I am using Vectric Cut2d for my designs and have been using EMC2 post
processors for the g code creation. Everything works except that the
text on engravings are somewhat distorted, ie a straight line on the bottom
of an "L" is curved. Also circles are not complete, there is a very small
Now I am trying to created a bootable image following Robert Nelson's
instructions. (Whoa is me!) Where does the .rbf file go? In the rootfs or
in the A2 partition?
The u-boot-with-spl.sfp goes in the A2 partition, does it pick up the
kernel from the rootfs partition?
Alan
On Monday, July
Thank for your answer.
> Because you have changed one but not the other.
> You have 2 different machinekit installations, one in the binary file
> system and another, *which you built*, in your home directory.
>
> If you want to test your new *kins, run the one which contains it, in your
>
On 15/08/17 03:29, thangle wrote:
The module appears to have built from your printout, but you
also look to be building a RIP and then executing a binary
installation
Look at the rpath