Re: Fwd: PDF Page Size

2021-10-22 Thread Dr Eberhard W Lisse
Even cooler, thanks more :-)-O el On 2021-10-19 19:03 , Jack Lyon wrote: > Greetings, all. > > I'm the creator of LyXBook, and I'd be happy to answer any questions > you may have about it. > > When I first created the LyXBook layouts, I licensed some of them > based on the purchase of my

Re: Fwd: PDF Page Size

2021-10-22 Thread Dr Eberhard W Lisse
Cool, thanks, el On 2021-10-19 18:29 , Ken Kopelson wrote: If anyone has information about LyXBook, here is where I found out about it: LyX wiki | Layouts / Layouts So, the official LyX wiki shows quite a few options when it comes to layouts.  Under

Re: Fwd: PDF Page Size

2021-10-20 Thread Daniel
On 19/10/2021 16:11, Dr Eberhard Lisse wrote: If you were to look into the Emoji Handbook you'd find that I am credited with the stethoscope (25 years or so ago). The arrows are just pointing... el Thanks. For now, I am going to stick to my emotionally poor triad :), :(, and ;). Daniel

Re: Fwd: PDF Page Size

2021-10-19 Thread Jack Lyon
Thanks for the feedback, Ken. I'll see if I can remedy the problem. You can get around it by including something like the following under Document > Settings > Preamble: \setstocksize{8.5in}{5.5in} And, as Daniel pointed out, the layouts depend on the Memoir class, so you can use other

Re: Fwd: PDF Page Size

2021-10-19 Thread Ken Kopelson
I have found your LyXBook layouts to be very good, and I very much appreciate the work you did on them. The one issue I had, which was addressed here by Daniel, is the way it didn't respond to changes in the page size using the standard page size settings... when using the MiKTek system. Best

Re: Fwd: PDF Page Size

2021-10-19 Thread Jack Lyon
Greetings, all. I'm the creator of LyXBook, and I'd be happy to answer any questions you may have about it. When I first created the LyXBook layouts, I licensed some of them based on the purchase of my Microsoft Word add-in LyXConverter, which converts Word documents into LyX documents:

Re: Fwd: PDF Page Size

2021-10-19 Thread Ken Kopelson
If anyone has information about LyXBook, here is where I found out about it: LyX wiki | Layouts / Layouts So, the official LyX wiki shows quite a few options when it comes to layouts. Under the section on "book" layouts, you will find this entry: -

Re: Fwd: PDF Page Size

2021-10-19 Thread Dr Eberhard Lisse
If you were to look into the Emoji Handbook you'd find that I am credited with the stethoscope (25 years or so ago). The arrows are just pointing... el On 19/10/2021 13:56, Daniel wrote: On 18/10/2021 01:12, Dr Eberhard Lisse wrote: --> :-)-O <-- stands for I was joking Never came across

Re: Fwd: PDF Page Size

2021-10-19 Thread Daniel
On 18/10/2021 01:12, Dr Eberhard Lisse wrote: --> :-)-O <-- stands for I was joking Never came across that emoji before. What is it supposed to picture? The more common, ;-) works quite well in this case too, I think. Daniel -- lyx-users mailing list lyx-users@lists.lyx.org

Re: Fwd: PDF Page Size

2021-10-19 Thread Daniel
On 18/10/2021 01:12, Dr Eberhard Lisse wrote: On 2021-10-15 16:38 , Daniel wrote: On 15/10/2021 13:07, Dr Eberhard Lisse wrote: On 15/10/2021 07:57, Ken Kopelson wrote: [...] What is the LyXBook class?  Or if it refers to the layout, where did you get it from? What is the LyXBook class?

Re: Fwd: PDF Page Size

2021-10-17 Thread Dr Eberhard Lisse
On 2021-10-15 16:38 , Daniel wrote: On 15/10/2021 13:07, Dr Eberhard Lisse wrote: On 15/10/2021 07:57, Ken Kopelson wrote: [...] What is the LyXBook class? Or if it refers to the layout, where did you get it from? What is the LyXBook class? I find Koma Script much better and easier

Re: Fwd: PDF Page Size

2021-10-17 Thread Dr Eberhard Lisse
Ken, --> :-)-O <-- stands for I was joking If it works for you it works for you. However I am not sure that for LyX and LaTeX 64GB RAM makes that much difference, and we see many queries here caused by the MikReX setup. I run the latexbench on all machines I can lay my hands on and after

Re: Fwd: PDF Page Size

2021-10-15 Thread Ken Kopelson
ave switched > some years ago. That may be opinion, but try it out :-)-O > > el > > > > On 15/10/2021 07:57, Ken Kopelson wrote: > > FYI > > -- Forwarded message ----- > > From: *Ken Kopelson* mailto:kenb...@gmail.com>> > > Date: Thu, Oc

