Hi,
From one of the previous posts:
=
add a swap file first:
dd if=/dev/zero of=my_swap bs=1024 count=524288
mkswap my_swap
sudo chown root my_swap
sudo chmod 600 my_swap
sudo swapon my_swap
you can make the file permanent by a
could you please tell me how to set the swap file properly
>
> On Friday, March 31, 2017 at 1:29:32 PM UTC-7, ceha...@gmail.com wrote:
>>
>> I just checked which image I have on my BBB, and it is the 1-30-2017
>> release. My notes had the 3-15-17 release specified, but while that
>> compiled
Hi,
Thanks, I got it to compile. I needed to set the swap file properly. I
didn't get it properly set up the last time, and I wasn't sure if it was
*needed*, but it is. I had compiled machinekit on the BBB a couple of
years ago and it wasn't needed back then, but I guess *a lot* has chang
I just checked which image I have on my BBB, and it is the 1-30-2017
release. My notes had the 3-15-17 release specified, but while that
compiled, it would not run. I think the 2-12-17 release works though.
Sorry for any confusion.
On Friday, March 31, 2017 at 4:21:42 PM UTC-4, ceha...@gmail
I've compiled on beaglebone using these steps. The process runs much
faster when running out of EMMC, so I recommend that you flash your SD card
image onto the BBB, otherwise it will take hours.
The swapfile is necessary as you've noted. My first compile failed in the
same way but I had anot