[M100] T200 Rom question

According to the manual, the ROM on the T200 is contained in two chips. M13 which is an 8k ROM chip, and M15 which is a 32k chip. Are these standard 27C256 and 27C64 chips in terms of pin configuration? I think they are in sockets but I'd have to pull mine apart to know for sure. Does anybody

Re: [M100] T200 Rom question

Thanks Ray. I found a picture of the main board online and indeed it does appear to be a socket. I plan to open my 200 up to replace the NiCd with a super capacitor. While I have it open I may do a Y2k/Personalized ROM swap. Kurt On Mon, 3/30/15, ray

Re: [M100] Interesting 102

. - Kurt On Thu, 3/26/15, Kurt McCullum kurt.mccul...@att.net wrote: Subject: Interesting 102 To: Model Discussion m100@lists.bitchin100.com Date: Thursday, March 26, 2015, 8:05 AM I saw this on eBay this morning

Re: [M100] VirtualT 1.7 Speed

I have noticed it. I just adjusted the speed higher. The 200 emulation doesn't seem to have as much delay but definitely the 100/102. Kurt On 4/23/2015 6:08 PM, Miles Willmek wrote: Has anyone else noticed that v1.7 is significantly slower? For instance in T102 mode w/ 2.4MHz selected the

Re: [M100] new EU M100 main ROM / REX compatibility.

You could get a new EPROM burned and just drop it in to replace the one that's in there now. Plus fix theY2K issue at the same time. buyicnow.com is a really inexpensive way to go. I had two 32k EPROMS made for my T200. It took about a week to get them but they were programmed with the image I

Re: [M100] new EU M100 main ROM / REX compatibility.

it to work, so I can get back to using my M100 :-) James On 4 May 2015 6:29 pm, Kurt McCullum kurt.mccul...@att.net mailto:kurt.mccul...@att.net wrote: You could get a new EPROM burned and just drop it in to replace the one that's in there now. Plus fix theY2K issue at the same time

Re: [M100] new EU M100 main ROM / REX compatibility.

I don't mind at all. On Monday, May 4, 2015 11:57 AM, James Zeun james.z...@gmail.com wrote: Kurt thats actually a lot cheaper then I expected! Would you mind if I emailed you about how to go about getting some roms written? On 4 May 2015 at 19:36, Kurt McCullum kurt.mccul

Re: [M100] DISK+ ROM but no floppy for PC side

Two Windows TPDD emulators LaddieAlpha http://bitchin100.com/files/linux/LaddieAlpha.EXE Tried and true TPDD emulator. Very stable. mComm http://www.club100.org/memfiles/index.php?action=downloadfilefilename=setup151.EXEdirectory=Kurt%20McCullum; A TPDD emulator with Sardine support which

Re: [M100] DISK+ ROM but no floppy for PC side

Steve, Are you running DOS or Windows? Kurt On 4/30/2015 6:22 PM, Steven Ranft wrote: I KNEW I would have a dire need for this groups some day. I just bought my 4th Model T. I am new to these wonderful machines, and need to spend a LOT of time searching for answers. This latest machine came

Re: [M100] T200 ^K in Text

that have matching text. On Thu, Apr 30, 2015 at 11:07 AM, Kurt McCullum kurt.mccul...@att.net wrote: I was putting together a little cheat sheet of the control commands in TEXT/TWord and I stumbled on ^K. When I press it a different program comes up but I'm at a loss as to what it is. Can

Re: [M100] My TRS-80 M100 and going to the park

I was at McDonalds the other day and I was typing away on my 102 and a guy stopped and said My God! Is that a TRS-80. I remember those. It still works? Wow, that's cool. I always wanted one or those little things. Something about the keyboard draws the eye, or maybe the ears. Click click click

Re: [M100] new EU M100 main ROM / REX compatibility.