Re: Fwd: PDF Page Size

2021-10-15 Thread Daniel
On 15/10/2021 13:07, Dr Eberhard Lisse wrote: On 15/10/2021 07:57, Ken Kopelson wrote: FYI -- Forwarded message - From: *Ken Kopelson* mailto:kenb...@gmail.com>> Date: Thu, Oct 14, 2021 at 10:55 PM Subject: Re: PDF Page Size To: racoon mailto:xraco...@gmx.de>>

Re: Fwd: PDF Page Size

2021-10-15 Thread Dr Eberhard Lisse
Thu, Oct 14, 2021 at 10:55 PM Subject: Re: PDF Page Size To: racoon mailto:xraco...@gmx.de>> Thank you SO MUCH Daniel! Your suggestion fixed the problem for me, and it works beautifully now! Many thanks again, *Ken Kopelson* On Thu, Oct 14, 2021 at 12:20 PM racoon mailto:xraco...

Fwd: PDF Page Size

2021-10-14 Thread Ken Kopelson
FYI -- Forwarded message - From: Ken Kopelson Date: Thu, Oct 14, 2021 at 10:55 PM Subject: Re: PDF Page Size To: racoon Thank you SO MUCH Daniel! Your suggestion fixed the problem for me, and it works beautifully now! Many thanks again, *Ken Kopelson* On Thu, Oct 14, 2021

Re: PDF Page Size

2021-10-14 Thread Daniel
, and on Windows.  It is the Windows version that fails to do the right thing. When I set a page size using the MacOS LyX, (using the document->settings->Page Layout) to something like 9 inches height x 6 inches width, and then export the document to PDF, it produces a do

PDF Page Size

2021-10-13 Thread Ken Kopelson
that fails to do the right thing. When I set a page size using the MacOS LyX, (using the document->settings->Page Layout) to something like 9 inches height x 6 inches width, and then export the document to PDF, it produces a document that is the dimensions I requested, and all PDF viewer

Re: Using chrome as pdf viewer

2021-09-22 Thread Scott Kostyshak
to use the view button, which opens a window with > evince as viewer (or okular will also work). Then to present from > chrome, I will have a choice on X11 of sharing screen, a window, or a > chrome tab. I would normally choose to share the pdf viewer window. > > This doesn't wo

Using chrome as pdf viewer

2021-09-22 Thread Neal Becker
). Then to present from chrome, I will have a choice on X11 of sharing screen, a window, or a chrome tab. I would normally choose to share the pdf viewer window. This doesn't work on wayland. Running chrome on wayland shows no windows to share. But a thought is sharing a chrome tab might work

Re: Command to put string in both the LyX authoring environment and the finished PDF?

2021-06-22 Thread Steve Litt
Richard Kimberly Heck said on Tue, 22 Jun 2021 11:16:56 -0400 >> >> I changed the [0] number of arguments in the LaTeX command to [1] in >> order to consume the argument. Once I did that, whatever I put in the >> character style does not show up in the PDF. > >T

Re: Command to put string in both the LyX authoring environment and the finished PDF?

2021-06-22 Thread Richard Kimberly Heck
> to have to search all instances of that title and replace them every >> time I get a better idea for the title. >> >> S, what I want to do is put something in my local layout to >> articulate the title, both in the LyX authoring environment and in the >> compi

Re: Command to put string in both the LyX authoring environment and the finished PDF?

2021-06-22 Thread Steve Litt
ime I get a better idea for the title. > >S, what I want to do is put something in my local layout to >articulate the title, both in the LyX authoring environment and in the >compiled PDF, showing the title in a specific appearance. I tried to do >it

Re: Command to put string in both the LyX authoring environment and the finished PDF?

2021-06-21 Thread Dr Eberhard Lisse
On 2021-06-21 01:44 , Paul A. Rubin wrote: On 6/20/21 5:39 PM, Steve Litt wrote: Hi all, I have a local layout, based on Book-extsizes, for my new book. I have no idea what the book's title will be yet, and I sure nuff don't want to have to search all instances of that title and replace them

Re: Command to put string in both the LyX authoring environment and the finished PDF?

2021-06-21 Thread Andrew Parsloe
for the title. S, what I want to do is put something in my local layout to articulate the title, both in the LyX authoring environment and in the compiled PDF, showing the title in a specific appearance. I tried to do it as a character style, as follows

Re: Command to put string in both the LyX authoring environment and the finished PDF?

2021-06-20 Thread Paul A. Rubin
. S, what I want to do is put something in my local layout to articulate the title, both in the LyX authoring environment and in the compiled PDF, showing the title in a specific appearance. I tried to do it as a character style, as follows

Command to put string in both the LyX authoring environment and the finished PDF?

