.eps I hope that work fine Regards Miguel Leo Gürtler escribió: Dear lyx-list, ist there a possibility to insert a small graphic (logo) on the head of each page (I use koma-script). thanks. best wishes leo smime.p7s Description: S/MIME Cryptographic Signature
Re: logo in headline
In the preamble of document write the next command : \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{/home/miguel/ant.eps}} \rhead{\smallskip\usebox{\mylogo}} \rhead{\usebox{\mylogo}} Previously make the logo in .eps format and put it in any directory. In my example is /home/miguel as can view, and my logo is ant.eps I hope that work fine Regards Miguel Leo Gürtler escribió: Dear lyx-list, ist there a possibility to insert a small graphic (logo) on the head of each page (I use koma-script). thanks. best wishes leo smime.p7s Description: S/MIME Cryptographic Signature
Re: logo in headline
See in the line 5, the example : \usepackage{scrpage2} \pagestyle{scrheadings} \usepackage{graphics} \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{testlogo.eps}} Here you must put the path to testlogo.eps, for example in Linux {/home/miguel/testlogo.eps}} or Windows {C:\testlogo.eps}} if you testlogo.eps are in the C:\ directory \rhead{\smallskip\usebox{\mylogo}} \rhead{\usebox{\mylogo}} ### Leo Gürtler escribió: icebna schrieb: Dear Miguel, yes you're right but this does not make a difference, if I put all the stuff in the latex preambel, see below for the error messages: it seems that a "}" is wrong, but I don't get it. best, leo that's all what's in the preambel + some dummy text in the document (docuclass: komascript article or book): ### \usepackage{scrpage2} \pagestyle{scrheadings} \usepackage{graphics} \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{testlogo.eps}} \rhead{\smallskip\usebox{\mylogo}} \rhead{\usebox{\mylogo}} ### the following errors appear: Argument of [EMAIL PROTECTED] has an extra }: ...\includegraphics[width=1cm]{testlogo.eps}} I've run across a `}' that doesn't seem to match anything. For example, `\def\a#1{...}' and `\a}' would produce this error. If you simply proceed now, the `\par' that I've just inserted will cause me to report a runaway argument that might be the root of the problem. But if your `}' was spurious, just type `2' and it will go away. Paragraph ended before [EMAIL PROTECTED] was complete.: ...\includegraphics[width=1cm]{testlogo.eps}} I suspect you've forgotten a `}', causing me to apply this control sequence to too much text. How can we recover? My plan is to forget the whole thing and hope for the best. Undefined control sequence: \rhead {\smallskip\usebox{\mylogo}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. LaTeX Error: Missing \begin{document}: \rhead{\smallskip\usebox{\mylogo} } You're in trouble here. Try typing to proceed. If that doesn't work, type X to quit. Undefined control sequence: \rhead {\usebox{\mylogo}} The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., `\hobx'), type `I' and the correct spelling (e.g., `I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Hello Leo : Don't is in the ERT box, is in the menu Document → Configuration → Preamble LaTex where you must copy the piece code that I send you. Regards Miguel Leo Gürtler escribió: icebna schrieb: Dear Miguel, thanks a lot - but I got error messages. If it is ok I added my lyx file tot his mail, maybe you can help me or send me a small example (lyx file) from you (which works for you). thank your very much, best regards leo In the preamble of document write the next command : \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{/home/miguel/ant.eps}} \rhead{\smallskip\usebox{\mylogo}} \rhead{\usebox{\mylogo}} Previously make the logo in .eps format and put it in any directory. In my example is /home/miguel as can view, and my logo is ant.eps I hope that work fine Regards Miguel Leo Gürtler escribió: Dear lyx-list, ist there a possibility to insert a small graphic (logo) on the head of each page (I use koma-script). thanks. best wishes leo smime.p7s Description: S/MIME Cryptographic Signature
Re: logo in headline
Hello Leo : Don't is in the ERT box, is in the menu Document → Configuration → Preamble LaTex where you must copy the piece code that I send you. Regards Miguel Leo Gürtler escribió: icebna schrieb: Dear Miguel, thanks a lot - but I got error messages. If it is ok I added my lyx file tot his mail, maybe you can help me or send me a small example (lyx file) from you (which works for you). thank your very much, best regards leo In the preamble of document write the next command : \newsavebox{\mylogo} \savebox{\mylogo}{\includegraphics[width=1cm]{/home/miguel/ant.eps}} \rhead{\smallskip\usebox{\mylogo}} \rhead{\usebox{\mylogo}} Previously make the logo in .eps format and put it in any directory. In my example is /home/miguel as can view, and my logo is ant.eps I hope that work fine Regards Miguel Leo Gürtler escribió: Dear lyx-list, ist there a possibility to insert a small graphic (logo) on the head of each page (I use koma-script). thanks. best wishes leo smime.p7s Description: S/MIME Cryptographic Signature
Re: lyx-1.5.0beta2 in Mandriva 2007
