I'm getting back into Machinekit and am looking for recommendations for a
configuration for use with the 3 axis MPCNC router. Most MPCNC builders use
a RAMPS board and run either Marlin or GRBL. I have been using LinuxCNC but
want to try something closer to the RAMPS configuration for another build.
What I am hoping to get is a recommendation on a stable, not bleeding edge,
configuration that is a typical Machinekit setup. I have in mind using a
Beaglebone Black rev C, CRAMPS 2.2 and a recent release of Jessie. I get
the impression that Stretch needs a bit more work to be considered stable.
I'm not sure if I should use an HTML monitor or a remote configuration and
would appreciate suggestions. I would consider other hardware
configurations that can drive 5 nema17 steppers but I am looking for a
mainstream solution. Also which is the better choice, the Xenomai or
RT_PREEMPT real-time kernel? Sorry for lots of questions but hopefully this
makes sense.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