2021-06-20 Thread Steve Litt
something in my local layout to articulate the title, both in the LyX authoring environment and in the compiled PDF, showing the title in a specific appearance. I tried to do it as a character style, as follows: \definecolor

Re: Converting markdown to PDF

2021-06-17 Thread Steve Litt
Dr Eberhard Lisse said on Thu, 17 Jun 2021 13:03:39 +0200 >I wrote a 15 line template file, Could you please post the template file, as well as the exact command you used to implement the template file for conversion? Thanks, SteveT Steve Litt Spring 2021 featured book: Troubleshooting

Re: Converting markdown to PDF

2021-06-17 Thread Steve Litt
Jean-Marc Lasgouttes said on Thu, 17 Jun 2021 10:24:06 +0200 >Le 17/06/2021 à 03:24, Steve Litt a écrit : >> What we need, and we've needed for over a decade is a real, style for >> style, syntactically complete HTML export, or lacking that, finally >> finish the job, started a decade ago, of

Re: Converting markdown to PDF

2021-06-17 Thread Dr Eberhard Lisse
written template for pandoc) I can generate TeX which more or less translates flawlessly into LyX. greetings, el On 17/06/2021 03:24, Steve Litt wrote: [...] What might be more interesting is a Markdown *import*. LyX, equipped with a Markdown layout file, could easily print Markdown to pdf, or use

Re: Converting markdown to PDF

2021-06-17 Thread Dr Eberhard Lisse
I was going to write What we need in the first instance is to to be able to generate flowing formats (ePub and similar). pandoc seems to be able to do that from DocBook, so tying this to a LyX "Converter" should be possible, but otherwise a Makefile will

Re: Converting markdown to PDF

2021-06-17 Thread Dr Eberhard Lisse
RStudio, open the .md file and click the "Knit to PDF" toolbar button and you're done (unless you don't like the way the PDF turned out). In my case, it would save having to look up the command syntax. Paul -- To email me replace 'nospam' with 'el' -- lyx-users mailing list

Re: Converting markdown to PDF

2021-06-17 Thread Jean-Marc Lasgouttes
Le 17/06/2021 à 03:24, Steve Litt a écrit : What we need, and we've needed for over a decade is a real, style for style, syntactically complete HTML export, or lacking that, finally finish the job, started a decade ago, of making LyX' native language format valid and well formed XML. Do that and

Re: Converting markdown to PDF

2021-06-16 Thread Jack Lyon
for users of the RStudio IDE, you just open RStudio, open the .md file and click the "Knit to PDF" toolbar button and you're done (unless you don't like the way the PDF turned out). In my case, it would save having to look up the command syntax. I believe that a much needed development avenue

Re: Converting markdown to PDF

2021-06-16 Thread Steve Litt
t open >> RStudio, open the .md file and click the "Knit to PDF" toolbar button >> and you're done (unless you don't like the way the PDF turned out). >> In my case, it would save having to look up the command syntax. > >I believe that a much needed developme

Re: Converting markdown to PDF

2021-06-16 Thread Paul Smith
On Wed, Jun 16, 2021 at 9:48 PM Paul A. Rubin wrote: > > > Using R is a little overkill in my view, but if it works it works :-)-O > It's a bit indirect, but for users of the RStudio IDE, you just open > RStudio, open the .md file and click the "Knit to PDF" toolbar

Re: Converting markdown to PDF

2021-06-16 Thread Paul A. Rubin
On 6/16/21 4:12 PM, Dr Eberhard Lisse wrote: Using R is a little overkill in my view, but if it works it works :-)-O It's a bit indirect, but for users of the RStudio IDE, you just open RStudio, open the .md file and click the "Knit to PDF" toolbar button and you're done (unless

Re: Converting markdown to PDF

2021-06-16 Thread Dr Eberhard Lisse
Pandoc does Markdown to LaTeX (to PDF) just fine. I use something like pandoc --wrap=none -f markdown-auto_identifiers \ -t latex --template=/Users/el/pantemplates/mytemplate.tex \ filename.markdown > filename.tex where I took one of the LaTeX templa

Re: Converting markdown to PDF

2021-06-16 Thread Rich Shepard
On Wed, 16 Jun 2021, Paul Smith wrote: You can use R for that, Rich. Just open your .md file in R and preview it in PDF. I have just tested this approach and it works. Paul, How interesting! Thanks for the insight. Regards, Rich -- lyx-users mailing list lyx-users@lists.lyx.org http

