>> I can do it with ERT is there a LyX or other more elegant way?
>>
>>
>> ERT way adds following
>> \setcounter{section}{0}
>> after subsequent section headers. I guess you could redefine \part in
>> latex preamble or put into a module even and use it as a custom inset?
>>
>>
>
> \makeatletter
>
2010/1/15 Richard Brown rich...@guidedelearning.com:
Hello again.
I'm struggling still, though I can now see some progress...
But my problem now is that I have an unwanted empty white page after
some, but not all, chapters. I can't see any logic as to why, either in
my input ms or in the
in raw LaTeX there is a package pdflscape which allows you to set an
environment (\begin{landscape}..\end{landscape}. Content in between is
rotated, but headers and footers are left as per normal.
I have used this with a rotated supertabular which stetched over a few
pages. Don't know whether lyX
It work for a table I had in a Komascript book
in latex preamble insert \usepackage{pdflscape}
then use ERT (ctrl-l) before and after table to insert
\begin{landscape} and \end{landscape}repectively
2010/1/15 stephen's mailinglist account stephen4mailingli...@googlemail.com:
in raw LaTeX
2010/1/15 stephen's mailinglist account stephen4mailingli...@googlemail.com:
It work for a table I had in a Komascript book
in latex preamble insert \usepackage{pdflscape}
then use ERT (ctrl-l) before and after table to insert
\begin{landscape} and \end{landscape}repectively
2010/1/15
problems: however,the table is printed off the page to the right, except
for the first column.
On Fri, 2010-01-15 at 12:49 +, stephen's mailinglist account wrote:
It work for a table I had in a Komascript book
in latex preamble insert \usepackage{pdflscape}
then use ERT (ctrl-l) before
SteveT,
In my book there is one table that is wide but short. I set that one page
in landscape orientation while all other pages are in portrait orientation.
Worked just fine.
Rich
How did you do that ?- I have used ERT
--
Stephen
was a long table.
2010/1/15 Rich Shepard rshep...@appl-ecosys.com:
On Fri, 15 Jan 2010, stephen's mailinglist account wrote:
How did you do that ?- I have used ERT
I probably used ERT, too. It's been about 5 years now and I don't see
anything in the .lyx file, but I can see the results
2010/1/15 Rob Oakes lyx-de...@oak-tree.us:
Dear Daniel, Liviu and Other LyX Users,
Daniel and Liviu, thank you very much for the recommendations and for the
link. I've been experimenting with the \afterpage package all morning, and I
am very happy to report that it works famously. I am
Can more than one inset layout be placed in a module? Or does this
(landscape longtable) have to be a second module?
2010/1/15 stephen's mailinglist account stephen4mailingli...@googlemail.com:
2010/1/15 Rob Oakes lyx-de...@oak-tree.us:
Dear Daniel, Liviu and Other LyX Users,
Daniel and Liviu
2010/1/15 Richard Brown rich...@guidedelearning.com:
Hello again.
I'm struggling still, though I can now see some progress...
But my problem now is that I have an unwanted empty white page after
some, but not all, chapters. I can't see any logic as to why, either in
my input ms or in the
in raw LaTeX there is a package pdflscape which allows you to set an
environment (\begin{landscape}..\end{landscape}. Content in between is
rotated, but headers and footers are left as per normal.
I have used this with a rotated supertabular which stetched over a few
pages. Don't know whether lyX
It work for a table I had in a Komascript book
in latex preamble insert \usepackage{pdflscape}
then use ERT (ctrl-l) before and after table to insert
\begin{landscape} and \end{landscape}repectively
2010/1/15 stephen's mailinglist account stephen4mailingli...@googlemail.com:
in raw LaTeX
2010/1/15 stephen's mailinglist account stephen4mailingli...@googlemail.com:
It work for a table I had in a Komascript book
in latex preamble insert \usepackage{pdflscape}
then use ERT (ctrl-l) before and after table to insert
\begin{landscape} and \end{landscape}repectively
2010/1/15
problems: however,the table is printed off the page to the right, except
for the first column.
On Fri, 2010-01-15 at 12:49 +, stephen's mailinglist account wrote:
It work for a table I had in a Komascript book
in latex preamble insert \usepackage{pdflscape}
then use ERT (ctrl-l) before
SteveT,
In my book there is one table that is wide but short. I set that one page
in landscape orientation while all other pages are in portrait orientation.
Worked just fine.
Rich
How did you do that ?- I have used ERT
--
Stephen
was a long table.
2010/1/15 Rich Shepard rshep...@appl-ecosys.com:
On Fri, 15 Jan 2010, stephen's mailinglist account wrote:
How did you do that ?- I have used ERT
I probably used ERT, too. It's been about 5 years now and I don't see
anything in the .lyx file, but I can see the results
2010/1/15 Rob Oakes lyx-de...@oak-tree.us:
Dear Daniel, Liviu and Other LyX Users,
Daniel and Liviu, thank you very much for the recommendations and for the
link. I've been experimenting with the \afterpage package all morning, and I
am very happy to report that it works famously. I am
Can more than one inset layout be placed in a module? Or does this
(landscape longtable) have to be a second module?
