Re: 1.3.6 Won't Build on Slackware-10.1

[Georg Baum]

Rich Shepard wrote:

I've not before had a problem building lyx. The config.log is attached
 (gzipped). Make failed after 15.5 minutes when I did not specify the qt
 directories; now that I've specified them, it fails in 8 seconds:

I found nothing pertinent searching the gmane archive. Is this a STL
issue?

No, but the gmane search function seems to be not so powerful:
http://www.mail-archive.com/lyx-users%40lists.lyx.org/msg40655.html

 Patrick doesn't provide STL in Slackware and that's bitten me a couple of
 times recently.

Then he must provide a really old version of gcc (2.7 or something like
that) or a modified one (the STL is shipped as part of gcc since years). I
doubt that. Why would one want to do that?


Georg

Re: 1.3.6 Won't Build on Slackware-10.1

[Rich Shepard]

On Mon, 1 Aug 2005, Georg Baum wrote:


   I found nothing pertinent searching the gmane archive. Is this a STL
   issue?


No, but the gmane search function seems to be not so powerful:
http://www.mail-archive.com/lyx-users%40lists.lyx.org/msg40655.html


Georg,

  I _thought_ that I had recently read something on the list about this, but
I had not saved it and could not find it. Thank you very much.


Then he must provide a really old version of gcc (2.7 or something like
that) or a modified one (the STL is shipped as part of gcc since years). I
doubt that. Why would one want to do that?


  Well, gcc-3.3.4 is installed. I was told by developers of an application
that refused to build that it was a lack of stl that was the problem. I do C
and now Python so I just took them at their word.

  I'm off to build a working LyX-1.3.6.

Thank you very much,

Rich

--
Dr. Richard B. Shepard, President |  Author of Quantifying Environmental
Applied Ecosystem Services, Inc. (TM) |  Impact Assessments Using Fuzzy Logic
http://www.appl-ecosys.com   Voice: 503-667-4517   Fax: 503-667-8863

Re: 1.3.6 Won't Build on Slackware-10.1

[Georg Baum]

Rich Shepard wrote:

I've not before had a problem building lyx. The config.log is attached
 (gzipped). Make failed after 15.5 minutes when I did not specify the qt
 directories; now that I've specified them, it fails in 8 seconds:

I found nothing pertinent searching the gmane archive. Is this a STL
issue?

No, but the gmane search function seems to be not so powerful:
http://www.mail-archive.com/lyx-users%40lists.lyx.org/msg40655.html

 Patrick doesn't provide STL in Slackware and that's bitten me a couple of
 times recently.

Then he must provide a really old version of gcc (2.7 or something like
that) or a modified one (the STL is shipped as part of gcc since years). I
doubt that. Why would one want to do that?


Georg

Re: 1.3.6 Won't Build on Slackware-10.1

[Rich Shepard]

On Mon, 1 Aug 2005, Georg Baum wrote:


   I found nothing pertinent searching the gmane archive. Is this a STL
   issue?


No, but the gmane search function seems to be not so powerful:
http://www.mail-archive.com/lyx-users%40lists.lyx.org/msg40655.html


Georg,

  I _thought_ that I had recently read something on the list about this, but
I had not saved it and could not find it. Thank you very much.


Then he must provide a really old version of gcc (2.7 or something like
that) or a modified one (the STL is shipped as part of gcc since years). I
doubt that. Why would one want to do that?


  Well, gcc-3.3.4 is installed. I was told by developers of an application
that refused to build that it was a lack of stl that was the problem. I do C
and now Python so I just took them at their word.

  I'm off to build a working LyX-1.3.6.

Thank you very much,

Rich

--
Dr. Richard B. Shepard, President |  Author of Quantifying Environmental
Applied Ecosystem Services, Inc. (TM) |  Impact Assessments Using Fuzzy Logic
http://www.appl-ecosys.com   Voice: 503-667-4517   Fax: 503-667-8863

Re: 1.3.6 Won't Build on Slackware-10.1

[Georg Baum]

Rich Shepard wrote:

>I've not before had a problem building lyx. The config.log is attached
> (gzipped). Make failed after 15.5 minutes when I did not specify the qt
> directories; now that I've specified them, it fails in 8 seconds:

>I found nothing pertinent searching the gmane archive. Is this a STL
>issue?

No, but the gmane search function seems to be not so powerful:
http://www.mail-archive.com/lyx-users%40lists.lyx.org/msg40655.html

> Patrick doesn't provide STL in Slackware and that's bitten me a couple of
> times recently.