Re: Converting markdown to PDF

2021-06-16 Thread Paul Smith
On Wed, Jun 16, 2021 at 5:27 PM Rich Shepard wrote: > > I've an .md file that I want to convert to .pdf. Using pandoc I get a .pdf > that's all in html. Can lyx help me convert the .md to a clean text (with > code) .pdf? You can use R for that, Rich. Just open your .md file in R

Converting markdown to PDF

2021-06-16 Thread Rich Shepard
I've an .md file that I want to convert to .pdf. Using pandoc I get a .pdf that's all in html. Can lyx help me convert the .md to a clean text (with code) .pdf? Rich -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users

Bibliography occurs twice in pdf output

2021-04-12 Thread Wolfgang Engelmann
I have a normal Bibliography setting in my Koma script book which is correctly shown as such in the pdf output. I have additionally a Recommended literature in the book with a few references which refers to Section 4 of my Appendix as Recommended literature. Strangely, this Recommended

Re: error in converting pdf formatted figure

2021-03-30 Thread Wolfgang Engelmann
Am 30.03.21 um 18:06 schrieb Wolfgang Engelmann: Am 30.03.21 um 17:20 schrieb Yu Jin: Am Di., 30. März 2021 um 11:50 Uhr schrieb Wolfgang Engelmann mailto:engelm...@uni-tuebingen.de>>:     A colleague of mine is not able to see a graphic in a float figure, if     it is in pdf

Re: error in converting pdf formatted figure

2021-03-30 Thread Wolfgang Engelmann
Am 30.03.21 um 17:20 schrieb Yu Jin: Am Di., 30. März 2021 um 11:50 Uhr schrieb Wolfgang Engelmann mailto:engelm...@uni-tuebingen.de>>: A colleague of mine is not able to see a graphic in a float figure, if it is in pdf or eps format. png works. The error message is

Re: error in converting pdf formatted figure

2021-03-30 Thread Doug Martin
On Tue, Mar 30, 2021 at 9:21 AM Yu Jin wrote: > Am Di., 30. März 2021 um 11:50 Uhr schrieb Wolfgang Engelmann < > engelm...@uni-tuebingen.de>: > >> A colleague of mine is not able to see a graphic in a float figure, if >> it is in pdf or eps format. png works. Th

Re: error in converting pdf formatted figure

2021-03-30 Thread Yu Jin
Am Di., 30. März 2021 um 11:50 Uhr schrieb Wolfgang Engelmann < engelm...@uni-tuebingen.de>: > A colleague of mine is not able to see a graphic in a float figure, if > it is in pdf or eps format. png works. The error message is > error in converting (or something similar, he has

error in converting pdf formatted figure

2021-03-30 Thread Wolfgang Engelmann
A colleague of mine is not able to see a graphic in a float figure, if it is in pdf or eps format. png works. The error message is error in converting (or something similar, he has German setting). We have tried to compare my and his settings in the document and tools settings and did not find

Re: blurish pdf figure

2021-03-15 Thread Wolfgang Engelmann
blurish, although the original and in the pdf output it is clear. Looks like it is rendered to a pixel figure. What is wrong? Wolfgang With pyxplot (similar to gnuplot, but better): http://www.pyxplot.org.uk/ #Kidd_2015-model reset set multiplot set term pdf set width 6 set output './Kidd_2015

Re: blurish pdf figure

2021-03-15 Thread Dr Eberhard W Lisse
Maybe, maybe not. For me it has always worked very well. And for graphs it should should be ok. Perhaps try both. el On 2021-03-15 19:53 , Neal Becker wrote: Doesn't rsvg-covert output raster, which would be lower quality than inkscape vector output? [...] -- lyx-users mailing list

Re: blurish pdf figure

2021-03-15 Thread Neal Becker
Doesn't rsvg-covert output raster, which would be lower quality than inkscape vector output? On Mon, Mar 15, 2021, 1:44 PM Dr Eberhard W Lisse wrote: > That should read SVG of course. > > LyX finds rsvg-convert on the Mac when libsvg is installed, which > has a smaller footprint than inkscape

Re: blurish pdf figure

2021-03-15 Thread Dr Eberhard W Lisse
That should read SVG of course. LyX finds rsvg-convert on the Mac when libsvg is installed, which has a smaller footprint than inkscape and very good qualitywise. greetings, el On 2021-03-15 19:29 , Dr Eberhard W Lisse wrote: > Wolfgang, > > make it export SVGA and use that :-0-O > > el [...]

