Hello,
Also, here is the stderr I received w/ ./axis 2> file.txt
*Traceback (most recent call last):*
* File "./axis", line 86, in <module>*
* import hal*
* File "/home/debian/MachineKitOne/emcapplication/lib/python/hal.py", line
30, in <module>*
* import _hal*
*ImportError: No module named _hal *
I am not sure what can remedy this issue so far.
Seth
On Thursday, March 4, 2021 at 10:54:00 PM UTC-6 Mala Dies wrote:
> Hello,
>
> *journalctl -xe:*
>
> *Mar 04 22:13:41 beaglebone rtapi:0[5253]: unload: '' not loaded*
> *Mar 04 22:13:41 beaglebone rtapi:0[5253]: unload: '' not loaded*
> *Mar 04 22:13:41 beaglebone msgd:0[5248]: rtapi_app exit detected -
> scheduled shutdown*
> *Mar 04 22:13:43 beaglebone msgd:0[5248]: msgd shutting down*
> *Mar 04 22:13:53 beaglebone dnsmasq-dhcp[1479]: DHCPREQUEST(usb0)
> 192.168.34.34 68:9e:19:8f:5f:27*
> *Mar 04 22:13:53 beaglebone dnsmasq-dhcp[1479]: DHCPACK(usb0)
> 192.168.34.34 68:9e:19:8f:5f:27 AltTiger*
> *Mar 04 22:14:45 beaglebone rtapi:0[5625]: 1:rtapi_app:5625:user
> load(sim_home_switch): sim_home_switch.so: cannot open shar*
> *Mar 04 22:14:45 beaglebone msgd:0[5620]: hal_lib:5644:user
> get_elf_section(/usr/lib/machinekit/modules/sim_home_switch.so,*
> *Mar 04 22:14:45 beaglebone rtapi:0[5625]: do_load_cmd:
> sim_home_switch.so: cannot open shared object file: No such file or*
> *Mar 04 22:14:45 beaglebone rtapi:0[5625]: 1:rtapi_app:5625:user
> do_load_cmd: sim_home_switch.so: cannot open shared object*
> *Mar 04 22:14:52 beaglebone rtapi:0[5625]: unload: '' not loaded*
> *Mar 04 22:14:52 beaglebone rtapi:0[5625]: unload: '' not loaded*
> *Mar 04 22:14:52 beaglebone rtapi:0[5625]: unload: '' not loaded*
> *Mar 04 22:14:52 beaglebone rtapi:0[5625]: unload: '' not loaded*
> *Mar 04 22:14:52 beaglebone rtapi:0[5625]: unload: '' not loaded*
> *Mar 04 22:14:52 beaglebone rtapi:0[5625]: unload: '' not loaded*
> *Mar 04 22:14:53 beaglebone msgd:0[5620]: rtapi_app exit detected -
> scheduled shutdown*
> *Mar 04 22:14:55 beaglebone msgd:0[5620]: msgd shutting down*
>
> *dmesg:*
>
> *...*
>
> *timer_probe: no matching timers found*
>
> *l4_wkup_cm:clk:0010:0: failed to disable*
>
> *OF: graph: no port node found in /ocp/lcdc@4830e000OF: graph: no port
> node found in /ocp/lcdc@4830e000OF: graph: no port node found in
> /ocp/lcdc@4830e000*
>
> *omap_voltage_late_init: Voltage driver support not added*
>
> *...*
>
> Those are my short logs where I found some issues w/ these items:
>
>
> - BeagleBone Green
> - 5" Seeed LCD Cape
> - LinuxCNC/EMCApplication/Axis
>
> So, when I run the command, *linuxcnc*, everything is in order. The GUI
> comes up, the options are there on my LCD panel, and only when I double
> click on *axis *does this error happen.
>
> The error points to a specific error code on my LCD Panel. It is a 5" LCD
> and the file that pops up will not allow me to save it. If this is a BBG
> issue, okay, I will stay w/ this thread for a while.
>
> If it is a linuxcnc/EMCApplication issue, I will go the other way and
> revisit machinekit on the google groups and their chat(s).
>
> Seth
>
> P.S. Send rations!
>
> On Saturday, February 27, 2021 at 7:06:59 PM UTC-6 ce...@tuta.io wrote:
>
>> Feb 28, 2021, 01:15 by machi...@googlegroups.com:
>>
>> > Feb 28, 2021, 01:08 by machi...@googlegroups.com:
>> >
>> >> OK,
>> >>
>> >> let's get the high ground overview and get the EMCApplication
>> installed first on AMD64 system. Only after this is done and working, we
>> will attack these other issues.