2010/1/15 stephen's mailinglist account stephen4mailingli...@googlemail.com:
2010/1/15 Rob Oakes lyx-de...@oak-tree.us:
Dear Daniel, Liviu and Other LyX Users,
Daniel and Liviu
2010/1/15 Richard Brown :
> Hello again.
>
> I'm struggling still, though I can now see some progress...
> But my problem now is that I have an unwanted empty white page after
> some, but not all, chapters. I can't see any logic as to why, either in
> my input ms or in
in raw LaTeX there is a package pdflscape which allows you to set an
environment (\begin{landscape}..\end{landscape}. Content in between is
rotated, but headers and footers are left as per normal.
I have used this with a rotated supertabular which stetched over a few
pages. Don't know whether lyX
It work for a table I had in a Komascript book
in latex preamble insert \usepackage{pdflscape}
then use ERT (ctrl-l) before and after table to insert
\begin{landscape} and \end{landscape}repectively
2010/1/15 stephen's mailinglist account <stephen4mailingli...@googlemail.com>:
> in
2010/1/15 stephen's mailinglist account <stephen4mailingli...@googlemail.com>:
> It work for a table I had in a Komascript book
>
> in latex preamble insert \usepackage{pdflscape}
> then use ERT (ctrl-l) before and after table to insert
> \begin{landscape} and \end{
s without
> problems: however,the table is printed off the page to the right, except
> for the first column.
>
> On Fri, 2010-01-15 at 12:49 +, stephen's mailinglist account wrote:
>> It work for a table I had in a Komascript book
>>
>> in latex preamble insert
> SteveT,
>
> In my book there is one table that is wide but short. I set that one page
> in landscape orientation while all other pages are in portrait orientation.
> Worked just fine.
>
> Rich
>
How did you do that ?- I have used ERT
--
Stephen
was a long table.
2010/1/15 Rich Shepard <rshep...@appl-ecosys.com>:
> On Fri, 15 Jan 2010, stephen's mailinglist account wrote:
>
>> How did you do that ?- I have used ERT
>
> I probably used ERT, too. It's been about 5 years now and I don't see
> anything in the .lyx file
2010/1/15 Rob Oakes :
> Dear Daniel, Liviu and Other LyX Users,
>
> Daniel and Liviu, thank you very much for the recommendations and for the
> link. I've been experimenting with the \afterpage package all morning, and I
> am very happy to report that it works famously.
Can more than one inset layout be placed in a module? Or does this
(landscape longtable) have to be a second module?
2010/1/15 stephen's mailinglist account <stephen4mailingli...@googlemail.com>:
> 2010/1/15 Rob Oakes <lyx-de...@oak-tree.us>:
>> Dear Daniel, Livi
On Wed, Jan 13, 2010 at 1:48 PM, Enrico Guastaldi
enrico.guasta...@gmail.com wrote:
Dear Stephen,
Actually I cannot report a problem, because nothing happens when I click the
button Create PDF after inserting Nomenclature entry and Nomenclature
List.
Should I do some procedure to report the
On Wed, Jan 13, 2010 at 1:48 PM, Enrico Guastaldi
enrico.guasta...@gmail.com wrote:
Dear Stephen,
Actually I cannot report a problem, because nothing happens when I click the
button Create PDF after inserting Nomenclature entry and Nomenclature
List.
Should I do some procedure to report the
On Wed, Jan 13, 2010 at 1:48 PM, Enrico Guastaldi
wrote:
> Dear Stephen,
> Actually I cannot report a problem, because nothing happens when I click the
> button "Create PDF" after inserting Nomenclature entry and Nomenclature
> List.
> Should I do some procedure to
On Wed, Jan 13, 2010 at 9:28 AM, Enrico Guastaldi
enrico.guasta...@gmail.com wrote:
Dear list member,
I'm a new Lyx 1.6.4 user under Linux (Kubuntu 9.10), and I think Lyx is
amazing!
I'm writing a tech book and I need to some hint concerning to final Index
and others about Nomenclature.
When
On Wed, Jan 13, 2010 at 9:28 AM, Enrico Guastaldi
enrico.guasta...@gmail.com wrote:
Dear list member,
I'm a new Lyx 1.6.4 user under Linux (Kubuntu 9.10), and I think Lyx is
amazing!
I'm writing a tech book and I need to some hint concerning to final Index
and others about Nomenclature.
When
On Wed, Jan 13, 2010 at 9:28 AM, Enrico Guastaldi
wrote:
> Dear list member,
> I'm a new Lyx 1.6.4 user under Linux (Kubuntu 9.10), and I think Lyx is
> amazing!
> I'm writing a tech book and I need to some hint concerning to final Index
> and others about
Is it possible to create a definition list in LyX where the definition
term or thing being defined is for more than one word without
resorting to ERT?
In LaTeX this would be something like
\begin{description}
\item[OneWord] First item
\item[Two words] Second item
\end{description}
I can do
On Thu, Jan 7, 2010 at 1:05 PM, Guenter Milde mi...@users.berlios.de wrote:
On 2010-01-07, stephen's mailinglist account wrote:
Is it possible to create a definition list in LyX where the definition
term or thing being defined is for more than one word without
resorting to ERT?
