Installing Apache2 on Leopard
I have successfully accomplished this... but frankly the process just doesn't sit well with my sense of things.. I now have two complete Apache installations... and have to do work arounds to get the port installation to work (apache2ctl etc) Isn't there away to install the port version over the orginal installation? it just seems the more orderly way of doing things ___ macports-users mailing list macports-users@lists.macosforge.org http://lists.macosforge.org/mailman/listinfo.cgi/macports-users
Re: error apache2 from macports 1.70 (RESOLVED)
OK I deinstalled and re-installed. Although I had done this before this time was much different and worked great I have two machines really interlaced so I guess I screwed up along the way thanks for the help... Jason On Jan 18, 2009, at 11:53 PM, Ryan Schmidt wrote: On Jan 18, 2009, at 21:23, Jason Hirsh wrote: On Jan 18, 2009, at 7:54 PM, Bryan Blackburn wrote: On Sun, Jan 18, 2009 at 07:12:45PM -0400, Jason Hirsh said: sh: /opt/local/bin/bzip2: Bad CPU type in executable Was this MacPorts install copied over from a different architecture (eg from a PowerPC to Intel)? presuming wrong type howdoI correct sudo port -nf upgrade bzip2 That will cause bzip2 to be rebuilt. But if you copied this MacPorts installation from another machine, it's likely most or all of your other ports are also affected by this problem and you should do the same for all of them. But you would have to do it in the right order. It may be easier to uninstall all ports first, then install again what you need, which will do it in the right order for you. ___ macports-users mailing list macports-users@lists.macosforge.org http://lists.macosforge.org/mailman/listinfo.cgi/macports-users
Re: error apache2 from macports 1.70
On Jan 18, 2009, at 7:54 PM, Bryan Blackburn wrote: On Sun, Jan 18, 2009 at 07:12:45PM -0400, Jason Hirsh said: [...] Ok ther still seems to be an issue with that configure directory not being created I took a llok and I have nothing in the tree under work in the path shown in the error [Bluefish:/opt/local] jason% sudo port -d extract apache2 [...] DEBUG: setting option extract.cmd to /opt/local/bin/bzip2 ---> Extracting apache2 DEBUG: Executing org.macports.extract (apache2) ---> Extracting httpd-2.2.11.tar.bz2 DEBUG: setting option extract.args to /opt/local/var/macports/ distfiles/apache2/httpd-2.2.11.tar.bz2 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_www_apache2/work" && /opt/local/bin/ bzip2 -dc /opt/local/var/macports/distfiles/apache2/httpd-2.2.11.tar.bz2 | /usr/bin/gnutar --no-same-owner -xf -' sh: /opt/local/bin/bzip2: Bad CPU type in executable Was this MacPorts install copied over from a different architecture (eg from a PowerPC to Intel)? Odd though that it continued on after that as it should have failed at this point instead of continuing. Bryan presuming wrong type howdoI correct [...] ___ macports-users mailing list macports-users@lists.macosforge.org http://lists.macosforge.org/mailman/listinfo.cgi/macports-users ___ macports-users mailing list macports-users@lists.macosforge.org http://lists.macosforge.org/mailman/listinfo.cgi/macports-users
Fwd: error apache2 from macports 1.70
Begin forwarded message: From: Jason Hirsh Date: January 18, 2009 5:59:06 PM GMT-04:00 To: Bryan Blackburn Subject: Re: error apache2 from macports 1.70 On Jan 18, 2009, at 5:29 PM, Bryan Blackburn wrote: On Sun, Jan 18, 2009 at 05:13:23PM -0400, Jason Hirsh said: I am trying to install Apache 2.0 on a Power Mac G5 running Leopard 10.5.4 I get the folowing error ---> Fetching apache2 ---> Attempting to fetch httpd-2.2.11.tar.bz2 from http://www.ibiblio.org/pub/mirrors/apache/httpd ---> Verifying checksum(s) for apache2 ---> Extracting apache2 Error: reinplace: couldn't read file "/opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_www_apache2/work/httpd-2.2.11/ configure": no such file or directory Error: Target org.macports.extract returned: reinplace sed(1) failed Error: Status 1 encountered during processing. It would seem there is an issue with the what I fetched?? If the file downloaded wasn't right, it would have failed during the checksum, so the download should be okay. Try running $ sudo port clean --work apache2 $ sudo port -d extract apache2 and see