tach pictures to messages here but the total message size must
> stay below 64KB, so you might have to reduce their size and/or resolution.
>
>
>
> Good luck and, again, welcome!
>
>
>
> mike
>
>
>
> - Original Message -
>
> *From:* Joshua Ray <sabiorsa.
, 2017 at 10:13 PM, Joshua Ray <sabiorsa...@gmail.com> wrote:
> Success! Well, at least with getting the case apart. I took a pair of
> credit cards and wedged them into one of the back corners, then followed up
> with a long thin spoon handle for leverage. This way I didn't mar t
r on, then hold CTL BREAK and press RESET button.
>
> Good luck!
>
> - Original Message -
> *From:* Joshua Ray <sabiorsa...@gmail.com>
> *To:* m...@bitchin100.com
> *Sent:* Thursday, June 15, 2017 6:09 PM
> *Subject:* Re: [M100] Tandy 200 repair, guidance
tic start-
>
> pull batts
> hold down control and break, and then power up.
>
> On Thu, Jun 22, 2017 at 2:54 PM, Joshua Ray <sabiorsa...@gmail.com> wrote:
> > I did try to cold start. There was no response though.
> >
> > On Thu, Jun 22, 2017 at 2:52 PM, Josh Malon
The NiCd? 3.83 V.
On Thu, Jun 22, 2017 at 4:12 PM, Stephen Adolph <twospru...@gmail.com>
wrote:
> what is the voltage on your internal ram backup battery please?
>
> On Thu, Jun 22, 2017 at 4:09 PM, Joshua Ray <sabiorsa...@gmail.com> wrote:
> > Well... I've tried
odel T computers eventually need the arctic restart ;)
>
> On Thu, Jun 22, 2017 at 3:19 PM, Joshua Ray <sabiorsa...@gmail.com> wrote:
> > Can I do that if I don't have the power adapter? Is it control, break,
> > reset, or just control, break?
> >
> > Also,
Hi all,
I'm new to the mailing list. I was referred here from the vcfed forum.
I have a Tandy 200 that needs some help. The power key is damaged and
disconnected from the keyboard. I have a pdf of the service manual, and I'm
trying to disassemble the device so I can check the internals and
down CTRL BREAK while you press RESET
>
> - Original Message -
> *From:* Joshua Ray <sabiorsa...@gmail.com>
> *To:* m...@bitchin100.com
> *Sent:* Thursday, June 15, 2017 5:39 PM
> *Subject:* Re: [M100] Tandy 200 repair, guidance requested
>
> I don't have the
I don't have the power adapter unfortunately. Will it function just as well
on AA batteries?
Could you also explain what you mean by cold start?
Thanks!
On Thu, Jun 15, 2017 at 5:34 PM, John R. Hogerhuis wrote:
> Power problems are common when you first get a Model T out of
standard toggle switch, right? The service manual
> gives a RS and a mfr part number, but neither of those numbers turn up
> anything useful on the goog. Any chance there's markings visible on the
> switch housing that might point to a manufacturer at least?
>
> On Mon, Jun 12, 201
t
>
>
> On Thursday, June 22, 2017 1:09 PM, Joshua Ray <sabiorsa...@gmail.com>
> wrote:
>
>
> Well... I've tried both cold and arctic starts and I'm still getting
> vertical lines and unresponsiveness.
>
> Out of curiosity I took the power switch apart again and th
Hi all,
Are there any particular rules for selling items on the list?
Thanks.
12 matches
Mail list logo