Re: blurish pdf figure

2021-03-15 Thread Dr Eberhard W Lisse
, it looks blurish, although the original and in the pdf output it is clear. Looks like it is rendered to a pixel figure. What is wrong? Wolfgang With pyxplot (similar to gnuplot, but better): http://www.pyxplot.org.uk/ #Kidd_2015-model reset set multiplot set term pdf set width 6 set output

Re: blurish pdf figure

2021-03-15 Thread Paul A. Rubin
On 3/15/21 6:31 AM, Wolfgang Engelmann wrote: Am 15.03.21 um 10:38 schrieb Dr Eberhard Lisse: Wolfgang, how is this produced? el On 12/03/2021 12:01, Wolfgang Engelmann wrote: If I insert the graphic (appended) in a lyx document, it looks blurish, although the original and in the pdf

Re: blurish pdf figure

2021-03-15 Thread Wolfgang Engelmann
Am 15.03.21 um 10:38 schrieb Dr Eberhard Lisse: Wolfgang, how is this produced? el On 12/03/2021 12:01, Wolfgang Engelmann wrote: If I insert the graphic (appended) in a lyx document, it looks blurish, although the original and in the pdf output it is clear. Looks like it is rendered

Re: blurish pdf figure

2021-03-15 Thread Dr Eberhard Lisse
Wolfgang, how is this produced? el On 12/03/2021 12:01, Wolfgang Engelmann wrote: If I insert the graphic (appended) in a lyx document, it looks blurish, although the original and in the pdf output it is clear. Looks like it is rendered to a pixel figure. What is wrong? Wolfgang

Re: blurish pdf figure

2021-03-15 Thread Wolfgang Engelmann
Am 14.03.21 um 17:08 schrieb Paul A. Rubin: On 3/12/21 5:01 AM, Wolfgang Engelmann wrote: If I insert the graphic (appended) in a lyx document, it looks blurish, although the original and in the pdf output it is clear. Looks like it is rendered to a pixel figure. What is wrong? Wolfgang

Re: blurish pdf figure

2021-03-14 Thread Paul A. Rubin
On 3/12/21 5:01 AM, Wolfgang Engelmann wrote: If I insert the graphic (appended) in a lyx document, it looks blurish, although the original and in the pdf output it is clear. Looks like it is rendered to a pixel figure. What is wrong? Wolfgang Are you saying that it looks blurry in the LyX

blurish pdf figure

2021-03-12 Thread Wolfgang Engelmann
If I insert the graphic (appended) in a lyx document, it looks blurish, although the original and in the pdf output it is clear. Looks like it is rendered to a pixel figure. What is wrong? Wolfgang Kidd_2015-B.pdf Description: Adobe PDF document -- lyx-users mailing list lyx-users

Default new documents rendering as cropped PDF

2021-01-21 Thread list_email
Hi List, For some reason when I start a new generic document (File -> New) which is an Article (Standard Class), the PDF is rendered as cropped. The default rendering keyboard shortcut (Command-R on my Mac) shows Document -> View [PDF (cropped)] so it’s doing what it is being told when

Re: Default new documents rendering as cropped PDF

2021-01-21 Thread Paul A. Rubin
On 1/21/21 5:53 PM, list_em...@icloud.com wrote: Hi List, For some reason when I start a new generic document (File -> New) which is an Article (Standard Class), the PDF is rendered as cropped. The default rendering keyboard shortcut (Command-R on my Mac) shows Document -> View [PDF (c

reuse open pdf viewer

2020-12-02 Thread Neal Becker
When I use evince, each view re-uses the existing evince viewer instance. I'm experimenting with pympress, which seems really nice for beamer presentation. Each time I view the pdf, a new pympress window is created. How is it arranged that evince will reuse the existing window, and how might I

Re: Beamer presentation PDF resolution [RESOLVED]

2020-06-19 Thread Dr Eberhard Lisse
rather easy to produce a PDF in each supported aspect ration and then try every one on the beamer and use the one that looks best. This is great stuff! greetings, el On 2020-06-17 23:31 , Rich Shepard wrote: [...] > The beamer output is now in 16:9 aspect ratio, and the softwar I use > to d

Re: Beamer presentation PDF resolution [RESOLVED]

2020-06-17 Thread Giovanni
mercoledì 17 giugno 2020, 11:45, Rich Shepard: > On Wed, 17 Jun 2020, Giovanni wrote: > > > It should go in Class Options -> Custom > > Without quote, btw. > > In the source view it should be like this: > > \documentclass[italian,aspectratio=169]{beamer} > > Giovanni, > > I must have

Re: Beamer presentation PDF resolution

2020-06-17 Thread Giovanni
mercoledì 17 giugno 2020, 11:04, Rich Shepard: > On Wed, 17 Jun 2020, Giovanni wrote: > > > Use "aspectratio=169" in beamer options > > Giovanni, > > Where in the Settings should this go? It doesn't work in class > options -> Custom nor in Locay Layout (cannot be validated.) It should go