Olivier Ripoll escribió: Putting the discussion back to the mailing-list... --- icebna [EMAIL PROTECTED] a écrit : olive escribió: Someone idea ? I had the same problem. It seems that the uic and moc from the qt3-devel package are used in priority. Here is how I managed to solve the problem. First delete the whole directory and recreate it from the archive. Running 'make clean' is not enough. Before running configure, type the two following lines in the console: export UIC4=/usr/lib/qt4/bin/uic export MOC4=/usr/lib/qt4/bin/moc then you can run ./configure , it will know where to find the correct moc and uic. You maight have to uninstall the qt3-devel package, although I think it should be fine with it. You will need to delete (better : move or rename) you .lyx directory or you will miss the toolbars in 1.5 Also, be prepare for a big jump in the past: Qt4 without theme looks like motif, urg ;-/ By the way, this is solved by running qt4config I hope this helps. Best regards, Olivier Hi Olivier : I make your indications, and in the configure process, give me the error : checking size of wchar_t... configure: error: cannot compute sizeof (wchar_t), 77 and exit Someone idea It seems that this is due to wchar.h missing on your hard drive. When i look for it (locate wchar.h) on mine, it seems to be: /usr/include/wchar.h and /usr/include/bits/wchar.h Asking rpm for which files have provided them: rpm -q --whatprovides /usr/include/wchar.h the returned file is: glibc-devel-2.4-8mdv2007.1 (OK, I reckon I have a mix of 2007.1 and 2007.0 on this computer). Have you installed glibc-devel package ? It is the most basic devel package to install if you want to compile a program. If not, then I wonder if you will not have plenty of other errors later. You need to install devel packages for every library that LyX will use in order to compile it. A decent install should always have devel packages for glibc, gtk, X, qt, glib, stdc++ and a few other installed. Best regards, Olivier PS: actually, wchar_t may be defined in stddef.h, provided also by glibc-devel Yes, I have checked the packages and files wchar, and I have it, in /usr/include and /usr/include/bits, and also glibc-devel. The compilation process, detect the wchar_t file, but cannot define your sizeof. Thanks advanced Miguel smime.p7s Description: S/MIME Cryptographic Signature
Re: lyx-1.5.0beta2 in Mandriva 2007
Olivier Ripoll escribió: Putting the discussion back to the mailing-list... --- icebna [EMAIL PROTECTED] a écrit : olive escribió: Someone idea ? I had the same problem. It seems that the uic and moc from the qt3-devel package are used in priority. Here is how I managed to solve the problem. First delete the whole directory and recreate it from the archive. Running 'make clean' is not enough. Before running configure, type the two following lines in the console: export UIC4=/usr/lib/qt4/bin/uic export MOC4=/usr/lib/qt4/bin/moc then you can run ./configure , it will know where to find the correct moc and uic. You maight have to uninstall the qt3-devel package, although I think it should be fine with it. You will need to delete (better : move or rename) you .lyx directory or you will miss the toolbars in 1.5 Also, be prepare for a big jump in the past: Qt4 without theme looks like motif, urg ;-/ By the way, this is solved by running qt4config I hope this helps. Best regards, Olivier Hi Olivier : I make your indications, and in the configure process, give me the error : checking size of wchar_t... configure: error: cannot compute sizeof (wchar_t), 77 and exit Someone idea It seems that this is due to wchar.h missing on your hard drive. When i look for it (locate wchar.h) on mine, it seems to be: /usr/include/wchar.h and /usr/include/bits/wchar.h Asking rpm for which files have provided them: rpm -q --whatprovides /usr/include/wchar.h the returned file is: glibc-devel-2.4-8mdv2007.1 (OK, I reckon I have a mix of 2007.1 and 2007.0 on this computer). Have you installed glibc-devel package ? It is the most basic devel package to install if you want to compile a program. If not, then I wonder if you will not have plenty of other errors later. You need to install devel packages for every library that LyX will use in order to compile it. A decent install should always have devel packages for glibc, gtk, X, qt, glib, stdc++ and a few other installed. Best regards, Olivier PS: actually, wchar_t may be defined in stddef.h, provided also by glibc-devel Yes, I have checked the packages and files wchar, and I have it, in /usr/include and /usr/include/bits, and also glibc-devel. The compilation process, detect the wchar_t file, but cannot define your sizeof. Thanks advanced Miguel smime.p7s Description: S/MIME Cryptographic Signature
Re: lyx-1.5.0beta2 in Mandriva 2007
Olivier Ripoll escribió: Putting the discussion back to the mailing-list... --- icebna <[EMAIL PROTECTED]> a écrit : > olive escribió: > >> Someone idea ? > > > > I had the same problem. It seems that the uic and moc from the > qt3-devel > > package are used in priority. Here is how I managed to solve the > > problem. First delete the whole directory and recreate it from the > > archive. Running 'make clean' is not enough. Before running > configure, > > type the two following lines in the console: > > > > export UIC4="/usr/lib/qt4/bin/uic" > > export MOC4="/usr/lib/qt4/bin/moc" > > > > then you can run ./configure , it will know where to find the > correct > > moc and uic. You maight have to uninstall the qt3-devel package, > > although I think it should be fine with it. > > > > You will need to delete (better : move or rename) you .lyx > directory or > > you will miss the toolbars in 1.5 > > Also, be prepare for a big jump in the past: Qt4 without theme > looks > > like motif, urg ;-/ By the way, this is solved by running qt4config > > > > I hope this helps. > > > > Best regards, > > > > Olivier > > Hi Olivier : > > I make your indications, and in the configure process, give me the > error : > checking size of wchar_t... configure: error: cannot compute sizeof > (wchar_t), 77 > and exit > > Someone idea It seems that this is due to wchar.h missing on your hard drive. When i look for it ("locate wchar.h") on mine, it seems to be: /usr/include/wchar.h and /usr/include/bits/wchar.h Asking rpm for which files have provided them: "rpm -q --whatprovides /usr/include/wchar.h" the returned file is: