Hi Jesse,
Is there any more information accompanying those mods that are pictured?
Best,
~George
> On Mar 16, 2019, at 1:42 PM, Mike Stein wrote:
>
> - Original Message -
> From: Jesse Huyett
> To: m...@bitchin100.com
> Sent: Saturday, March 16, 2019 4:08 AM
> > Hello All,
> > Has
- Original Message -
From: Jesse Huyett
To: m...@bitchin100.com
Sent: Saturday, March 16, 2019 4:08 AM
> Hello All,
> Has anyone tried a Gotek/ HxC in the DVI?
A Gotek might be a challenge but FWIW 3.5" drives work quite well.
With a little futzing you could have both ;-)
Hello All,
Has anyone tried a Gotek/ HxC in the DVI?
I remember looking into this a while back, but couldn't figure out how to
create the right format within the HxCFloppyEmulator software.
Regards
On Fri, Mar 15, 2019 at 1:22 PM George Michael Rimakis
wrote:
> Hi all,
>
> I got my parts, and
I remember my full height Coco floppy drives required not just cleaning but
people would also do some timing or alignment them. I don't think I went
through the process but they were capable of being calibrated I some way.
You'd think that would more affect writing on one drive and reading on
likely old caps in the drive or controller needing replacement
On Fri, Mar 15, 2019 at 6:23 PM Randall Kindig
wrote:
> Funny you should ask. At Tandy Assembly (http://www.tandyassembly.com)
> last year I found the same issue with my single-drive DVI. I can boot from
> a disk fine, but cannot