Then he must provide a really old version of gcc (2.7 or something like
that) or a modified one (the STL is shipped as part of gcc since years). I
doubt that. Why would one want to do that?


Georg

Re: 1.3.6 Won't Build on Slackware-10.1

[Rich Shepard]

On Mon, 1 Aug 2005, Georg Baum wrote:


   I found nothing pertinent searching the gmane archive. Is this a STL
   issue?


No, but the gmane search function seems to be not so powerful:
http://www.mail-archive.com/lyx-users%40lists.lyx.org/msg40655.html


Georg,

  I _thought_ that I had recently read something on the list about this, but
I had not saved it and could not find it. Thank you very much.


Then he must provide a really old version of gcc (2.7 or something like
that) or a modified one (the STL is shipped as part of gcc since years). I
doubt that. Why would one want to do that?


  Well, gcc-3.3.4 is installed. I was told by developers of an application
that refused to build that it was a lack of stl that was the problem. I do C
and now Python so I just took them at their word.

  I'm off to build a working LyX-1.3.6.

Thank you very much,

Rich

--
Dr. Richard B. Shepard, President |  Author of "Quantifying Environmental
Applied Ecosystem Services, Inc. (TM) |  Impact Assessments Using Fuzzy Logic"
   Voice: 503-667-4517   Fax: 503-667-8863

1.3.6 Won't Build on Slackware-10.1

[Rich Shepard]

  I've not before had a problem building lyx. The config.log is attached
(gzipped). Make failed after 15.5 minutes when I did not specify the qt
directories; now that I've specified them, it fails in 8 seconds:

g++ -DHAVE_CONFIG_H -I. -I. -I../../../src -I../../../src
-I../../../src/frontends -I../../../images -I./qt2
-I/usr/lib/qt-3.3.3/include -I../../../boost
-I../../../src/frontends/controllers -DQT_CLEAN_NAMESPACE -DQT_GENUINE_STR
-DQT_THREAD_SUPPORT -O -MT QPrefs.lo -MD -MP -MF .deps/QPrefs.Tpo -c QPrefs.C
QPrefs.C: In function oid unnamed::setComboxFont(QComboBox*, const
   std::string, const std::string, QFont::StyleHint)':
QPrefs.C:350: error: no match for 'operator==' in 'QComboBox::text(int)
   const(i) == default_font_name'
../../../src/lyxlength.h:85: error: candidates are: bool operator==(const
   LyXLength, const LyXLength)
../../../src/lyxgluelength.h:67: error: bool operator==(const
   LyXGlueLength, const LyXGlueLength)
../../../src/Spacing.h:76: error: bool operator==(const
   Spacing, const Spacing)
../../../src/Bullet.h:48: error: bool operator==(const
Bullet,
   const Bullet)
../../../src/lyxfont.h:438: error: bool operator==(const
   LyXFont, const LyXFont)
../../../src/lyxfont.h:427: error: bool operator==(const
   LyXFont::FontBits, const LyXFont::FontBits)
/usr/lib/qt/include/qcstring.h:299: error: bool
   operator==(const QCString, const QCString)

and it goes on from there.

  I found nothing pertinent searching the gmane archive. Is this a STL issue?
Patrick doesn't provide STL in Slackware and that's bitten me a couple of
times recently.

  In the meantime, I trashed the 1.3.5 installation by trying to use the
Slackware-1.3.6 package on linuxpackages.net. Unfortunately, that was built
using the aiksaurus library and I don't have that installed here. Check mate.

  Ideas, suggestions, solutions will be appreciated.

TIA,

Rich

--
Dr. Richard B. Shepard, President |  Author of Quantifying Environmental
Applied Ecosystem Services, Inc. (TM) |  Impact Assessments Using Fuzzy Logic
http://www.appl-ecosys.com   Voice: 503-667-4517   Fax: 503-667-8863

config.log.gz
Description: GNU Zip compressed data

1.3.6 Won't Build on Slackware-10.1

[Rich Shepard]