Re: Beamer presentation PDF resolution

2020-06-17 Thread Giovanni
or in-person presentations projected on a screen by > an lcd projector. > > However, videos for uploading to YouTube need to be in a 16:9 wide > screen ratio. How can I set the PDF output to a 16:9 ratio using > either 1920x1080 or 1280x720 resolution? > > TIA, > >

Re: Beamer presentation PDF resolution [RESOLVED]

2020-06-17 Thread Rich Shepard
as 1920x1080 or 1280x720 resolution files. The beamer output is now in 16:9 aspect ratio, and the softwar I use to display the PDF for the recorded video tutorials ('impressive') is scaled to open in a 860x540 dpi window, half the final resolution. I use ffmpeg to scale it up and it all works fine. Thanks

Re: Beamer presentation PDF resolution [RESOLVED]

2020-06-17 Thread Rich Shepard
On Wed, 17 Jun 2020, Giovanni wrote: It should go in Class Options -> Custom Without quote, btw. In the source view it should be like this: \documentclass[italian,aspectratio=169]{beamer} Giovanni, I must have mis-typed something the first time I tried it as a class option (of course no

Re: Beamer presentation PDF resolution

2020-06-17 Thread Rich Shepard
On Wed, 17 Jun 2020, Giovanni wrote: Use "aspectratio=169" in beamer options Giovanni, Where in the Settings should this go? It doesn't work in class options -> Custom nor in Locay Layout (cannot be validated.) Regards, Rich -- lyx-users mailing list lyx-users@lists.lyx.org

Re: Beamer presentation PDF resolution

2020-06-17 Thread Rich Shepard
On Wed, 17 Jun 2020, Giovanni wrote: Use "aspectratio=169" in beamer options HTH Giovanni, It certainly does help! Thanks very much. Stay well, Rich -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users

Re: Beamer presentation PDF resolution [RESOLVED]

2020-06-17 Thread Rich Shepard
On Wed, 17 Jun 2020, Rich Shepard wrote: However, videos for uploading to YouTube need to be in a 16:9 wide screen ratio. How can I set the PDF output to a 16:9 ratio using either 1920x1080 or 1280x720 resolution? I found the tool, now I need to learn the proper command line. Turns out

Beamer presentation PDF resolution

2020-06-17 Thread Rich Shepard
. However, videos for uploading to YouTube need to be in a 16:9 wide screen ratio. How can I set the PDF output to a 16:9 ratio using either 1920x1080 or 1280x720 resolution? TIA, Rich -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users

Re: lyx file from 2015 not converted to pdf

2020-03-25 Thread Wolfgang Engelmann
Am 24.03.20 um 20:24 schrieb Jean-Marc Lasgouttes: Le 24/03/2020 à 20:23, Wolfgang Engelmann a écrit : What does Help>About>Information on Compilation say? It should tell us what options where active when configuring LyX. LyX Version 2.3.4.2 (Friday, February 7, 2020) Library directory:

Re: lyx file from 2015 not converted to pdf

2020-03-24 Thread Jean-Marc Lasgouttes
Le 24/03/2020 à 20:23, Wolfgang Engelmann a écrit : What does Help>About>Information on Compilation say? It should tell us what options where active when configuring LyX. LyX Version 2.3.4.2 (Friday, February 7, 2020) Library directory: /usr/share/lyx/ User directory: ~/.lyx/ Qt Version

Re: lyx file from 2015 not converted to pdf

2020-03-24 Thread Wolfgang Engelmann
Am 24.03.20 um 19:59 schrieb Jean-Marc Lasgouttes: Le 24/03/2020 à 19:41, Wolfgang Engelmann a écrit : Am 24.03.20 um 19:29 schrieb Pavel Sanda: On Tue, Mar 24, 2020 at 07:21:27PM +0100, Wolfgang Engelmann wrote: LyX: Software exception Detected LyX has caught an exception, it will now

Re: lyx file from 2015 not converted to pdf

2020-03-24 Thread Jean-Marc Lasgouttes
Le 24/03/2020 à 19:41, Wolfgang Engelmann a écrit : Am 24.03.20 um 19:29 schrieb Pavel Sanda: On Tue, Mar 24, 2020 at 07:21:27PM +0100, Wolfgang Engelmann wrote: LyX: Software exception Detected LyX has caught an exception, it will now attempt to save all unsaved documents and exit.

