Re: [M100] Replaced NiCD with NiMH

On Mon, May 7, 2018, 9:49 PM Fugu ME100 wrote: > The motherboard hooks under the clips on the 102  > Aha! Thank you! -- bkw >

Re: [M100] Replaced NiCD with NiMH

The motherboard hooks under the clips on the 102  If left on top the case will not close properly. The 100 and 102 are a breeze to work on compared to the 200. Just getting the screen cable detached is almost impossible, reattaching is a nightmare. There may be a trick but it was beyond

Re: [M100] Replaced NiCD with NiMH

I never ran into any such craziness working on a 102. It comes apart and lays out just fine, and replacing the nicd is no big deal at all. Going back together, there is one non-obvious part where you have to know whether the bottom edge of the motherboard is supposed to hook under, under or rest

Re: [M100] Replaced NiCD with NiMH

was getting the space-bar back all back together. GregS <>< - Original Message - From: "George Rimakis" <grima...@gmail.com> To: m100@lists.bitchin100.com Sent: Monday, May 7, 2018 6:02:49 PM Subject: [M100] Replaced NiCD with NiMH Finally replaced the batter

[M100] Replaced NiCD with NiMH

Finally replaced the battery in my M102. My goodness was it hard to work on. I couldn't disconnect the keyboard and screen, so I ended up have to hold the motherboard vertically when soldering in the new battery. Getting it back together? Not the easiest! How much easier is it to work on The