Great info Mike. Thanks! On Monday, May 4, 2015 2:39 PM, MikeS dm...@torfree.net wrote: - Original Message - From: Kurt McCullum To: Model 100 Discussion Sent: Monday, May 04, 2015 3:51 PMSubject: Re: [M100] new EU M100 main ROM / REX compatibility. Mike, Would the same

[M100] Virtual-T Num key

To pull up the calculator on a T200, I would normally press Graph + Num. Looking at the Virtual-T manual I see the Graph key is mapped to the left Alt key, but nothing for num. A normal numlock on my keyboard doesn't seem to do anything either. What key combo do I need to use? Kurt

Re: [M100] NewDos

it to a working state. Ken On Wed, Apr 8, 2015 at 9:39 AM, Kurt McCullum kurt.mccul...@att.net wrote: Does NewDOS exist for the 200? Kurt

Re: [M100] NewDos

, then patch any references to addresses in that range. Ken On Wed, Apr 8, 2015 at 10:10 AM, Kurt McCullum kurt.mccul...@att.net wrote: Thanks for the update Ken, One question about the ROM versions of NewDos. I noticed on the versions you have in your memfiles area that the code has been

[M100] Time Minder

Does anybody have a copy of Time Minder 26-3883 for the T200 that they would like to part with? Kurt

Re: [M100] Barcode Wand

can even use it to read bar codes!  m - Original Message - From: Kurt McCullum To: Model 100 Discussion Sent: Thursday, June 18, 2015 5:39 PM Subject: Re: [M100] Barcode Wand Thanks for the info! On Thursday, June 18, 2015 2:14 PM, Doug Jackson d...@doughq.com wrote

Re: [M100] Barcode Wand

that HP used on the HP41 (http://www.ecse.rpi.edu/Courses/CStudio/data%20sheets/HEDS3050.PDF)   I have both the TRS80 wand and the HP in storage here if anybody wants information. Doug On 19/06/2015 6:56 AM, Kurt McCullum wrote: Does the barcode interface use a TTL level signal? Meaning

Re: [M100] Club 100 store still functional?

Jay, It's still active but Ken might take a little time to get to your order. He's a busy man but still maintains the club100 site. The box you mentioned is the NADSBox. A couple months ago Ken did mention that there is a limited supply. Kurt On 6/11/2015 5:13 AM, J MacDermott wrote: Hi

Re: [M100] Mxxx Software of 3.5

John, Check to see if one of those disks is Sardine for the 10x. Not the American Dictionary disk (That's been found) but the regular program disk. The 200 version was found by Bob Pigford a few months back but I've still been on the lookout for the 10x version. As far as scanning the labels

Re: [M100] File transfer problems. A couple of them, actually

You could always try using the win32 mode that the latest version offers. I had some trouble with a usb to serial adapter and John put some code in to use the win32 API directly. This solved the issues I was having with my adapter. Since then I've upgraded my hardware and when using

[M100] TSLOAD.CO or .BA?

All of this talk about loading a DOS client got be thinking about the RAM versions of TS-DOS. The .CO files for 100/200/NEC are readily available. But I have been having trouble locating the TSLOAD program and what i think is the Basic code that loads it. Based on the documentation, an IPL.BA

Re: [M100] Update on my M100 and REX

James, I've never used teeny. From what I understand it's a DOS program that must have com1-4 to load a client onto the M100. But other than that I don't know much about it. a TPDD client like TS-DOS allows you to connect directly to your drive. Getting one loaded is not always easy. Obviously

Re: [M100] Update on my M100 and REX

by playing the audio through the sound card on his PC. I am making an assumption that teeny.co can be loaded this way, so please correct me if I'm wrong. Kurt On 5/27/2015 4:42 PM, John R. Hogerhuis wrote: On Wed, May 27, 2015 at 2:19 PM, Kurt McCullum kurt.mccul...@att.net wrote: James

Re: [M100] Update on my M100 and REX

Mike, Yes, using the TELCOM mode is limited to .DO files or untokenized .BA files (which will tokenize while loading in Basic). The latest version is also a TPDD server and a Sardine dictionary disk server. Kurt On Thursday, May 28, 2015 8:50 AM, Mike Stein mhs.st...@gmail.com wrote:

Re: [M100] Upgrade via System Bus ?

The system bus has been used for quite a few hardware add ons. DVI, and some ram /rom expansion devices.The most elaborate was the Booster PAK which changes the machine quite a bit. There are two on ebay. Just search for Purple Computing Kurt On Tuesday, June 2, 2015 9:27 AM, Hiraghm

Re: [M100] Programming languages for the Model 100?

Does this book still exist? The Secrets of the Option ROM Revealed by Mo Budlong On Thursday, June 11, 2015 7:52 AM, John R. Hogerhuis jho...@pobox.com wrote: I don't know. I bought a legit copy a few years back.  On Thursday, June 11, 2015, Mike Stein mhs.st...@gmail.com wrote:

Re: [M100] Programming languages for the Model 100?