Re: lyx file from 2015 not converted to pdf

2020-03-24 Thread Wolfgang Engelmann
Am 24.03.20 um 19:45 schrieb Pavel Sanda: On Tue, Mar 24, 2020 at 07:41:39PM +0100, Wolfgang Engelmann wrote: No, but you might have assertions enabled. what does assertion mean? These are special conditions in which we let lyx shutdown and should be enabled only by developers. If you

Re: lyx file from 2015 not converted to pdf

2020-03-24 Thread Pavel Sanda
On Tue, Mar 24, 2020 at 07:41:39PM +0100, Wolfgang Engelmann wrote: > > No, but you might have assertions enabled. > > what does assertion mean? These are special conditions in which we let lyx shutdown and should be enabled only by developers. If you use debian binaries, you should be safe and

Re: lyx file from 2015 not converted to pdf

2020-03-24 Thread Wolfgang Engelmann
Am 24.03.20 um 19:36 schrieb Jürgen Spitzmüller: Am Dienstag, den 24.03.2020, 19:28 +0100 schrieb Wolfgang Engelmann: Yes Jürgen, you are right. I unchecked literal and pdf output is ok. Can I uncheck all 'literal' in the various nomenclature inserts at once? Only if you open the LyX file

Re: lyx file from 2015 not converted to pdf

2020-03-24 Thread Wolfgang Engelmann
Am 24.03.20 um 19:29 schrieb Pavel Sanda: On Tue, Mar 24, 2020 at 07:21:27PM +0100, Wolfgang Engelmann wrote: LyX: Software exception Detected LyX has caught an exception, it will now attempt to save all unsaved documents and exit. Exception: std::exception Did I understand you correctly,

Re: lyx file from 2015 not converted to pdf

2020-03-24 Thread Jürgen Spitzmüller
Am Dienstag, den 24.03.2020, 19:28 +0100 schrieb Wolfgang Engelmann: > Yes Jürgen, you are right. I unchecked literal and pdf output is ok. > Can I uncheck all 'literal' in the various nomenclature inserts at > once? Only if you open the LyX file in a text editor. Search for lite

Re: lyx file from 2015 not converted to pdf

2020-03-24 Thread Pavel Sanda
On Tue, Mar 24, 2020 at 07:21:27PM +0100, Wolfgang Engelmann wrote: > LyX: Software exception Detected > LyX has caught an exception, it will now attempt to save all unsaved > documents and exit. > Exception: std::exception > > Did I understand you correctly, that you did not receive this

Re: lyx file from 2015 not converted to pdf

2020-03-24 Thread Wolfgang Engelmann
converted with Literal=true as this was the only possibility back then). "Literal" means that you can enter LaTeX code. Jürgen Yes Jürgen, you are right. I unchecked literal and pdf output is ok. Can I uncheck all 'literal' in the various nomenclature inserts at once? Wolfgang -- lyx-users ma

Re: lyx file from 2015 not converted to pdf

2020-03-24 Thread Pavel Sanda
On Tue, Mar 24, 2020 at 07:17:16PM +0100, Jürgen Spitzmüller wrote: > Can you file a report wrt this? #11797 P -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users

Re: lyx file from 2015 not converted to pdf

2020-03-24 Thread Wolfgang Engelmann
Am 24.03.20 um 19:21 schrieb Wolfgang Engelmann: Am 24.03.20 um 19:08 schrieb Pavel Sanda: On Fri, Mar 20, 2020 at 09:43:00AM +0100, Wolfgang Engelmann wrote: Thanks all for suggestions. The file did compile in 2015. I tried to remove parts of the original. It turned out that a

Re: lyx file from 2015 not converted to pdf

2020-03-24 Thread Wolfgang Engelmann
Am 24.03.20 um 19:08 schrieb Pavel Sanda: On Fri, Mar 20, 2020 at 09:43:00AM +0100, Wolfgang Engelmann wrote: Thanks all for suggestions. The file did compile in 2015. I tried to remove parts of the original. It turned out that a nomenclature lead to the error As we figured out in

Re: lyx file from 2015 not converted to pdf

2020-03-24 Thread Jürgen Spitzmüller
Am Dienstag, den 24.03.2020, 19:08 +0100 schrieb Pavel Sanda: > As we figured out in background, the problem is using ligature 'fl' > as one character instead of normally using two characters. Replacing > them fixes the problem. > > Attached is minimal example. > > I was not capable to have lyx

Re: lyx file from 2015 not converted to pdf

2020-03-24 Thread Pavel Sanda
On Fri, Mar 20, 2020 at 09:43:00AM +0100, Wolfgang Engelmann wrote: > Thanks all for suggestions. > The file did compile in 2015. > I tried to remove parts of the original. > It turned out that a nomenclature lead to the error As we figured out in background, the problem is using ligature 'fl' as

Re: How to size of pdf cropped output (Paul A. Rubin)

2020-03-23 Thread Fred Schenkelberg
thanks Paul I’ll give this a try and explore how to control sizing or resizing in the destination app - thanks for the tip Cheers, Fred -- lyx-users mailing list lyx-users@lists.lyx.org http://lists.lyx.org/mailman/listinfo/lyx-users

