Thanks got it fixed, finely after many months of working on machinekit with cramps i seem to have it running with machineface yesterday got the full machineface with machinekit-client display working with the heaters and fans so till i mess something up i should be good to go.. Thanks for all your help
Gary On Monday, February 12, 2018 at 11:28:34 AM UTC-5, gary wrote: > I am getting an error lineardelta.hal:739: parameter or pin > 'hpg.pwmgen.00.out.04.pin' not found > can't seem to find the error or why the pin is not found i have it set > got it here first then commented it out > # E2 Heater FET 4 > #setp hpg.pwmgen.00.out.03.pin 921 > #setp hpg.pwmgen.00.out.03.enable 1 > #setp hpg.pwmgen.00.out.03.value 0.0 > > now getting it at next one in line the fan 'hpg.pwmgen.00.out.04.pin' not > found > > The bed, E0 and E1 are not having a pin problem > > its with a cramps.hal I have used this config setup before no problem > i am running, run.py and loading the cramps_bbio > > any suggestions as where to look for the pin problem? > > Thanks gary > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
