On Sun, 3 May 2009, Paul A. Rubin wrote:
Exporting to a .tex file (pdflatex) and either using an absolute path for the
image or putting it in the same directory as the .tex file works here, to the
extent that the institution-logo thing goes away and I get an itsy-bitsy
logo image (or a decent
On Sun, 3 May 2009, Paul A. Rubin wrote:
Exporting to a .tex file (pdflatex) and either using an absolute path for the
image or putting it in the same directory as the .tex file works here, to the
extent that the institution-logo thing goes away and I get an itsy-bitsy
logo image (or a decent
On Sun, 3 May 2009, Paul A. Rubin wrote:
Exporting to a .tex file (pdflatex) and either using an absolute path for the
image or putting it in the same directory as the .tex file works here, to the
extent that the "institution-logo" thing goes away and I get an itsy-bitsy
logo image (or a
Rich Shepard wrote:
There is a sample page attached that shows how the box and text are
displayed rather than the image itself.
How do you include the image? Do you use \pgfdeclareimage?
An example file would probably be enlighting.
Jürgen
On Sun, 3 May 2009, Juergen Spitzm?ller wrote:
How do you include the image? Do you use \pgfdeclareimage?
An example file would probably be enlighting.
Juergen,
My apologies for not including this in the original message:
\pgfdeclareimage[height=0.5cm]{institution-logo}{aesi-logo.pdf}
Rich Shepard wrote:
Last Wednesday I posted a message to the beamer-linux-users mail list on
sourceforge.net and have not seen a response to it, or any other post to
that mail list.
I'm back in the grove using the beamer class but still cannot get the
logo
to display on each slide. (It
On Sun, 3 May 2009, Paul A. Rubin wrote:
Mine display on the title slide, but I use a somewhat different approach.
I think that mine used to display on the title slide, too. It's been a
while since I created a presentation so I cannot be certain of what changed
when.
That coupled with the
On 03/05/2009 17:32, Rich Shepard wrote:
BTW, on a related issue, how can I use the keyboard to mark a large block
of text?
Pretty standard keyboard way: Shift+PageUp/Down or ArrowUp/Down.
You can also use Shift+left mouse click.
Abdel.
On Sun, 3 May 2009, Rich Shepard wrote:
Small file attached. Logo to follow on separate message as total size
(even when tarred and gzipped) exceeds MLM message size of 6 bytes.
Aw, rats. Message still too large. I put a copy (temporarily) of the logo
on our web site. You can use wget
On Sun, 3 May 2009, Abdelrazak Younes wrote:
Pretty standard keyboard way: Shift+PageUp/Down or ArrowUp/Down.
You can also use Shift+left mouse click.
Abdel,
Huh! I must have been pressing ctrl-PgDn instead of shift-PgDn.
The shift-left mouse click is too slow as I have to move the
Rich Shepard wrote:
\pgfdeclareimage[height=0.5cm]{institution-logo}{aesi-logo.pdf}
\logo{\pgfuseimage{institution-logo}}
where is that file aesi-logo.pdf stored? Since LyX compiles your file in a
temporary directory, you must either
* store it somewhere where TeX can find it (i.e., in
Ok, I don't have an answer to why you get the institution-logo
overprint (I did here too), but I have a workaround. Replace your two
LaTeX commands for the image with
\logo{\includegraphics[bb=0in 9.5in 2.6in 11in, clip,
height=0.5cm]{aesi-logo.pdf}}
and see if that helps.
/Paul
On Sun, 3 May 2009, J?rgen Spitzm?ller wrote:
where is that file aesi-logo.pdf stored? Since LyX compiles your file in a
temporary directory, you must either
It is in the pwd with the .lyx files.
Even when I provide the full path (which I had done before trying
yesterday it with the
Rich Shepard wrote:
It is in the pwd with the .lyx files.
Then, giving simply the file name will not work.
Jürgen
On Sun, 3 May 2009, Paul A. Rubin wrote:
\logo{\includegraphics[bb=0in 9.5in 2.6in 11in, clip,
height=0.5cm]{aesi-logo.pdf}}
and see if that helps.
Paul,
When I commented out the original two lines and added the above, it would
not run pdflatex to create a view. After a second it quit. No
On Sun, 3 May 2009, Paul A. Rubin wrote:
Ok, I don't have an answer to why you get the institution-logo overprint
(I did here too), but I have a workaround. Replace your two LaTeX
commands for the image with
\logo{\includegraphics[bb=0in 9.5in 2.6in 11in, clip,
\height=0.5cm]{aesi-logo.pdf}}
Rich Shepard wrote:
On Sun, 3 May 2009, Paul A. Rubin wrote:
Ok, I don't have an answer to why you get the institution-logo
overprint
(I did here too), but I have a workaround. Replace your two LaTeX
commands for the image with
\logo{\includegraphics[bb=0in 9.5in 2.6in 11in, clip,
On Sun, 3 May 2009, Paul A. Rubin wrote:
Ok, I think I've got this sorted out. Three things:
Thanks, Paul. I wish I had the time to dig deeply into LaTeX, LyX, and
PSTricks.