Re: lyx file from 2015 not converted to pdf

2020-03-22 Thread Guenter Milde
On 2020-03-20, Wolfgang Engelmann wrote: > Am 19.03.20 um 22:20 schrieb Guenter Milde: >> On 2020-03-19, Richard Kimberly Heck wrote: >>> On 3/19/20 12:20 PM, Paul A. Rubin wrote: >>>> On 3/19/20 12:03 PM, Wolfgang Engelmann wrote: >>>>> I am trying to

Re: How to size of pdf cropped output

2020-03-21 Thread Paul A. Rubin
On 3/17/20 6:45 PM, Fred Schenkelberg wrote: Hi - is there a way or best practice to control the size of exported (pdf cropped) equations such that they become a specific or at least consistent font height from one pdf to another? I’m trying to use LyX as an equation editor and embedding

Re: lyx file from 2015 not converted to pdf

2020-03-20 Thread Wolfgang Engelmann
Am 19.03.20 um 22:20 schrieb Guenter Milde: On 2020-03-19, Richard Kimberly Heck wrote: On 3/19/20 12:20 PM, Paul A. Rubin wrote: On 3/19/20 12:03 PM, Wolfgang Engelmann wrote: I am trying to export from a lyx file produced in 2015 a pdf file, but get this error: ... further errors

Re: lyx file from 2015 not converted to pdf

2020-03-19 Thread Guenter Milde
On 2020-03-19, Richard Kimberly Heck wrote: > On 3/19/20 12:20 PM, Paul A. Rubin wrote: >> On 3/19/20 12:03 PM, Wolfgang Engelmann wrote: >>> I am trying to export from a lyx file produced in 2015 a pdf file, >>> but get this error: ... >>> further errors: &

Re: lyx file from 2015 not converted to pdf

2020-03-19 Thread Richard Kimberly Heck
On 3/19/20 12:20 PM, Paul A. Rubin wrote: > On 3/19/20 12:03 PM, Wolfgang Engelmann wrote: >> I am trying to export from a lyx file produced in 2015 a pdf file, >> but get this error: >> >> Error: Softwareausnahme erkannt >> ---

Re: lyx file from 2015 not converted to pdf

2020-03-19 Thread Paul A. Rubin
On 3/19/20 12:03 PM, Wolfgang Engelmann wrote: I am trying to export from a lyx file produced in 2015 a pdf file, but get this error: Error: Softwareausnahme erkannt LyX hat einen Fehler (Exception) entdeckt. Das Programm wird jetzt versuchen, alle

lyx file from 2015 not converted to pdf

2020-03-19 Thread Wolfgang Engelmann
I am trying to export from a lyx file produced in 2015 a pdf file, but get this error: Error: Softwareausnahme erkannt LyX hat einen Fehler (Exception) entdeckt. Das Programm wird jetzt versuchen, alle ungespeicherten Dateien zu speichern, und dann

How to size of pdf cropped output

2020-03-17 Thread Fred Schenkelberg
Hi - is there a way or best practice to control the size of exported (pdf cropped) equations such that they become a specific or at least consistent font height from one pdf to another? I’m trying to use LyX as an equation editor and embedding the PDFs into InDesign and other documents like

Re: PDF output wrong size

2020-03-05 Thread Les
On Thu, 5 Mar 2020 18:56:43 + Paul Evans wrote: > I was struck by your observation that the memoir class ignores the > LyX page sizes. I have been using memoir as my base for most LyX > drafting and have happily used either the LyX defaults or minor > variations specified in the LyX settings

Re: PDF output wrong size

2020-03-05 Thread Paul Evans
> On 3 Mar 2020, at 21:30, Les wrote: > > On Tue, 3 Mar 2020 11:10:42 -0700 > Richard Opheim wrote: > >> Sorry about that. It's been a while since I posted. >> I'm running LyX 2.3.4.3 on WIN10. The class is memoir. I specify that >> the paper format should be 8 x 5, but the program doggedly

Re: PDF output wrong size

2020-03-05 Thread Les
On Thu, 5 Mar 2020 09:53:36 -0800 (PST) Rich Shepard wrote: > There's a tool called pdfjam that allows a pdf document to be resized > to different paper sizes (among other tweaks.) I learned of it when > printed web pages were legal rather than letter size. Using pdfjam I >

Re: PDF output wrong size

2020-03-05 Thread Rich Shepard
On Thu, 5 Mar 2020, Les wrote: Actually, /setstocksize alone does the trick. Les, I use the KOMA-Script classes, not memoir, but I offer information related to PDF page size that applies to existing PDF files, not generated ones in LyX. There's a tool called pdfjam that allows a pdf

  1   2   3   4   5   6   7   8   9   10   >