glibc-devel-2.4-8mdv2007.1 (OK, I reckon I have a mix of 2007.1 and 2007.0 on this computer). Have you installed glibc-devel package ? It is the most basic devel package to install if you want to compile a program. If not, then I wonder if you will not have plenty of other errors later. You need to install devel packages for every library that LyX will use in order to compile it. A decent install should always have devel packages for glibc, gtk, X, qt, glib, stdc++ and a few other installed. Best regards, Olivier PS: actually, wchar_t may be defined in stddef.h, provided also by glibc-devel Yes, I have checked the packages and files wchar, and I have it, in /usr/include and /usr/include/bits, and also glibc-devel. The compilation process, detect the wchar_t file, but cannot define your sizeof. Thanks advanced Miguel smime.p7s Description: S/MIME Cryptographic Signature
lyx-1.5.0beta2 in Mandriva 2007
Hi all : Someone have installed the last version 1.5.0beta2 in a SO Mandriva 2007.0 ?. I can't install because of the frontend QT4, that Mandriva don't have ( QT3 ). Someone idea ? Miguel smime.p7s Description: S/MIME Cryptographic Signature
Re: lyx-1.5.0beta2 in Mandriva 2007
Jean-Marc Lasgouttes escribió: icebna == icebna [EMAIL PROTECTED] writes: icebna Hi all : Someone have installed the last version 1.5.0beta2 in icebna a SO Mandriva 2007.0 ?. I can't install because of the icebna frontend QT4, that Mandriva don't have ( QT3 ). Did you try to do a urpmi libqt4-devel? I am sure there is some qt4 available. JMarc I have installed the library libqt4-devel and libqt4-static-devel. In the process of compilation make, get the error : /usr/lib/qt3//bin/uic -tr lyx::qt_ BiblioUi.ui -o BiblioUi.h uic: File generated with too recent version of Qt Designer (4.0 vs. 3.3.6) and exit. Someone idea ? Miguel smime.p7s Description: S/MIME Cryptographic Signature
Re: lyx-1.5.0beta2 in Mandriva 2007
Jean-Marc Lasgouttes escribió: icebna == icebna [EMAIL PROTECTED] writes: icebna I have installed the library libqt4-devel and icebna libqt4-static-devel. In the process of compilation make, get icebna the error : icebna /usr/lib/qt3//bin/uic -tr lyx::qt_ BiblioUi.ui -o BiblioUi.h icebna uic: File generated with too recent version of Qt Designer icebna (4.0 vs. 3.3.6) icebna and exit. You probably have to install designer from another package. What does urpmi designer yield? JMarc I have installed qt4-designer and give me the same error an exit. Miguel smime.p7s Description: S/MIME Cryptographic Signature
Re: lyx-1.5.0beta2 in Mandriva 2007
Jean-Marc Lasgouttes escribió: icebna == icebna [EMAIL PROTECTED] writes: icebna I have installed qt4-designer and give me the same error an icebna exit. What are the programs provided by qt4-designer? How do you invoke configure? JMarc The files that provided the package qt4-designer are : /usr/bin/designer-qt4 /usr/lib/menu/libqt4-devel-designer /usr/lib/qt4/bin/designer /usr/lib/qt4/bin/designer-real /usr/share/applications/mandriva-designer-qt4.desktop Miguel smime.p7s Description: S/MIME Cryptographic Signature
lyx-1.5.0beta2 in Mandriva 2007
Hi all : Someone have installed the last version 1.5.0beta2 in a SO Mandriva 2007.0 ?. I can't install because of the frontend QT4, that Mandriva don't have ( QT3 ). Someone idea ? Miguel smime.p7s Description: S/MIME Cryptographic Signature
Re: lyx-1.5.0beta2 in Mandriva 2007
Jean-Marc Lasgouttes escribió: icebna == icebna [EMAIL PROTECTED] writes: icebna Hi all : Someone have installed the last version 1.5.0beta2 in icebna a SO Mandriva 2007.0 ?. I can't install because of the icebna frontend QT4, that Mandriva don't have ( QT3 ). Did you try to do a urpmi libqt4-devel? I am sure there is some qt4 available. JMarc I have installed the library libqt4-devel and libqt4-static-devel. In the process of compilation make, get the error : /usr/lib/qt3//bin/uic -tr lyx::qt_ BiblioUi.ui -o BiblioUi.h uic: File generated with too recent version of Qt Designer (4.0 vs. 3.3.6) and exit. Someone idea ? Miguel smime.p7s Description: S/MIME Cryptographic Signature
Re: lyx-1.5.0beta2 in Mandriva 2007
Jean-Marc Lasgouttes escribió: icebna == icebna [EMAIL PROTECTED] writes: icebna I have installed the library libqt4-devel and icebna libqt4-static-devel. In the process of compilation make, get icebna the error : icebna /usr/lib/qt3//bin/uic -tr lyx::qt_ BiblioUi.ui -o BiblioUi.h icebna uic: File generated with too recent version of Qt Designer icebna (4.0 vs. 3.3.6) icebna and exit. You probably have to install designer from another package. What does urpmi designer yield? JMarc I have installed qt4-designer and give me the same error an exit. Miguel smime.p7s Description: S/MIME Cryptographic Signature
Re: lyx-1.5.0beta2 in Mandriva 2007
Jean-Marc Lasgouttes escribió: icebna == icebna [EMAIL PROTECTED] writes: icebna I have installed qt4-designer and give me the same error an icebna exit. What are the programs provided by qt4-designer? How do you invoke configure? JMarc The files that provided the package qt4-designer are : /usr/bin/designer-qt4 /usr/lib/menu/libqt4-devel-designer /usr/lib/qt4/bin/designer /usr/lib/qt4/bin/designer-real /usr/share/applications/mandriva-designer-qt4.desktop Miguel smime.p7s Description: S/MIME Cryptographic Signature
lyx-1.5.0beta2 in Mandriva 2007
Hi all : Someone have installed the last version 1.5.0beta2 in a SO Mandriva 2007.0 ?. I can't install because of the frontend QT4, that Mandriva don't have ( QT3 ). Someone idea ? Miguel smime.p7s Description: S/MIME Cryptographic Signature
Re: lyx-1.5.0beta2 in Mandriva 2007