1. If you move the LaTeX code to a standard environment above the title,
you'll get the logo on the title page as
Rich Shepard wrote:
In the View menu I have three pdf options: dvipdfm, pdflatex, and ps2pdf.
With the original syntax none of the three produce the logo. Also,
exporting
to a .tex file using the pdflatex option rather than the plain TeX option
also doesn't work here.
Exporting to a
Rich Shepard wrote:
There is a sample page attached that shows how the box and text are
displayed rather than the image itself.
How do you include the image? Do you use \pgfdeclareimage?
An example file would probably be enlighting.
Jürgen
On Sun, 3 May 2009, Juergen Spitzm?ller wrote:
How do you include the image? Do you use \pgfdeclareimage?
An example file would probably be enlighting.
Juergen,
My apologies for not including this in the original message:
\pgfdeclareimage[height=0.5cm]{institution-logo}{aesi-logo.pdf}
Rich Shepard wrote:
Last Wednesday I posted a message to the beamer-linux-users mail list on
sourceforge.net and have not seen a response to it, or any other post to
that mail list.
I'm back in the grove using the beamer class but still cannot get the
logo
to display on each slide. (It
On Sun, 3 May 2009, Paul A. Rubin wrote:
Mine display on the title slide, but I use a somewhat different approach.
I think that mine used to display on the title slide, too. It's been a
while since I created a presentation so I cannot be certain of what changed
when.
That coupled with the
On 03/05/2009 17:32, Rich Shepard wrote:
BTW, on a related issue, how can I use the keyboard to mark a large block
of text?
Pretty standard keyboard way: Shift+PageUp/Down or ArrowUp/Down.
You can also use Shift+left mouse click.
Abdel.
On Sun, 3 May 2009, Rich Shepard wrote:
Small file attached. Logo to follow on separate message as total size
(even when tarred and gzipped) exceeds MLM message size of 6 bytes.
Aw, rats. Message still too large. I put a copy (temporarily) of the logo
on our web site. You can use wget
On Sun, 3 May 2009, Abdelrazak Younes wrote:
Pretty standard keyboard way: Shift+PageUp/Down or ArrowUp/Down.
You can also use Shift+left mouse click.
Abdel,
Huh! I must have been pressing ctrl-PgDn instead of shift-PgDn.
The shift-left mouse click is too slow as I have to move the
Rich Shepard wrote:
\pgfdeclareimage[height=0.5cm]{institution-logo}{aesi-logo.pdf}
\logo{\pgfuseimage{institution-logo}}
where is that file aesi-logo.pdf stored? Since LyX compiles your file in a
temporary directory, you must either
* store it somewhere where TeX can find it (i.e., in
Ok, I don't have an answer to why you get the institution-logo
overprint (I did here too), but I have a workaround. Replace your two
LaTeX commands for the image with
\logo{\includegraphics[bb=0in 9.5in 2.6in 11in, clip,
height=0.5cm]{aesi-logo.pdf}}
and see if that helps.
/Paul
On Sun, 3 May 2009, J?rgen Spitzm?ller wrote:
where is that file aesi-logo.pdf stored? Since LyX compiles your file in a
temporary directory, you must either
It is in the pwd with the .lyx files.
Even when I provide the full path (which I had done before trying
yesterday it with the
Rich Shepard wrote:
It is in the pwd with the .lyx files.
Then, giving simply the file name will not work.
Jürgen
On Sun, 3 May 2009, Paul A. Rubin wrote:
\logo{\includegraphics[bb=0in 9.5in 2.6in 11in, clip,
height=0.5cm]{aesi-logo.pdf}}
and see if that helps.
Paul,
When I commented out the original two lines and added the above, it would
not run pdflatex to create a view. After a second it quit. No
On Sun, 3 May 2009, Paul A. Rubin wrote:
Ok, I don't have an answer to why you get the institution-logo overprint
(I did here too), but I have a workaround. Replace your two LaTeX
commands for the image with
\logo{\includegraphics[bb=0in 9.5in 2.6in 11in, clip,
\height=0.5cm]{aesi-logo.pdf}}
Rich Shepard wrote:
On Sun, 3 May 2009, Paul A. Rubin wrote:
Ok, I don't have an answer to why you get the institution-logo
overprint
(I did here too), but I have a workaround. Replace your two LaTeX
commands for the image with
\logo{\includegraphics[bb=0in 9.5in 2.6in 11in, clip,
On Sun, 3 May 2009, Paul A. Rubin wrote:
Ok, I think I've got this sorted out. Three things:
Thanks, Paul. I wish I had the time to dig deeply into LaTeX, LyX, and
PSTricks.