On Thursday, June 11, 2015 9:03 AM, John R. Hogerhuis jho...@pobox.com wrote: On Thu, Jun 11, 2015 at 8:36 AM, Kurt McCullum kurt.mccul...@att.net wrote: Does this book still exist? The Secrets of the Option ROM Revealed by Mo Budlong It exists at my house. Mo also wrote RBASIC

[M100] 26-3893 Project Scheduler

Anybody have a copy of Project Scheduler (26-3893) for the T200 that they would be willing to part with for some cash? Kurt

Re: [M100] Time Minder

of all bits), -=Ron Wiesen =-   From: M100 [mailto: m100-boun...@lists.bitchin100.com ] On Behalf Of Kurt McCullum Sent: Monday, June 29, 2015 20:20 To: Model 100 Discussion Subject: [M100] Time Minder   Irecently acquired (Thanks Lee!) a copy of Time Minder for the T200. Afterloading it up I

[M100] mComm 1.61

After doing some testing with 1.6 I made some changes and bug fixes to mComm. The Telnet (client/bridge or whatever you want to call it) works fine but the only BBS systems that have any hope of displaying properly are the Commodore 64 sites that have a 40 column display. I've logged on to

Re: [M100] Out of storage and .. on to the bench.

Dan, My 102 arrived from eBay with several dead keys. I traced it down to two cracks on the circuit board. It took some time but I finally fixed it with some bypass wires. One of the things I did to diagnose the dead keys was to look at the schematic and find the two leads that the key should

Re: [M100] TS-DOS Not Found

Barry, Are you trying to connect to your 100/102/200 or a TPPD drive? According to the documentation for LapDos II on Club100.org, there are two different cables depending the connection. Also, what COM port is your USB to serial set to? My guess is LapDos want's 1 or 2 Kurt On Monday,

Re: [M100] TS-DOS Not Found

From the Lapdos manual---HAVING PROBLEMS? Once you have successfully started LAPDOS, your monitor will display two windows. The window on the left will show files on your desktop computer, the window on the right files on the disk in the portable disk

Re: [M100] mComm 1.61

John, Interesting. That seems to work better. What I notice most is that HTERM scrolls MUCH faster on the screen. Kurt On 8/5/2015 3:31 PM, John R. Hogerhuis wrote: On Wednesday, August 5, 2015, Kurt McCullum kurt.mccul...@att.net mailto:kurt.mccul...@att.net wrote: After doing some

[M100] Multi Solutions ROM

Is there an image of the Multi Solutions ROM for the 200 anywhere? I've been all over the club100 ftp site, bitchin100 (REX images) and I've come up blank. Kurt

Re: [M100] TS-DOS Not Found

but it might get you up and running. Kurt -- On Wed, Jul 22, 2015 7:49 AM PDT Barry Rands wrote: No DIP switches on the TDD2. Drive is spinning, so diskette may be bad. Any way to get a new disk? On Wed, Jul 22, 2015 at 7:21 AM, Kurt McCullum kurt.mccul...@att.net

Re: [M100] Recent article about Model 100 posted on Ars Technica

I think John has a version of LaddieAlpha for Linux but I'll defer that to him since my information is specific to Windows. Kurt On 7/21/2015 10:26 PM, Peter Vollan wrote: What software would you recommend on the PC side for that? I run Linux. On 21 July 2015 at 22:22, Kurt McCullum

Re: [M100] Recent article about Model 100 posted on Ars Technica

for the PC link… From: M100 on behalf of Kurt McCullum Reply-To: Model 100 Discussion Date: Tuesday, July 21, 2015 at 11:52 AM To: Model 100 Discussion Subject: Re: [M100] Recent article about Model 100 posted on Ars Technica Sean, If your using TELCOM, you will need a 9-25 null modem cable. The one listed

Re: [M100] TS-DOS Not Found

The disk could be bad or the drive itself might be bad. If the drive isn't spinning check the drive belt. It may be broken. Club100 should have spares. Kurt On 7/22/2015 7:07 AM, Barry Rands wrote: Thanks for the response. I do have the original TS-DOS diskette in the drive. Could it be that

Re: [M100] time

2015 07:09 PM, Kurt McCullum wrote: I just tested this on my T200 with mComm. Works fine. From the file viewer Press ! and then the Telnet URL prompt comes up. Entering time.nist.gov:13 and pressing ENTER gives the time. I'm not sure what the numbers before the date or after the sec