>> >>
>> >> I will use a Docker container, as it is easy to spin up and clean
>> after, but feel free to try it on a normal install (Debian) too:
>> >>
>> >> First start Docker container with passed X11 socket and DISPLAY
>> environment and DBUS socket for announcement:
>> >>
>> >> docker run -it --rm -e DISPLAY=${DISPLAY} -v
>> /var/run/dbus/system_bus_socket:/var/run/dbus/system_bus_socket -v
>> /tmp/.X11-unix:/tmp/.X11-unix -v /dev/dri:/dev/dri debian:buster bash -i
>> >>
>> >> In it prepare basic setup and test it with firefox:
>> >>
>> >> apt-get update
>> >> apt-get -y upgrade
>> >> apt-get install -y sudo
>> >> echo "ALL ALL = (ALL) NOPASSWD: ALL" >> /etc/sudoers
>> >> adduser mk
>> >> sudo apt-get install -y firefox-esr
>> >>
>> >> test with 'firefox' and you should see a firefox window appear of
>> application running in
>> >>
>> And, of course, I forgot to mention you need to switch to that non-root
>> user (otherwise you cannot connect to the DISPLAY):
>>
>> su mk
>> firefox
>>
>> and the rest of commands
>>
>>
>> >>
>> >> Docker. Then install the prerequisites for Machinekit-HAL and
>> EMCApplication:
>> >>
>> >> sudo apt-get install -y curl
>> >> curl -1sLf \
>> >> '
>> https://dl.cloudsmith.io/public/machinekit/machinekit/cfg/setup/bash.deb.sh'
>> \
>> >> | sudo -E bash
>> >> curl -1sLf \
>> >> '
>> https://dl.cloudsmith.io/public/machinekit/machinekit-hal/cfg/setup/bash.deb.sh'
>>
>> \
>> >> | sudo -E bash
>> >> curl -1sLf \
>> >> '
>> https://dl.cloudsmith.io/public/machinekit/emcapplication/cfg/setup/bash.deb.sh'
>>
>> \
>> >> | sudo -E bash
>> >>
>> >> Now we need to install that special solver we were talking about as
>> standard Debian APT cannot solve the dependencies:
>> >>
>> >> sudo apt-get install -y apt-cudf
>> >>
>> >> and install EMCApplication:
>> >>
>> >> sudo apt-cudf-get --solver aspcud -o APT::Get::Assume-Yes=1 -o
>> Debug::pkgProblemResolver=0 -o APT::Install-Recommends=0 install
>> emcapplication
>> >>
>> > Even simple:
>> >
>> > sudo apt-cudf-get --solver aspcud install emcapplication
>> > should be enough.
>> >
>> > Cern.
>> >
>> >>
>> >> and then run:
>> >>
>> >> linuxcnc
>> >>
>> >> You then should be able to see a configuration selection window,
>> select AXIS sim and run. You should see a basic simulation.
>> >>
>> >> Please confirm you can get it running.
>> >>
>> >> Cern.
>> >>
>> >>
>> >> Feb 27, 2021, 00:54 by fun...@gmail.com:
>> >>
>> >>> Hello,
>> >>>
>> >>> I few, quick references here...
>> >>>
>> >>> Would it be easier to make emcapplication once LinuxCNC is installed?
>> >>>
>> >>> Oh and...
>> >>>
>> >>> Is there a cure all outside of building the binaries from scratch?
>> >>>
>> >>> Seth
>> >>> On Wednesday, February 24, 2021 at 7:36:28 PM UTC-6 Mala Dies wrote:
>> >>>
>> >>>> Hello,
>> >>>>
>> >>>> I have been trying to install machinekit-hal and emcapplication. I
>> got some pointers here and there...
>> >>>>
>> >>>> The issue is that emcapplication does not work in my eyes yet.
>> >>>>
>> >>>> I have been unable to install it, compile it, and/or compile plus
>> install it from Cloudsmith repositories.
>> >>>>
>> >>>> So, machinekit-hal is done. I can run halcmd and halrun. This is not
>> an issue.
>> >>>>
>> >>>> Does emcapplication work yet or still? I am in the middle of a build
>> right now.
>> >>>>
>> >>>> I am installing the python2 libs. right now to handle the
>> emcapplication dependencies.
>> >>>>
>> >>>> ...
>> >>>>
>> >>>> Also, I have quickly gotten the Cloudsmith repo. items for
>> machinekit-hal and emcapplication if this will help. I can easily install
>> the .deb packages w/:
>> >>>>
>> >>>> sudo apt install ./*.deb.
>> >>>>
>> >>>> But...