Jean-Marc Lasgouttes escribió: "icebna" == icebna <[EMAIL PROTECTED]> writes: icebna> Hi all : Someone have installed the last version 1.5.0beta2 in icebna> a SO Mandriva 2007.0 ?. I can't install because of the icebna> frontend QT4, that Mandriva don't have ( QT3 ). Did you try to do a "urpmi libqt4-devel"? I am sure there is some qt4 available. JMarc I have installed the library libqt4-devel and libqt4-static-devel. In the process of compilation make, get the error : /usr/lib/qt3//bin/uic -tr lyx::qt_ BiblioUi.ui -o BiblioUi.h uic: File generated with too recent version of Qt Designer (4.0 vs. 3.3.6) and exit. Someone idea ? Miguel smime.p7s Description: S/MIME Cryptographic Signature
Re: lyx-1.5.0beta2 in Mandriva 2007
Jean-Marc Lasgouttes escribió: "icebna" == icebna <[EMAIL PROTECTED]> writes: icebna> I have installed the library libqt4-devel and icebna> libqt4-static-devel. In the process of compilation make, get icebna> the error : icebna> /usr/lib/qt3//bin/uic -tr lyx::qt_ BiblioUi.ui -o BiblioUi.h icebna> uic: File generated with too recent version of Qt Designer icebna> (4.0 vs. 3.3.6) icebna> and exit. You probably have to install designer from another package. What does urpmi designer yield? JMarc I have installed qt4-designer and give me the same error an exit. Miguel smime.p7s Description: S/MIME Cryptographic Signature
Re: lyx-1.5.0beta2 in Mandriva 2007
Jean-Marc Lasgouttes escribió: "icebna" == icebna <[EMAIL PROTECTED]> writes: icebna> I have installed qt4-designer and give me the same error an icebna> exit. What are the programs provided by qt4-designer? How do you invoke configure? JMarc The files that provided the package qt4-designer are : /usr/bin/designer-qt4 /usr/lib/menu/libqt4-devel-designer /usr/lib/qt4/bin/designer /usr/lib/qt4/bin/designer-real /usr/share/applications/mandriva-designer-qt4.desktop Miguel smime.p7s Description: S/MIME Cryptographic Signature
lyx-1.4.4 to Fedora Core 6
Hi Shu Today Fedora Core 6 has updated the 1.4.4-2 version to SO Fedora Core 6. I hope that this version is compatible with your Red Hat. Regards Miguel
Re: trying to install LyX on Mandriva 2005
Follow the next step : ./configure --with-frontend=qt -with-pspell make checkinstall ( You must have this package installed ) When end, you shall have the rpm built, then rpm -ivh lyx-1.4.4.i386.rpm for example Also, instead of checkinstall you can use as root, make install Regards Miguel Ares wrote: Hello everyone, I am a happy LyX user on Win but now I'm trying to move to GNU/Linux. I downloaded lyx-1.4.4.tar.gz from ftp://ftp.lyx.org/pub/lyx/stable/lyx-1.4.4.tar.gz extracted archive content read install file tried ./configure but I get the following message: checking what frontend should be used for the GUI... none configure: error: Please select a frontend using --with-frontend Can anyone help me? (even though I know there's a lot of information missing here about system etc) Regards, Diego
Re: trying to install LyX on Mandriva 2005
This problem is a problem of compilator. You must of updated of compilator, the family of gcc package. Use the command as root : urpmi gcc, if you have a internet conexion, and then prove ./configure Regards Ares wrote: now after ./configure --with-frontend=qt -with-pspell after a while I get. config.status: creating Makefile config.status: error: cannot find input file: Makefile.in 2007/2/19, icebna [EMAIL PROTECTED]: Follow the next step : ./configure --with-frontend=qt -with-pspell make checkinstall ( You must have this package installed ) When end, you shall have the rpm built, then rpm -ivh lyx-1.4.4.i386.rpm for example Also, instead of checkinstall you can use as root, make install Regards Miguel Ares wrote: Hello everyone, I am a happy LyX user on Win but now I'm trying to move to GNU/Linux. I downloaded lyx-1.4.4.tar.gz from ftp://ftp.lyx.org/pub/lyx/stable/lyx-1.4.4.tar.gz extracted archive content read install file tried ./configure but I get the following message: checking what frontend should be used for the GUI... none configure: error: Please select a frontend using --with-frontend Can anyone help me? (even though I know there's a lot of information missing here about system etc) Regards, Diego
Re: trying to install LyX on Mandriva 2005
Alone see in the DVD installation ?. Use the command - as root : urpmq --list-media, and say me the output. Ares wrote: system looks for the installation DVD and says everything's already installed... mhm... 2007/2/19, icebna [EMAIL PROTECTED]: This problem is a problem of compilator. You must of updated of compilator, the family of gcc package. Use the command as root : urpmi gcc, if you have a internet conexion, and then prove ./configure Regards Ares wrote: now after ./configure --with-frontend=qt -with-pspell after a while I get. config.status: creating Makefile config.status: error: cannot find input file: Makefile.in 2007/2/19, icebna [EMAIL PROTECTED]: Follow the next step : ./configure --with-frontend=qt -with-pspell make checkinstall ( You must have this package installed ) When end, you shall have the rpm built, then rpm -ivh lyx-1.4.4.i386.rpm for example Also, instead of checkinstall you can use as root, make install Regards Miguel Ares wrote: Hello everyone, I am a happy LyX user on Win but now I'm trying to move to GNU/Linux. I downloaded lyx-1.4.4.tar.gz from ftp://ftp.lyx.org/pub/lyx/stable/lyx-1.4.4.tar.gz extracted archive content read install file tried ./configure but I get the following message: checking what frontend should be used for the GUI... none configure: error: Please select a frontend using --with-frontend Can anyone help me? (even though I know there's a lot of information missing here about system etc) Regards, Diego
Re: trying to install LyX on Mandriva 2005