  I've not before had a problem building lyx. The config.log is attached
(gzipped). Make failed after 15.5 minutes when I did not specify the qt
directories; now that I've specified them, it fails in 8 seconds:

g++ -DHAVE_CONFIG_H -I. -I. -I../../../src -I../../../src
-I../../../src/frontends -I../../../images -I./qt2
-I/usr/lib/qt-3.3.3/include -I../../../boost
-I../../../src/frontends/controllers -DQT_CLEAN_NAMESPACE -DQT_GENUINE_STR
-DQT_THREAD_SUPPORT -O -MT QPrefs.lo -MD -MP -MF .deps/QPrefs.Tpo -c QPrefs.C
QPrefs.C: In function oid unnamed::setComboxFont(QComboBox*, const
   std::string, const std::string, QFont::StyleHint)':
QPrefs.C:350: error: no match for 'operator==' in 'QComboBox::text(int)
   const(i) == default_font_name'
../../../src/lyxlength.h:85: error: candidates are: bool operator==(const
   LyXLength, const LyXLength)
../../../src/lyxgluelength.h:67: error: bool operator==(const
   LyXGlueLength, const LyXGlueLength)
../../../src/Spacing.h:76: error: bool operator==(const
   Spacing, const Spacing)
../../../src/Bullet.h:48: error: bool operator==(const
Bullet,
   const Bullet)
../../../src/lyxfont.h:438: error: bool operator==(const
   LyXFont, const LyXFont)
../../../src/lyxfont.h:427: error: bool operator==(const
   LyXFont::FontBits, const LyXFont::FontBits)
/usr/lib/qt/include/qcstring.h:299: error: bool
   operator==(const QCString, const QCString)

and it goes on from there.

  I found nothing pertinent searching the gmane archive. Is this a STL issue?
Patrick doesn't provide STL in Slackware and that's bitten me a couple of
times recently.

  In the meantime, I trashed the 1.3.5 installation by trying to use the
Slackware-1.3.6 package on linuxpackages.net. Unfortunately, that was built
using the aiksaurus library and I don't have that installed here. Check mate.

  Ideas, suggestions, solutions will be appreciated.

TIA,

Rich

--
Dr. Richard B. Shepard, President |  Author of Quantifying Environmental
Applied Ecosystem Services, Inc. (TM) |  Impact Assessments Using Fuzzy Logic
http://www.appl-ecosys.com   Voice: 503-667-4517   Fax: 503-667-8863

config.log.gz
Description: GNU Zip compressed data

1.3.6 Won't Build on Slackware-10.1

[Rich Shepard]

  I've not before had a problem building lyx. The config.log is attached
(gzipped). Make failed after 15.5 minutes when I did not specify the qt
directories; now that I've specified them, it fails in 8 seconds:

g++ -DHAVE_CONFIG_H -I. -I. -I../../../src -I../../../src
-I../../../src/frontends -I../../../images -I./qt2
-I/usr/lib/qt-3.3.3/include -I../../../boost
-I../../../src/frontends/controllers -DQT_CLEAN_NAMESPACE -DQT_GENUINE_STR
-DQT_THREAD_SUPPORT -O -MT QPrefs.lo -MD -MP -MF .deps/QPrefs.Tpo -c QPrefs.C
QPrefs.C: In function oid ::setComboxFont(QComboBox*, const
   std::string&, const std::string&, QFont::StyleHint)':
QPrefs.C:350: error: no match for 'operator==' in 'QComboBox::text(int)
   const(i) == default_font_name'
../../../src/lyxlength.h:85: error: candidates are: bool operator==(const
   LyXLength&, const LyXLength&)
../../../src/lyxgluelength.h:67: error: bool operator==(const
   LyXGlueLength&, const LyXGlueLength&)
../../../src/Spacing.h:76: error: bool operator==(const
   Spacing&, const Spacing&)
../../../src/Bullet.h:48: error: bool operator==(const
Bullet&,
   const Bullet&)
../../../src/lyxfont.h:438: error: bool operator==(const
   LyXFont&, const LyXFont&)
../../../src/lyxfont.h:427: error: bool operator==(const
   LyXFont::FontBits&, const LyXFont::FontBits&)
/usr/lib/qt/include/qcstring.h:299: error: bool
   operator==(const QCString&, const QCString&)

and it goes on from there.

  I found nothing pertinent searching the gmane archive. Is this a STL issue?
Patrick doesn't provide STL in Slackware and that's bitten me a couple of
times recently.

  In the meantime, I trashed the 1.3.5 installation by trying to use the
Slackware-1.3.6 package on linuxpackages.net. Unfortunately, that was built
using the aiksaurus library and I don't have that installed here. Check mate.

  Ideas, suggestions, solutions will be appreciated.

TIA,

Rich

--
Dr. Richard B. Shepard, President |  Author of "Quantifying Environmental
Applied Ecosystem Services, Inc. (TM) |  Impact Assessments Using Fuzzy Logic"
   Voice: 503-667-4517   Fax: 503-667-8863

config.log.gz
Description: GNU Zip compressed data