Re: [M100] time

mComm (Windows TPDD/TELCOM server) has the ability to create a Telnet session. My intent was to use it to attach to the various BBS systems. But until somebody sets up a BBS for the 40x8 screen size with escape codes specific to the M100, it's a bit pointless. Butif you want to check the

Re: [M100] QUAD for T102

enough, and easy enough to make.  It will just be a lump plugged into the back - pretty small, doubt that it would be clumsy or in the way at all. On Thu, Oct 15, 2015 at 10:00 AM, Kurt McCullum <kurt.mccul...@att.net> wrote: Steve,That sounds like a great idea. Curious to see how you 'encas

[M100] Speed Question

I finally did a side by side with my 102 and 8201 using an identical 17k text file and testing all sorts of scrolling, searching ect. No difference at all. Only in BASIC is there a difference due to the default integer difference.

Re: [M100] NEC Eprom

PM, Kurt McCullum <kurt.mccul...@att.net <mailto:kurt.mccul...@att.net>> wrote: I've had a few eproms burned at buyicnow.com <http://buyicnow.com>. My T200 had a new system rom with the Y2K patch and I did the same thing for my NEC 8201. However, I've had

[M100] Download OptRom

On an NEC 8201, is there a way to pull the binary image of the installed OptRom and spit it out as hex through the serial port. Kurt

Re: [M100] Download OptRom

e M100 and T200 versions also. I think this just streams hex encoded data out the serial port at 19200. should result in a 64k file on the receiving end.  capture text with a comm program on a pc. steve On Mon, Oct 12, 2015 at 11:38 AM, Kurt McCullum <kurt.mccul...@att.net> wrote: On

[M100] 8201 Cross Bank Copy

Is there a way to do a cross bank copy with the 8201 other than having the XFILES.CO loaded on every bank? Kurt

Re: [M100] 8201 Cross Bank Copy

Steve On Tuesday, October 6, 2015, Kurt McCullum <kurt.mccul...@att.net> wrote: > Is there a way to do a cross bank copy with the 8201 other than having the > XFILES.CO loaded on every bank? > Kurt > >

Re: [M100] 8201 Cross Bank Copy

> > wrote: > > > Not that I know of. I don't think the routines are there. Too bad! > Steve > > On Tuesday, October 6, 2015, Kurt McCullum <kurt.mccul...@att.net> wrote: >> Is there a way to do a cross bank copy with the 8201 other than having the >> XFILES.CO loaded on every bank? >> Kurt >> >> > >

[M100] Speed Question

I acquired an NEC8201 a couple weeks back and I've been doing some comparisons (as well as updating mComm to work better with it). Is it just me or is the 8201 faster than the 102 and 200? I seem to notice it most with screen refreshes. Kurt

Re: [M100] Hey Ken

so not sure what's going on there. Ken On Fri, Oct 9, 2015 at 10:35 AM, James Zeun <james.z...@gmail.com> wrote: It's actually gone out to the list by accident. But that's no problem, I might need the help of my fellow m100 users. As I keep trying to load Lander.ba and get told

Re: [M100] Hey Ken

il.com> wrote: Kurt All i have is a blinking cursor and nothing else :( On 9 October 2015 at 23:00, Kurt McCullum <kurt.mccul...@att.net> wrote: Hit the enter key when you first enter terminal mode. That will switch mComm over to TELCOM mode and you should see a message that s

Re: [M100] Hey Ken

James, Glad to hear you got your REX working but I think you meant to send this email to Steve and not me since he is the one who creates those modules. Kurt On Friday, October 9, 2015 9:09 AM, James Zeun wrote: I've not had much time to play with the REX

Re: [M100] OptRom Problems

program to compute main rom check sum. just add numbers and let it roll over 64k. convert to hex and compare to virtual T's rom. Steve On Mon, Oct 12, 2015 at 11:54 PM, Kurt McCullum <kurt.mccul...@att.net <mailto:kurt.mccul...@att.net>> wrote: I'm looking for some thoughts

Re: [M100] OptRom Problems

/12/2015 9:05 PM, Kurt McCullum wrote: Alright, I'll check that. It's strange because my unit came with an Ultimate Rom II installed and that works fine. The main ROM is new, taken from the Virtual-T image. I replaced the (c) Microsoft and put my name in but other than that it's the same. I'll