Enter in the the Center of Mandriva's control, where the computer is configure, in the menu : Choose where the packages of software discharged when the system is updated, choose add and accept everything what you should appear, since you there is absent the repositories Main - Main Updates, Contrib and Contrib updates, that should can to contain necessary tools to compile adequately. Perhaps isn't the devel tool installed, also --the packages xxx-devel. Ares wrote: 2007/2/19, icebna [EMAIL PROTECTED]: Alone see in the DVD installation ?. Use the command - as root : urpmq --list-media, and say me the output. I can't retrieve the path to the removable device Installation Download DVD (cdrom1) Installation Download DVD (cdrom1) update_source (First line is my translation from Italian) Ares wrote: system looks for the installation DVD and says everything's already installed... mhm... 2007/2/19, icebna [EMAIL PROTECTED]: This problem is a problem of compilator. You must of updated of compilator, the family of gcc package. Use the command as root : urpmi gcc, if you have a internet conexion, and then prove ./configure Regards Ares wrote: now after ./configure --with-frontend=qt -with-pspell after a while I get. config.status: creating Makefile config.status: error: cannot find input file: Makefile.in 2007/2/19, icebna [EMAIL PROTECTED]: Follow the next step : ./configure --with-frontend=qt -with-pspell make checkinstall ( You must have this package installed ) When end, you shall have the rpm built, then rpm -ivh lyx-1.4.4.i386.rpm for example Also, instead of checkinstall you can use as root, make install Regards Miguel Ares wrote: Hello everyone, I am a happy LyX user on Win but now I'm trying to move to GNU/Linux. I downloaded lyx-1.4.4.tar.gz from ftp://ftp.lyx.org/pub/lyx/stable/lyx-1.4.4.tar.gz extracted archive content read install file tried ./configure but I get the following message: checking what frontend should be used for the GUI... none configure: error: Please select a frontend using --with-frontend Can anyone help me? (even though I know there's a lot of information missing here about system etc) Regards, Diego
lyx-1.4.4 to Fedora Core 6
Hi Shu Today Fedora Core 6 has updated the 1.4.4-2 version to SO Fedora Core 6. I hope that this version is compatible with your Red Hat. Regards Miguel
Re: trying to install LyX on Mandriva 2005
Follow the next step : ./configure --with-frontend=qt -with-pspell make checkinstall ( You must have this package installed ) When end, you shall have the rpm built, then rpm -ivh lyx-1.4.4.i386.rpm for example Also, instead of checkinstall you can use as root, make install Regards Miguel Ares wrote: Hello everyone, I am a happy LyX user on Win but now I'm trying to move to GNU/Linux. I downloaded lyx-1.4.4.tar.gz from ftp://ftp.lyx.org/pub/lyx/stable/lyx-1.4.4.tar.gz extracted archive content read install file tried ./configure but I get the following message: checking what frontend should be used for the GUI... none configure: error: Please select a frontend using --with-frontend Can anyone help me? (even though I know there's a lot of information missing here about system etc) Regards, Diego
Re: trying to install LyX on Mandriva 2005
This problem is a problem of compilator. You must of updated of compilator, the family of gcc package. Use the command as root : urpmi gcc, if you have a internet conexion, and then prove ./configure Regards Ares wrote: now after ./configure --with-frontend=qt -with-pspell after a while I get. config.status: creating Makefile config.status: error: cannot find input file: Makefile.in 2007/2/19, icebna [EMAIL PROTECTED]: Follow the next step : ./configure --with-frontend=qt -with-pspell make checkinstall ( You must have this package installed ) When end, you shall have the rpm built, then rpm -ivh lyx-1.4.4.i386.rpm for example Also, instead of checkinstall you can use as root, make install Regards Miguel Ares wrote: Hello everyone, I am a happy LyX user on Win but now I'm trying to move to GNU/Linux. I downloaded lyx-1.4.4.tar.gz from ftp://ftp.lyx.org/pub/lyx/stable/lyx-1.4.4.tar.gz extracted archive content read install file tried ./configure but I get the following message: checking what frontend should be used for the GUI... none configure: error: Please select a frontend using --with-frontend Can anyone help me? (even though I know there's a lot of information missing here about system etc) Regards, Diego
Re: trying to install LyX on Mandriva 2005
Alone see in the DVD installation ?. Use the command - as root : urpmq --list-media, and say me the output. Ares wrote: system looks for the installation DVD and says everything's already installed... mhm... 2007/2/19, icebna [EMAIL PROTECTED]: This problem is a problem of compilator. You must of updated of compilator, the family of gcc package. Use the command as root : urpmi gcc, if you have a internet conexion, and then prove ./configure Regards Ares wrote: now after ./configure --with-frontend=qt -with-pspell after a while I get. config.status: creating Makefile config.status: error: cannot find input file: Makefile.in 2007/2/19, icebna [EMAIL PROTECTED]: Follow the next step : ./configure --with-frontend=qt -with-pspell make checkinstall ( You must have this package installed ) When end, you shall have the rpm built, then rpm -ivh lyx-1.4.4.i386.rpm for example Also, instead of checkinstall you can use as root, make install Regards Miguel Ares wrote: Hello everyone, I am a happy LyX user on Win but now I'm trying to move to GNU/Linux. I downloaded lyx-1.4.4.tar.gz from ftp://ftp.lyx.org/pub/lyx/stable/lyx-1.4.4.tar.gz extracted archive content read install file tried ./configure but I get the following message: checking what frontend should be used for the GUI... none configure: error: Please select a frontend using --with-frontend Can anyone help me? (even though I know there's a lot of information missing here about system etc) Regards, Diego
