Hi Jim
Yes, M100 CP/M prints to the M100 parallel port. Try LPRINT in MBASIC to
get your setup working - it does definitely work. I don't know for sure
with WordStar, but it could be necessary to do STAT LST:=LPT: before
firing up WordStar.
Philip
On 21/10/2020 5:02 am, Jim Anderson
Thanks, very nice,
Jeff Birt
-Original Message-
From: M100 On Behalf Of Michael Kohne
Sent: Monday, October 26, 2020 1:47 PM
To: m...@bitchin100.com
Subject: [M100] Scans of the Model 100 schematics from the Technical Reference
Manual
I had a lot of problems using the schematics that
On Mon, Oct 26, 2020 at 2:47 PM Michael Kohne wrote:
>
> I had a lot of problems using the schematics that were previously
> scanned from the technical reference manual, so I bought a copy of the
> manual and scanned just the schematics, in higher resolution, on a
> large format scanner.
Thank
I had a lot of problems using the schematics that were previously
scanned from the technical reference manual, so I bought a copy of the
manual and scanned just the schematics, in higher resolution, on a
large format scanner.
They've been uploaded to the internet archive at
Hi Josh,
On 10/26/20 12:57 PM, Joshua O'Keefe wrote:
> On Oct 26, 2020, at 9:38 AM, Bert Put wrote:
>> Ctl-E: up one line
>> Ctl-S: left one char
>> Ctl-X: down one line
>> Ctl-D: right one char
>
> Also incredibly useful are Control-A and Control-F, which go back or forward
> by one word. At
On Oct 26, 2020, at 9:38 AM, Bert Put wrote:
> Ctl-E: up one line
> Ctl-S: left one char
> Ctl-X: down one line
> Ctl-D: right one char
Also incredibly useful are Control-A and Control-F, which go back or forward by
one word. At least I remember those were present in WordStar 4, but I think
Yay!
Congratulations Jonathan, I'm glad my notes were able to help you.
There are lots of key combinations in Wordstar that I just have in
muscle memory so I hardly remember doing it, but here's a few:
Ctl-E: up one line
Ctl-S: left one char
Ctl-X: down one line
Ctl-D: right one char
These all
Hello All,
My rexcpm and mvt100 kit arrived last week. There were some hiccups getting
the software installed on the rexcpm, and I suspect part of the problem was
himem issues with the teeny.com that mcomm sends over. After a number of
super-helpful emails with Stephen, he suggested a serial