[M100] OptRom Problems

I'm looking for some thoughts on a problem I am having with a Sardine OptRom. I have made two orders from an outfit that will burn eproms for me. Both times I've sent the binary image of the Sardine ROM and neither one works. Steve Adolph was kind enough to send me a program to download the

[M100] Member Files Size Limit

What is the size limit for files being uploaded to the members area? I scanned a manual for Time Minder and at 18mb the PDF is too large to upload. Are there options to put it in the DOC area of the ftp site? Kurt

Re: [M100] M100 upgrades

Rex and Quad are both made by Steve Adolph. The Quad gives you 4 banks of memory and REX gives you to 16 option roms and 16 saved banks of memory. Both should be available through club100. Kurt On 9/12/2015 6:49 PM, Randall Kindig wrote: Hi, guys! I have a 24K M100 and want to upgrade it.

[M100] Software Bounty

All, I'm offering up a bounty for the first person who can find the RAM version of Sardine for the NEC 8201a and email it to me. I'll gladly pay $20 for SARNEC.CO. This isn't the same file as the 32k ROM image on club 100. What I'm looking for is the file that works with The Ultimate ROM II

[M100] Keyboard Layout

Saw this 102 today and other than being a French version, I noticed the keyboard layout was like nothing I had ever seen before. Is anybody familiar with this arrangement of keys? Ordinateur TANDY 102 avec boite BOXED computer |   | |   | |   |   |   |   |   | | Ordinateur TANDY 102 avec boite

Re: [M100] Keyboard Layout

*To:* Model 100 Discussion <mailto:m100@lists.bitchin100.com> *Sent:* Friday, September 11, 2015 2:55 PM *Subject:* Re: [M100] Keyboard Layout Looks like just a standard French keyboard layout. On Fri, Sep 11, 2015 at 1:12 PM, Kurt McCullu

Re: [M100] Keyboard Layout

Good one! On 9/11/2015 5:22 PM, John R. Hogerhuis wrote: It's well known that AZERTY is actually the optimal layout for quickly typing the phrase "We surrender!" -- John.

Re: [M100] m200 malfunction question - two lines on screen at power off

As Steve said, let the battery charge. I had the same problem when I replaced the NiCd with a super capacitor. In my case, the voltage was too high and the T200 just sat there with two lines and wouldn't turn off. I ended up removing the capacitor. I have yet to put a new NiCd in so when I

Re: [M100] Transferring files

com> wrote: You guys are great but I am specfically referring to Linux. (I run Mint 17 Mate FYI.) I have a radio shack usb to serial cable, getting that working should be a priority I suppose. On 28 September 2015 at 07:48, Kurt McCullum <kurt.mccul...@att.net> wrote: If you have T

[M100] NEC Basic Token List

I was looking at a tokenized NEC 8201a Basic file and it appears that the tokens are different than the 100/102/200 tokens. I tested this in Virtual T with the following one liner.0 PRINT "TEST" The "PRINT" command gets tokenized as 0xa3 on the Tandy and 0x91 on the NEC. Which leads me to

[M100] Sidecar memory Module

Years ago Purple Computing made the SideCar memory module for the NEC 8201. NEC had their own single and 4 bank plug in modules as well. Is there a modern equivalent to this? Something internal like the Quad for the 100? Kurt

Re: [M100] Keyboard issues

Jessica, There is an old message thread from March of 2014 (bitching100 archives) about bad keys on a 102. Take a look at that for suggestions. If it's a single key it may need to be cleaned or replaced. Kurt On 9/26/2015 12:07 PM, Jessica Armstrong wrote: Hi all, I’ve got quite a few

[M100] POWER CONT

Quick question for those with knowledge of the NEC 8201. According to the manual, entering POWER CONT in BASIC will turn off the auto shutdown mode. However, when I type this in and get the OK prompt, the unit still shuts down after 20 minutes. Am I missing something? Kurt

Re: [M100] Full Null Modem Cable Cottage Industry?

I can't check all the details right now but I believe this is the USB to db25 male null modem cable I posted about a few months back. Though the price at that time was $25 not $45.