1. If you move the LaTeX code to a standard environment above the title,
you'll get the logo on the title page as
Rich Shepard wrote:
In the View menu I have three pdf options: dvipdfm, pdflatex, and ps2pdf.
With the original syntax none of the three produce the logo. Also,
exporting
to a .tex file using the pdflatex option rather than the plain TeX option
also doesn't work here.
Exporting to a
Rich Shepard wrote:
> There is a sample page attached that shows how the box and text are
> displayed rather than the image itself.
How do you include the image? Do you use \pgfdeclareimage?
An example file would probably be enlighting.
Jürgen
On Sun, 3 May 2009, Juergen Spitzm?ller wrote:
How do you include the image? Do you use \pgfdeclareimage?
An example file would probably be enlighting.
Juergen,
My apologies for not including this in the original message:
\pgfdeclareimage[height=0.5cm]{institution-logo}{aesi-logo.pdf}
Rich Shepard wrote:
Last Wednesday I posted a message to the beamer-linux-users mail list on
sourceforge.net and have not seen a response to it, or any other post to
that mail list.
I'm back in the grove using the beamer class but still cannot get the
logo
to display on each slide. (It
On Sun, 3 May 2009, Paul A. Rubin wrote:
Mine display on the title slide, but I use a somewhat different approach.
I think that mine used to display on the title slide, too. It's been a
while since I created a presentation so I cannot be certain of what changed
when.
That coupled with the
On 03/05/2009 17:32, Rich Shepard wrote:
BTW, on a related issue, how can I use the keyboard to mark a large block
of text?
Pretty standard keyboard way: Shift+PageUp/Down or ArrowUp/Down.
You can also use Shift+left mouse click.
Abdel.
On Sun, 3 May 2009, Rich Shepard wrote:
Small file attached. Logo to follow on separate message as total size
(even when tarred and gzipped) exceeds MLM message size of 6 bytes.
Aw, rats. Message still too large. I put a copy (temporarily) of the logo
on our web site. You can use wget
On Sun, 3 May 2009, Abdelrazak Younes wrote:
Pretty standard keyboard way: Shift+PageUp/Down or ArrowUp/Down.
You can also use Shift+left mouse click.
Abdel,
Huh! I must have been pressing ctrl-PgDn instead of shift-PgDn.
The shift-left mouse click is too slow as I have to move the
Rich Shepard wrote:
> \pgfdeclareimage[height=0.5cm]{institution-logo}{aesi-logo.pdf}
> \logo{\pgfuseimage{institution-logo}}
where is that file aesi-logo.pdf stored? Since LyX compiles your file in a
temporary directory, you must either
* store it somewhere where TeX can find it (i.e., in
Ok, I don't have an answer to why you get the "institution-logo"
overprint (I did here too), but I have a workaround. Replace your two
LaTeX commands for the image with
\logo{\includegraphics[bb=0in 9.5in 2.6in 11in, clip,
height=0.5cm]{aesi-logo.pdf}}
and see if that helps.
/Paul
On Sun, 3 May 2009, J?rgen Spitzm?ller wrote:
where is that file aesi-logo.pdf stored? Since LyX compiles your file in a
temporary directory, you must either
It is in the pwd with the .lyx files.
Even when I provide the full path (which I had done before trying
yesterday it with the
Rich Shepard wrote:
> It is in the pwd with the .lyx files.
Then, giving simply the file name will not work.
Jürgen
On Sun, 3 May 2009, Paul A. Rubin wrote:
\logo{\includegraphics[bb=0in 9.5in 2.6in 11in, clip,
height=0.5cm]{aesi-logo.pdf}}
and see if that helps.
Paul,
When I commented out the original two lines and added the above, it would
not run pdflatex to create a view. After a second it quit. No
On Sun, 3 May 2009, Paul A. Rubin wrote:
Ok, I don't have an answer to why you get the "institution-logo" overprint
(I did here too), but I have a workaround. Replace your two LaTeX
commands for the image with
\logo{\includegraphics[bb=0in 9.5in 2.6in 11in, clip,
Rich Shepard wrote:
On Sun, 3 May 2009, Paul A. Rubin wrote:
Ok, I don't have an answer to why you get the "institution-logo"
overprint
(I did here too), but I have a workaround. Replace your two LaTeX
commands for the image with
\logo{\includegraphics[bb=0in 9.5in 2.6in 11in, clip,
On Sun, 3 May 2009, Paul A. Rubin wrote:
Ok, I think I've got this sorted out. Three things:
Thanks, Paul. I wish I had the time to dig deeply into LaTeX, LyX, and
PSTricks.
1. If you move the LaTeX code to a standard environment above the title,
you'll get the logo on the title page as
Rich Shepard wrote:
In the View menu I have three pdf options: dvipdfm, pdflatex, and ps2pdf.
With the original syntax none of the three produce the logo. Also,
exporting
to a .tex file using the pdflatex option rather than the plain TeX option
also doesn't work here.
Exporting to a
51 matches
Mail list logo