Re: trying to install LyX on Mandriva 2005
Enter in the the Center of Mandriva's control, where the computer is configure, in the menu : Choose where the packages of software discharged when the system is updated, choose add and accept everything what you should appear, since you there is absent the repositories Main - Main Updates, Contrib and Contrib updates, that should can to contain necessary tools to compile adequately. Perhaps isn't the devel tool installed, also --the packages xxx-devel. Ares wrote: 2007/2/19, icebna [EMAIL PROTECTED]: Alone see in the DVD installation ?. Use the command - as root : urpmq --list-media, and say me the output. I can't retrieve the path to the removable device Installation Download DVD (cdrom1) Installation Download DVD (cdrom1) update_source (First line is my translation from Italian) Ares wrote: system looks for the installation DVD and says everything's already installed... mhm... 2007/2/19, icebna [EMAIL PROTECTED]: This problem is a problem of compilator. You must of updated of compilator, the family of gcc package. Use the command as root : urpmi gcc, if you have a internet conexion, and then prove ./configure Regards Ares wrote: now after ./configure --with-frontend=qt -with-pspell after a while I get. config.status: creating Makefile config.status: error: cannot find input file: Makefile.in 2007/2/19, icebna [EMAIL PROTECTED]: Follow the next step : ./configure --with-frontend=qt -with-pspell make checkinstall ( You must have this package installed ) When end, you shall have the rpm built, then rpm -ivh lyx-1.4.4.i386.rpm for example Also, instead of checkinstall you can use as root, make install Regards Miguel Ares wrote: Hello everyone, I am a happy LyX user on Win but now I'm trying to move to GNU/Linux. I downloaded lyx-1.4.4.tar.gz from ftp://ftp.lyx.org/pub/lyx/stable/lyx-1.4.4.tar.gz extracted archive content read install file tried ./configure but I get the following message: checking what frontend should be used for the GUI... none configure: error: Please select a frontend using --with-frontend Can anyone help me? (even though I know there's a lot of information missing here about system etc) Regards, Diego
lyx-1.4.4 to Fedora Core 6
Hi Shu Today Fedora Core 6 has updated the 1.4.4-2 version to SO Fedora Core 6. I hope that this version is compatible with your Red Hat. Regards Miguel
Re: trying to install LyX on Mandriva 2005
Follow the next step : ./configure --with-frontend=qt -with-pspell make checkinstall ( You must have this package installed ) When end, you shall have the rpm built, then rpm -ivh lyx-1.4.4.i386.rpm for example Also, instead of checkinstall you can use as root, make install Regards Miguel Ares wrote: Hello everyone, I am a happy LyX user on Win but now I'm trying to move to GNU/Linux. I downloaded lyx-1.4.4.tar.gz from ftp://ftp.lyx.org/pub/lyx/stable/lyx-1.4.4.tar.gz extracted archive content read install file tried ./configure but I get the following message: checking what frontend should be used for the GUI... none configure: error: "Please select a frontend using --with-frontend" Can anyone help me? (even though I know there's a lot of information missing here about system etc) Regards, Diego
Re: trying to install LyX on Mandriva 2005
This problem is a problem of compilator. You must of updated of compilator, the family of gcc package. Use the command as root : urpmi gcc, if you have a internet conexion, and then prove ./configure Regards Ares wrote: now after ./configure --with-frontend=qt -with-pspell after a while I get. config.status: creating Makefile config.status: error: cannot find input file: Makefile.in 2007/2/19, icebna <[EMAIL PROTECTED]>: Follow the next step : ./configure --with-frontend=qt -with-pspell make checkinstall ( You must have this package installed ) When end, you shall have the rpm built, then rpm -ivh lyx-1.4.4.i386.rpm for example Also, instead of checkinstall you can use as root, make install Regards Miguel Ares wrote: > Hello everyone, > > I am a happy LyX user on Win but now I'm trying to move to GNU/Linux. > > I downloaded lyx-1.4.4.tar.gz from > ftp://ftp.lyx.org/pub/lyx/stable/lyx-1.4.4.tar.gz > extracted archive content > read install file > tried ./configure but I get the following message: > > checking what frontend should be used for the GUI... none > configure: error: "Please select a frontend using --with-frontend" > > Can anyone help me? (even though I know there's a lot of information > missing here about system etc) > > Regards, > Diego > >
Re: trying to install LyX on Mandriva 2005
Alone see in the DVD installation ?. Use the command - as root : urpmq --list-media, and say me the output. Ares wrote: system looks for the installation DVD and says everything's already installed... mhm... 2007/2/19, icebna <[EMAIL PROTECTED]>: This problem is a problem of compilator. You must of updated of compilator, the family of gcc package. Use the command as root : urpmi gcc, if you have a internet conexion, and then prove ./configure Regards Ares wrote: > now after > > ./configure --with-frontend=qt -with-pspell > > after a while I get. > > config.status: creating Makefile > config.status: error: cannot find input file: Makefile.in > > > 2007/2/19, icebna <[EMAIL PROTECTED]>: >> Follow the next step : >> >> ./configure --with-frontend=qt -with-pspell >> make >> checkinstall ( You must have this package installed ) >> When end, you shall have the rpm built, then >> rpm -ivh lyx-1.4.4.i386.rpm for example >> >> Also, instead of checkinstall you can use as root, make install >> >> Regards >> >> Miguel >> >> >> >> Ares wrote: >> > Hello everyone, >> > >> > I am a happy LyX user on Win but now I'm trying to move to GNU/Linux. >> > >> > I downloaded lyx-1.4.4.tar.gz from >> > ftp://ftp.lyx.org/pub/lyx/stable/lyx-1.4.4.tar.gz >> > extracted archive content >> > read install file >> > tried ./configure but I get the following message: >> > >> > checking what frontend should be used for the GUI... none >> > configure: error: "Please select a frontend using --with-frontend" >> > >> > Can anyone help me? (even though I know there's a lot of information >> > missing here about system etc) >> > >> > Regards, >> > Diego >> > >> > >> >> > >