[M100] mComm 1.7

Just wanted to let you all know I'm in the final testing stages of mComm version 1.7 This big news with this version is SSH support. This will allow you to log into a unix/linux box if you so choose. I'm trying to figure out which TERMCAP is best for the m100/200 but I have yet to settle in

[M100] mComm 1.7

I just uploaded the install for mComm 1.7. The SSH client seems to be working well but if you have any issues with it let me know. I uploaded a terminfo file as well because the M100/T200 termcaps are not installed by default. To install it you will need to make a directory in the user folder

Re: [M100] Is it possible to use a USB flash drive with a Model 100

I've been using the Sony ICD-700 and ICD-PX333 for loading Time Minder or Romulus Chess onto my 200. The 192kb MP3 format works perfectly and I can name the file on the recording device for easier loading later. It also works with text files but those take longer to load and save than CO and

Re: [M100] Is it possible to use a USB flash drive with a Model 100

That would be John. The trouble I have run into with phones is that the 4 wire connector for audio and mic requires some components in the cable to make the phone think it's working with a headset. My guess is, each phone tests the resistance to see if a MIC or headphone is there. Not sure but

Re: [M100] Is it possible to use a USB flash drive with a Model 100

I have not tried an iPhone/iPad but my PC gave me unreliable results. The handheld recorders adjust to the input level when saving and on playback I just set it to max volume. Works perfectly at 192kb but 128kb gives me mixed results. It's slow no matter what kind of data your are

Re: [M100] USB power for Model T

John, That's quite a find! 6v center negative from a USB source. Nice! Any idea if they will make them available for purchase? Kurt On Tuesday, January 12, 2016 12:14 PM, John R. Hogerhuis wrote: I mentioned a little while back that I was looking into a USB to

Re: [M100] USB power for Model T

Thanks John, I'll check it out. Kurt On Tuesday, January 12, 2016 1:30 PM, John R. Hogerhuis <jho...@pobox.com> wrote: On Tue, Jan 12, 2016 at 12:50 PM, Kurt McCullum <kurt.mccul...@att.net> wrote: John, That's quite a find! 6v center negative from a USB source. Ni

[M100] NEC Bug?

I ran into what I think is a bug on the NEC 8201 and I was wondering if anyone had ever run into it before. I'm looking for a solution but I realize there may not be one.BUG: TS-DOS ROM loaded and set to DOS-ON Bank 1 selected Go into BASIC and type LOAD "0:FILE.BA" (FILE.BA is an

Re: [M100] NEC Bug?

ks 2 and 3. On Friday, June 10, 2016 11:55 AM, John R. Hogerhuis <jho...@pobox.com> wrote: On Fri, Jun 10, 2016 at 11:14 AM, Kurt McCullum <kurt.mccul...@att.net> wrote: > I've tried this on my actual machine and on Virtual-T with the exact same > results. I'm not sure wh

Re: [M100] NEC Bug?

of these bank numbers are set using the same OUT A1h opcode. Ken On Fri, Jun 10, 2016 at 12:03 PM, Kurt McCullum <kurt.mccul...@att.net> wrote: The BA file is a file first saved from the NEC. A simple program10 PRINT "HELLO"20 GOTO 10Not much to the program. It is indeed tokeniz

Re: [M100] NEC PC8300

Cost? On Friday, June 3, 2016 11:06 AM, John R. Hogerhuis wrote: On Fri, Jun 3, 2016 at 10:18 AM, Chris Fezzler wrote: > Okay.  No response to my last post. > > So I'll rephrase.  Is any interested in purchasing a mint, in-the-box, NEC > PC8300?

[M100] Adapter Board

There have been a few new adapter boards for the OptRom slot of the 100/102/200. I notice that none of them support a standard 27C256 EPROM. I know these boards used to be available, along with the wrap around flexible circuit boards used by Traveling Software. Does anybody know of an OSHPark

Re: [M100] Adapter Board

e, Jun 14, 2016 at 10:58 AM, Kurt McCullum <kurt.mccul...@att.net> wrote: > There have been a few new adapter boards for the OptRom slot of the > 100/102/200. I notice that none of them support a standard 27C256 EPROM. I > know these boards used to be available, along with the wrap arou

Re: [M100] Adapter Board

ue, Jun 14, 2016 at 11:35 AM, Kurt McCullum <kurt.mccul...@att.net> wrote: > Would it just need to be cut down to fit into a 102 or 200 optrom slot? I > suppose since the 200 has a regular socket for its main ROM it might work as > is. > > > > On Tuesday, June 14, 2016 8:20

Re: [M100] Adapter Board

dapted... m - Original Message - From: Kurt McCullum To: Model 100 Discussion Sent: Tuesday, June 14, 2016 2:30 PM Subject: Re: [M100] Adapter Board Thanks for all the information. The list is once again a wealth of knowledge. I'll look into the other boards. Kurt  On T

Re: [M100] New mComm release 0.8

Thanks for the update Daryn. On 2/6/2016 4:12 PM, Daryn Hanright wrote: MComm 0.8 works great still on Nexus 5!

