to:clh...@gmail.com>>
Reply-To: mailto:m...@bitchin100.com>>
Date: Friday, January 4, 2019 at 6:29 AM
To: mailto:m100@lists.bitchin100.com>>
Subject: [M100] TPDD 2 request for info
I have determined that the power input is capable of supplying about 6VDC to
the board when powere
I have determined that the power input is capable of supplying about 6VDC
to the board when powered by a set of four fresh AA alkalines, and about 7
VDC from a TRS power adapter, aka "wall wart".
With the adapter supplying power and with the cable to the drive PCB
disconnected - in other words,
Well there's information at bitchin100.com especially on the wiki about
programming the serial protocol. There is source code to laddiealpha,
dlplus available.
A list member did some reverse engineering of the firmware, you can check
the archives for this mailing list.
-- John.
On Thu, Jan 3,
I have always suspected that the little aluminum shield could be a
grounding hazard.
I would look closely at the clearances there and make sure that it is not
grounding the supply.
I think you can even assemble it without the shield...
just checked, don't seem to have a service manual for