Re: trying to install LyX on Mandriva 2005
Enter in the the Center of Mandriva's control, where the computer is configure, in the menu : Choose where the packages of software discharged when the system is updated, choose add and accept everything what you should appear, since you there is absent the repositories Main - Main Updates, Contrib and Contrib updates, that should can to contain necessary tools to compile adequately. Perhaps isn't the devel tool installed, also --the packages xxx-devel. Ares wrote: 2007/2/19, icebna <[EMAIL PROTECTED]>: Alone see in the DVD installation ?. Use the command - as root : urpmq --list-media, and say me the output. I can't retrieve the path to the removable device "Installation Download DVD (cdrom1)" Installation Download DVD (cdrom1) update_source (First line is my translation from Italian) Ares wrote: > system looks for the installation DVD and says everything's already > installed... mhm... > > 2007/2/19, icebna <[EMAIL PROTECTED]>: >> This problem is a problem of compilator. You must of updated of >> compilator, the family of gcc package. Use the command as root : >> urpmi gcc, if you have a internet conexion, and then prove ./configure >> >> Regards >> >> Ares wrote: >> > now after >> > >> > ./configure --with-frontend=qt -with-pspell >> > >> > after a while I get. >> > >> > config.status: creating Makefile >> > config.status: error: cannot find input file: Makefile.in >> > >> > >> > 2007/2/19, icebna <[EMAIL PROTECTED]>: >> >> Follow the next step : >> >> >> >> ./configure --with-frontend=qt -with-pspell >> >> make >> >> checkinstall ( You must have this package installed ) >> >> When end, you shall have the rpm built, then >> >> rpm -ivh lyx-1.4.4.i386.rpm for example >> >> >> >> Also, instead of checkinstall you can use as root, make install >> >> >> >> Regards >> >> >> >> Miguel >> >> >> >> >> >> >> >> Ares wrote: >> >> > Hello everyone, >> >> > >> >> > I am a happy LyX user on Win but now I'm trying to move to >> GNU/Linux. >> >> > >> >> > I downloaded lyx-1.4.4.tar.gz from >> >> > ftp://ftp.lyx.org/pub/lyx/stable/lyx-1.4.4.tar.gz >> >> > extracted archive content >> >> > read install file >> >> > tried ./configure but I get the following message: >> >> > >> >> > checking what frontend should be used for the GUI... none >> >> > configure: error: "Please select a frontend using --with-frontend" >> >> > >> >> > Can anyone help me? (even though I know there's a lot of information >> >> > missing here about system etc) >> >> > >> >> > Regards, >> >> > Diego >> >> > >> >> > >> >> >> >> >> > >> > >> >> > >
Re: LyX 1.4.4 installation hangs, please help
In the http://wiki.lyx.org - CreatingLyXRPM, can you have help about you problem--- You must have installed de package checkinstall. If the old version work fine, can be that you don't have some librarie, that the new version need it. If don't work, hope the rpm official de Red Hat or Fedora Core. Regards Shu Li wrote: Hi Miguel, Thank you for the suggestion. I am using Red Hat EL4. Since I am not root, so I have to use --prefix. best, Sam On 2/16/07, icebna [EMAIL PROTECTED] wrote: What distro you have ? Also can prove without --prefix, I compiled with --with frontend=qt --with-pspell Regards Miguel Shu Li wrote: Hi, I downloaded the .bz2 package of lyx 1.4.4, and go configure --prefix=/home/lishu/usr --with-frontend=qt and make, and it hangs here: * gmake[8]: Leaving directory `/home/lishu/download/lyx-1.4.4 /src/frontends/qt2/ui' gmake all-recursive gmake[8]: Entering directory `/home/lishu/download/lyx-1.4.4 /src/frontends/qt2/ui' Making all in . gmake[9]: Entering directory `/home/lishu/download/lyx-1.4.4 /src/frontends/qt2/ui' /usr/lib/qt-3.3/bin/uic -nounload -tr qt_ BiblioModuleBase.ui -o BiblioModuleBase.h /usr/lib/qt-3.3/bin/uic -nounload -tr qt_ -impl `echo BiblioModuleBase.h BiblioModuleBase.ui pch.h.gch |sed 's/[^ ]*pch.h.gch//'` -o BiblioModuleBase.C I have tried 3 times and it always hangs after this line. No error or others anywhere, just hangs. I am using qt3.3 and gcc3.4.3. And I could install lyx 1.4.3 very well. Could anyone give me a hint what's possibly wrong? Thanks. best, Sam
Re: LyX 1.4.4 installation hangs, please help
In the http://wiki.lyx.org - CreatingLyXRPM, can you have help about you problem--- You must have installed de package checkinstall. If the old version work fine, can be that you don't have some librarie, that the new version need it. If don't work, hope the rpm official de Red Hat or Fedora Core. Regards Shu Li wrote: Hi Miguel, Thank you for the suggestion. I am using Red Hat EL4. Since I am not root, so I have to use --prefix. best, Sam On 2/16/07, icebna [EMAIL PROTECTED] wrote: What distro you have ? Also can prove without --prefix, I compiled with --with frontend=qt --with-pspell Regards Miguel Shu Li wrote: Hi, I downloaded the .bz2 package of lyx 1.4.4, and go configure --prefix=/home/lishu/usr --with-frontend=qt and make, and it hangs here: * gmake[8]: Leaving directory `/home/lishu/download/lyx-1.4.4 /src/frontends/qt2/ui' gmake all-recursive gmake[8]: Entering directory `/home/lishu/download/lyx-1.4.4 /src/frontends/qt2/ui' Making all in . gmake[9]: Entering directory `/home/lishu/download/lyx-1.4.4 /src/frontends/qt2/ui' /usr/lib/qt-3.3/bin/uic -nounload -tr qt_ BiblioModuleBase.ui -o BiblioModuleBase.h /usr/lib/qt-3.3/bin/uic -nounload -tr qt_ -impl `echo BiblioModuleBase.h BiblioModuleBase.ui pch.h.gch |sed 's/[^ ]*pch.h.gch//'` -o BiblioModuleBase.C I have tried 3 times and it always hangs after this line. No error or others anywhere, just hangs. I am using qt3.3 and gcc3.4.3. And I could install lyx 1.4.3 very well. Could anyone give me a hint what's possibly wrong? Thanks. best, Sam