if that gives us some more information on what's going on. FWIW, I have that version of apache2 installed here without such issues. Bryan Ok ther still seems to be an issue with that configure directory not being created I took a llok and I have nothing in the tree under work in the path shown in the error [Bluefish:/opt/local] jason% sudo port -d extract apache2 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/apache2 DEBUG: Changing to port directory: /opt/local/var/macports/sources/ rsync.macports.org/release/ports/www/apache2 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Requested variant powerpc is not provided by port apache2. DEBUG: Requested variant macosx is not provided by port apache2. DEBUG: Executing variant darwin provides darwin DEBUG: Executing variant darwin_9 provides darwin_9 DEBUG: Executing org.macports.main (apache2) ---> Fetching apache2 DEBUG: Executing org.macports.fetch (apache2) ---> Verifying checksum(s) for apache2 DEBUG: Executing org.macports.checksum (apache2) ---> Checksumming httpd-2.2.11.tar.bz2 DEBUG: Correct (md5) checksum for httpd-2.2.11.tar.bz2 DEBUG: Correct (sha1) checksum for httpd-2.2.11.tar.bz2 DEBUG: Correct (rmd160) checksum for httpd-2.2.11.tar.bz2 DEBUG: setting option extract.cmd to /opt/local/bin/bzip2 ---> Extracting apache2 DEBUG: Executing org.macports.extract (apache2) ---> Extracting httpd-2.2.11.tar.bz2 DEBUG: setting option extract.args to /opt/local/var/macports/ distfiles/apache2/httpd-2.2.11.tar.bz2 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.5' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_www_apache2/work" && /opt/local/bin/ bzip2 -dc /opt/local/var/macports/distfiles/apache2/ httpd-2.2.11.tar.bz2 | /usr/bin/gnutar --no-same-owner -xf -' sh: /opt/local/bin/bzip2: Bad CPU type in executable DEBUG: Executing proc-post-org.macports.extract-extract-0 DEBUG: couldn't read file "/opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_www_apache2/work/httpd-2.2.11/ configure": no such file or directory while executing "exec /usr/bin/sed {s|-export-symbols-regex ssl_module||g} < /opt/ local/var/macports/build/ _opt_local_var_macports_sources_rsync.macports.org_release_p..." ("eval" body line 1) invoked from within "eval exec $cmdline" Error: reinplace: couldn't read file "/opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_www_apache2/work/httpd-2.2.11/ configure": no such file or directory Error: Target org.macports.extract returned: reinplace sed(1) failed Warning: the following items did not execute (for apache2): org.macports.extract Error: Status 1 encountered during processing. Its probably me... but can't figure how I screwed up ___ macports-users mailing list macports-users@lists.macosforge.org http://lists.macosforge.org/mailman/listinfo.cgi/macports-users ___ macports-users mailing list macports-users@lists.macosforge.org http://lists.macosforge.org/mailman/listinfo.cgi/macports-users
error apache2 from macports 1.70
I am trying to install Apache 2.0 on a Power Mac G5 running Leopard 10.5.4 I get the folowing error ---> Fetching apache2 ---> Attempting to fetch httpd-2.2.11.tar.bz2 from http://www.ibiblio.org/pub/mirrors/apache/httpd ---> Verifying checksum(s) for apache2 ---> Extracting apache2 Error: reinplace: couldn't read file "/opt/local/var/macports/build/ _opt_local_var_macports_sources_rsync .macports.org_release_ports_www_apache2/work/httpd-2.2.11/configure": no such file or directory Error: Target org.macports.extract returned: reinplace sed(1) failed Error: Status 1 encountered during processing. It would seem there is an issue with the what I fetched?? ___ macports-users mailing list macports-users@lists.macosforge.org http://lists.macosforge.org/mailman/listinfo.cgi/macports-users
{solved}Re: Apache Apache 2.2.8 install fails -Error: Target org.macports.fetch returned: fetch failed
On Jun 14, 2008, at 6:36 PM, Rainer Müller wrote: > JasonHirsh wrote: >> I have verified that my macports is up to date... any ideas?? > > The file moved on the server. Use this command: > > $ sudo env MASTER_SITE_LOCAL=http://distfiles.macports.org/apache2 > port -v fetch apache2 > > Rainer that did it ___ macports-users mailing list macports-users@lists.macosforge.org http://lists.macosforge.org/mailman/listinfo.cgi/macports-users