On Wed, Aug 3, 2011 at 00:50, Scott Webster wrote:
> On Tue, Aug 2, 2011 at 9:45 PM, Brandon Allbery
> wrote:
> > There are plenty of pastebins out there that will let you paste fairly
> big
> > logs and then paste the resulting URL into a list message.
>
> Good point! Ok, so, "let it be known"
On Tue, Aug 2, 2011 at 9:45 PM, Brandon Allbery wrote:
> There are plenty of pastebins out there that will let you paste fairly big
> logs and then paste the resulting URL into a list message.
Good point! Ok, so, "let it be known" that anyone referring to a log
should always post it on the web s
On Wed, Aug 3, 2011 at 00:16, Scott Webster wrote:
> While I don't necessarily disagree with keeping list traffic small (though
> perhaps small is relative these days), I asked for the logs because often
> it's impossible to help without them. Do or should we have a policy of
> "only post compre
While I don't necessarily disagree with keeping list traffic small (though
perhaps small is relative these days), I asked for the logs because often
it's impossible to help without them. Do or should we have a policy of
"only post compressed logs" or, never post logs? Obviously if it's a bug
then
On Aug 2, 2011, at 16:58, Luke Thomas Mergner wrote:
> Per a request I uploaded the log files but they are being held for moderation.
I rejected your email because it was too large. Many people subscribe to this
list and most will not be interested in your logs. I suggest you file a bug
report
Hi,
Per a request I uploaded the log files but they are being held for moderation.
After looking through known Lion bugs, it turns out that dbus won't build at
all yet. Not sure about neon.
In any case, I'm following the official migration advice now:
https://trac.macports.org/wiki/Migrati
On Tue, Aug 2, 2011 at 2:44 PM, Luke Thomas Mergner wrote:
> Hi,
> On 10.7 and Macports 2.0.1, I've had build failures on both neon and dbus.
> I'm not a programmer so looking at the log files, which I've done, doesn't
> help me figure out what's going on. I've tried to run 'port clean' on both
Hi,
On 10.7 and Macports 2.0.1, I've had build failures on both neon and dbus. I'm
not a programmer so looking at the log files, which I've done, doesn't help me
figure out what's going on. I've tried to run 'port clean' on both before
attempting to upgrade them again without any improvement.