Re: LyX 1.4.4 installation hangs, please help
In the http://wiki.lyx.org - CreatingLyXRPM, can you have help about you problem--- You must have installed de package checkinstall. If the old version work fine, can be that you don't have some librarie, that the new version need it. If don't work, hope the rpm official de Red Hat or Fedora Core. Regards Shu Li wrote: Hi Miguel, Thank you for the suggestion. I am using Red Hat EL4. Since I am not root, so I have to use --prefix. best, Sam On 2/16/07, icebna <[EMAIL PROTECTED]> wrote: What distro you have ? Also can prove without --prefix, I compiled with --with frontend=qt --with-pspell Regards Miguel Shu Li wrote: > Hi, > > I downloaded the .bz2 package of lyx 1.4.4, and go "configure > --prefix=/home/lishu/usr --with-frontend=qt" and "make", and it hangs here: > > * > > gmake[8]: Leaving directory `/home/lishu/download/lyx-1.4.4 > /src/frontends/qt2/ui' > gmake all-recursive > gmake[8]: Entering directory `/home/lishu/download/lyx-1.4.4 > /src/frontends/qt2/ui' > Making all in . > gmake[9]: Entering directory `/home/lishu/download/lyx-1.4.4 > /src/frontends/qt2/ui' > /usr/lib/qt-3.3/bin/uic -nounload -tr qt_ BiblioModuleBase.ui -o > BiblioModuleBase.h > /usr/lib/qt-3.3/bin/uic -nounload -tr qt_ -impl `echo BiblioModuleBase.h > BiblioModuleBase.ui pch.h.gch |sed 's/[^ ]*pch.h.gch//'` -o > BiblioModuleBase.C > > > > I have tried 3 times and it always hangs after this line. No error or > others > anywhere, just hangs. I am using qt3.3 and gcc3.4.3. And I could install > lyx > 1.4.3 very well. Could anyone give me a hint what's possibly wrong? Thanks. > > best, > Sam >
Re: LyX 1.4.4 installation hangs, please help
What distro you have ? Also can prove without --prefix, I compiled with --with frontend=qt --with-pspell Regards Miguel Shu Li wrote: Hi, I downloaded the .bz2 package of lyx 1.4.4, and go configure --prefix=/home/lishu/usr --with-frontend=qt and make, and it hangs here: * gmake[8]: Leaving directory `/home/lishu/download/lyx-1.4.4 /src/frontends/qt2/ui' gmake all-recursive gmake[8]: Entering directory `/home/lishu/download/lyx-1.4.4 /src/frontends/qt2/ui' Making all in . gmake[9]: Entering directory `/home/lishu/download/lyx-1.4.4 /src/frontends/qt2/ui' /usr/lib/qt-3.3/bin/uic -nounload -tr qt_ BiblioModuleBase.ui -o BiblioModuleBase.h /usr/lib/qt-3.3/bin/uic -nounload -tr qt_ -impl `echo BiblioModuleBase.h BiblioModuleBase.ui pch.h.gch |sed 's/[^ ]*pch.h.gch//'` -o BiblioModuleBase.C I have tried 3 times and it always hangs after this line. No error or others anywhere, just hangs. I am using qt3.3 and gcc3.4.3. And I could install lyx 1.4.3 very well. Could anyone give me a hint what's possibly wrong? Thanks. best, Sam
Re: LyX 1.4.4 installation hangs, please help
What distro you have ? Also can prove without --prefix, I compiled with --with frontend=qt --with-pspell Regards Miguel Shu Li wrote: Hi, I downloaded the .bz2 package of lyx 1.4.4, and go configure --prefix=/home/lishu/usr --with-frontend=qt and make, and it hangs here: * gmake[8]: Leaving directory `/home/lishu/download/lyx-1.4.4 /src/frontends/qt2/ui' gmake all-recursive gmake[8]: Entering directory `/home/lishu/download/lyx-1.4.4 /src/frontends/qt2/ui' Making all in . gmake[9]: Entering directory `/home/lishu/download/lyx-1.4.4 /src/frontends/qt2/ui' /usr/lib/qt-3.3/bin/uic -nounload -tr qt_ BiblioModuleBase.ui -o BiblioModuleBase.h /usr/lib/qt-3.3/bin/uic -nounload -tr qt_ -impl `echo BiblioModuleBase.h BiblioModuleBase.ui pch.h.gch |sed 's/[^ ]*pch.h.gch//'` -o BiblioModuleBase.C I have tried 3 times and it always hangs after this line. No error or others anywhere, just hangs. I am using qt3.3 and gcc3.4.3. And I could install lyx 1.4.3 very well. Could anyone give me a hint what's possibly wrong? Thanks. best, Sam
Re: LyX 1.4.4 installation hangs, please help
What distro you have ? Also can prove without --prefix, I compiled with --with frontend=qt --with-pspell Regards Miguel Shu Li wrote: Hi, I downloaded the .bz2 package of lyx 1.4.4, and go "configure --prefix=/home/lishu/usr --with-frontend=qt" and "make", and it hangs here: * gmake[8]: Leaving directory `/home/lishu/download/lyx-1.4.4 /src/frontends/qt2/ui' gmake all-recursive gmake[8]: Entering directory `/home/lishu/download/lyx-1.4.4 /src/frontends/qt2/ui' Making all in . gmake[9]: Entering directory `/home/lishu/download/lyx-1.4.4 /src/frontends/qt2/ui' /usr/lib/qt-3.3/bin/uic -nounload -tr qt_ BiblioModuleBase.ui -o BiblioModuleBase.h /usr/lib/qt-3.3/bin/uic -nounload -tr qt_ -impl `echo BiblioModuleBase.h BiblioModuleBase.ui pch.h.gch |sed 's/[^ ]*pch.h.gch//'` -o BiblioModuleBase.C I have tried 3 times and it always hangs after this line. No error or others anywhere, just hangs. I am using qt3.3 and gcc3.4.3. And I could install lyx 1.4.3 very well. Could anyone give me a hint what's possibly wrong? Thanks. best, Sam
Re: EPS problem
I had a similar problem, and it was a bug of the package tetex-dvips. Probe with some previous version and possibly the problem disappears. Regards Miguel John Hughes wrote: I would like to include EPS figures in my documents, but when I insert them they do not appear in the resulting PDF files. The documentation implies that EPS files should be supported natively - what am I doing wrong? John _ Find Love This New Year With match.com! http://msnuk.match.com