[M100] UTF-8

Not to far back there was a discussion about converting non printable UTF-8 characters to readable characters on the model-t. Was a database ever created with this information? Kurt

Re: [M100] Android tablet + m100

wrote: On Friday, February 12, 2016, Kurt McCullum <kurt.mccul...@att.net> wrote: John, The drivers are built into the library I am using. It supports an Android OS as old as 3.1. Kurt Interesting. What library are you using? -- John.  

Re: [M100] Android tablet + m100

Yeah that was what kept me away from attempting mComm on Android. It was finding this library that gave me the nudge. There are some features I hope will be added such as DSR sensing which will allow me to do more through TELCOM/HTERM but it's been a stable library so far and I don't have to

Re: [M100] Android tablet + m100

Willard, Thanks for the update. I have not tried it with a Galaxy tab. I have used a Nexus 7, Motorola Moto-X, Droid Mini and have received reports about a Nexus 5. I'll look into the Galaxy. Maybe there is a setting for powering the OTG devices. I know with my phone that the FTDI chip draws

Re: [M100] Android tablet + m100

handy, check the outer two connection pins where the FTDI would plug in. Is it 5V? If not, it may be the cable. Another test would be to plug a USB flash drive into that cable and see if it powers up. If not then it's definitely a cable issue. Kurt On Friday, February 12, 2016 7:40 AM,

Re: [M100] Android tablet + m100

John, The drivers are built into the library I am using. It supports an Android OS as old as 3.1. Kurt On Friday, February 12, 2016 8:22 AM, John R. Hogerhuis wrote: It's possible that some android os's may not ship with the USB serial driver (compiled as a module

Re: [M100] Cable Update and question

Thanks John. So having CD tied to DSR pulls it low and makes it look like nothing is connected? On 2/11/2016 7:56 AM, John R. Hogerhuis wrote: DSR has to be asserted unless you have a patched client. Various programs check it to verify the cable is connected. It seems dumb to me but that's

[M100] Cable Update and question

I was testing mComm for Android last night and I pulled out my T200 to make sure it worked. It didn't. Long story short, the cable I was using for my 102 and NEC 8201 wasn't quite right for the 200. I'm using a Null modem cross over and then a 9 to 25 converter. The problem with this setup is

Re: [M100] UTF-8

<jho...@pobox.com> wrote: On Fri, Feb 5, 2016 at 3:15 PM, Kurt McCullum <kurt.mccul...@att.net> wrote: Perfect! Thanks John. Yeah the ANSI escape codes are a pain. With the Telnet/SSH bridge in mComm for Windows it ended up being a let down. Well with HTERM and a your bridge i

[M100] SAR100.CO and SARNEC.CO

Just throwing this question out one more time before I give up the search. Does ANYBODY have the RAM versions of Sardine for the 100 and NEC. Bob Pigford located the 200 version but the other two are MIA. Kurt

[M100] mComm beta is up

I finally got mComm for Android buttoned up and ready for those interested in testing it. You will need an android phone and a cable to go from the phone to your Model-T. I use a micro USB to regular USB adapter such as this one. Micro Adapter Then I

[M100] 8201a SIO 1 & 2

I was wondering if anybody knows if the SIO ports on the NEC 8201a are TTL level or regular serial level? Kurt

Re: [M100] mComm beta is up

y luck with TS-DOS or NDOS for some reason.  Tom On Wed, Jan 27, 2016 at 7:57 AM, Kurt McCullum <kurt.mccul...@att.net> wrote: I finally got mComm for Android buttoned up and ready for those interested in testing it. You will need an android phone and a cable to go from the phone to your Mo

[M100] New mComm release 0.8

I just uploaded version 0.8 of mComm to the library. This version adds TPDD2 directory support. You can create, rename and delete directories from TS-DOS/New-DOS. However, you cannot delete a folder that contains files. The Windows versions allows this so it is a difference between the two

  1   2   3   4   5   6   7   8   >