>> >>>>
>> >>>> Will it work? Have you seen anything online about it working? I
>> started an issue or error source for the emcapplication online on the >>
>> github.com <http://github.com>>> repo. but deleted it (as I am too way
>> unfamiliar with this process so far).
>> >>>>
>> >>>> If you have any pointers for
>> this: linuxcnc-build-deps_2.9.0~pre0.23585.git42bf973af~buster_all.deb
>> >>>>
>> >>>> Please let me know. It seems I keep getting this repo. .deb and it
>> is not allowing me, the machine/internet/machinekit compilation, to access
>> the updated version of machinekit-hal that is current.
>> >>>>
>> >>>> Also:
>> >>>>
>> >>>> Adding a new item to changelog:
>> >>>> =================================================================
>> >>>> linuxcnc (2.9.0~pre0.23585.git42bf973af~buster) Buster; urgency=low
>> >>>>
>> >>>> * Machinekit EMCApplication is build from LinuxCNC code, but is
>> not part of
>> >>>> LinuxCNC and as such the lower entries are NOT accurate
>> >>>> * Commit: 42bf973af68d1ee4f18a3c43af15d49c0ea4bf54
>> >>>> * Merge pull request #7 from cerna/merge-21-october-2020
>> >>>> * Build as an 23585th rebuild for Debian Buster armhf
>> >>>>
>> >>>> -- xxxx xxxxxxx <>> xx...@xxxxxxx.com <>>> > Thu, 25 Feb 2021
>> 01:04:49 +0000
>> >>>> New package version number added to changelog
>> >>>> successfully configured for 'ext-hal-Debian-10'-'machinekit-hal'..
>> >>>>
>> >>>> The above pops up when I have a 'valid' install of this command:
>> >>>>
>> >>>> debian/configure
>> machinekit-hal=${WANTED_VERSION_OF_MACHINEKIT_HAL_PACKAGES} no-docs
>> >>>>
>> >>>> Then, when I apply the next command for the compilation, I receive a
>> bunch of issues/errors.
>> >>>>
>> >>>> This one:
>> >>>>
>> >>>> mk-build-deps \ --install \ --remove \ --root-cmd sudo \
>> --tool \ 'apt-cudf-get --solver aspcud -o APT::Get::Assume-Yes=1 -o
>> Debug::pkgProblemResolver=0 -o APT::Install-Recommends=0' \
>> debian/control
>> >>>>
>> >>>> Seth
>> >>>>
>> >>>> P.S. I will report the errors soon. I will run the source again once
>> compiled (if I can get it compiled) and then return service. Also, I
>> started a small set up of instructions here:
>> >>>>
>> >>>> https://gist.github.com/silver2row/8d5b8ee4d1917d896c24c24bd56ba5f4
>> >>>>
>> >>>
>> >>>
>> >>>
>> >>> --
>> >>> website: > http://www.machinekit.io> blog: >
>> http://blog.machinekit.io> github: > https://github.com/machinekit
>> >>> ---
>> >>> You received this message because you are subscribed to the Google
>> Groups "Machinekit" group.
>> >>> To unsubscribe from this group and stop receiving emails from it,
>> send an email to > machinekit+...@googlegroups.com> .
>> >>> To view this discussion on the web visit >
>> https://groups.google.com/d/msgid/machinekit/0444aa99-4a23-4c29-b55d-df15de57b36fn%40googlegroups.com
>>
>> <
>> https://groups.google.com/d/msgid/machinekit/0444aa99-4a23-4c29-b55d-df15de57b36fn%40googlegroups.com?utm_medium=email&utm_source=footer>>
>>
>> .
>> >>>
>> >>
>> >> --
>> >> website: http://www.machinekit.io blog: http://blog.machinekit.io
>> github: https://github.com/machinekit
>> >> ---
>> >> You received this message because you are subscribed to the Google
>> Groups "Machinekit" group.
>> >> To unsubscribe from this group and stop receiving emails from it, send
>> an email to machinekit+...@googlegroups.com.
>> >> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/machinekit/MU_xnEs--3-2%40tuta.io.
>> >>
>> >
>> > --
>> > website: http://www.machinekit.io blog: http://blog.machinekit.io
>> github: https://github.com/machinekit
>> > ---
>> > You received this message because you are subscribed to the Google
>> Groups "Machinekit" group.
>> > To unsubscribe from this group and stop receiving emails from it, send
>> an email to machinekit+...@googlegroups.com.
>> > To view this discussion on the web visit
>> https://groups.google.com/d/msgid/machinekit/MU_zFlG--3-2%40tuta.io.
>> >
>>
>>
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to machinekit+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/machinekit/b2587ef3-6b8d-49ca-9331-76a9b4e60bcbn%40googlegroups.com.