I can do
Is it possible to create a definition list in LyX where the definition
term or thing being defined is for more than one word without
resorting to ERT?
In LaTeX this would be something like
\begin{description}
\item[OneWord] First item
\item[Two words] Second item
\end{description}
I can do
On Thu, Jan 7, 2010 at 1:05 PM, Guenter Milde mi...@users.berlios.de wrote:
On 2010-01-07, stephen's mailinglist account wrote:
Is it possible to create a definition list in LyX where the definition
term or thing being defined is for more than one word without
resorting to ERT?
I can do
Is it possible to create a definition list in LyX where the definition
term or thing being defined is for more than one word without
resorting to ERT?
In LaTeX this would be something like
\begin{description}
\item[OneWord] First item
\item[Two words] Second item
\end{description}
I can do
On Thu, Jan 7, 2010 at 1:05 PM, Guenter Milde <mi...@users.berlios.de> wrote:
> On 2010-01-07, stephen's mailinglist account wrote:
>> Is it possible to create a definition list in LyX where the definition
>> term or thing being defined is for more than one word without
>&g
On Mon, Dec 7, 2009 at 10:18 PM, Graham M Smith
graham.sm...@myotis.co.ukwrote:
I have a bibtex file created in Jabref
The entry in the author field is {R Development Core Team} but Lyx is
citing it as Team (2009).
As I understand it, the curly brackets around the name should stop the
On Mon, Dec 7, 2009 at 10:18 PM, Graham M Smith
graham.sm...@myotis.co.ukwrote:
I have a bibtex file created in Jabref
The entry in the author field is {R Development Core Team} but Lyx is
citing it as Team (2009).
As I understand it, the curly brackets around the name should stop the
On Mon, Dec 7, 2009 at 10:18 PM, Graham M Smith
wrote:
> I have a bibtex file created in Jabref
>
> The entry in the author field is {R Development Core Team} but Lyx is
> citing it as Team (2009).
>
> As I understand it, the curly brackets around the name should stop
On Sat, Nov 28, 2009 at 10:33 AM, Matthias Schmidt gm_schm...@yahoo.dewrote:
Hello,
I want to use Lyx from an usb-stick.
MiKTeX I found as a portable version on
http://www.miktex.org/portable/ .
ImageMagick ist availlable as a zip-file on
http://image_magick.veidrodis.com/image_magick/.
On Sat, Nov 28, 2009 at 10:33 AM, Matthias Schmidt gm_schm...@yahoo.dewrote:
Hello,
I want to use Lyx from an usb-stick.
MiKTeX I found as a portable version on
http://www.miktex.org/portable/ .
ImageMagick ist availlable as a zip-file on
http://image_magick.veidrodis.com/image_magick/.
On Sat, Nov 28, 2009 at 10:33 AM, Matthias Schmidt wrote:
> Hello,
>
> I want to use Lyx from an usb-stick.
>
> MiKTeX I found as a portable version on
> http://www.miktex.org/portable/ .
> ImageMagick ist availlable as a zip-file on
>
, but it's not that easy for beginners... :)
--
*Von:* stephen's mailinglist account
stephen4mailingli...@googlemail.com
*Gesendet:* 23.11.09 07:37:35
*An:* Christian Hemmer
*CC:* lyx-users@lists.lyx.org
*Betreff:* Re: Making TOC page 1
On Sun, Nov 22, 2009 at 9:39
, but it's not that easy for beginners... :)
--
*Von:* stephen's mailinglist account
stephen4mailingli...@googlemail.com
*Gesendet:* 23.11.09 07:37:35
*An:* Christian Hemmer
*CC:* lyx-users@lists.lyx.org
*Betreff:* Re: Making TOC page 1
On Sun, Nov 22, 2009 at 9:39
much for your help. I really want to get my thesis started
> in lyx, but it's not that easy for beginners... :)
> ------
> *Von:* "stephen's mailinglist account" <
> stephen4mailingli...@googlemail.com>
> *Gesendet:* 23.11.09 07:37:35
> *An:
On Sun, Nov 22, 2009 at 9:39 PM, Christian Hemmer
christian.hem...@web.dewrote:
Hey,
I would like my pagecounting beginning at the TOC, so that the document
starts with the roman numbers (I, II, III, ...) but as soon as it reaches
the TOC it should start with the latin ones (1, 2, 3, 4, ...).
On Sun, Nov 22, 2009 at 9:39 PM, Christian Hemmer
christian.hem...@web.dewrote:
Hey,
I would like my pagecounting beginning at the TOC, so that the document
starts with the roman numbers (I, II, III, ...) but as soon as it reaches
the TOC it should start with the latin ones (1, 2, 3, 4, ...).
On Sun, Nov 22, 2009 at 9:39 PM, Christian Hemmer
wrote:
> Hey,
> I would like my pagecounting beginning at the TOC, so that the document
> starts with the roman numbers (I, II, III, ...) but as soon as it reaches
> the TOC it should start with the latin ones (1, 2, 3, 4,
201 - 252 of 252 matches
Mail list logo