iMac late 2009 memory upgrade

2011-06-10 Thread Vince Mistretta
Hi, Is there more than two screws on bottom memory door? I loosened the two screws on either side but find it still is being hindered by something in the middle. -- You received this message because you are subscribed to the Google Groups MacVisionaries group. To post to this group, send

Re: iMac late 2009 memory upgrade

2011-06-10 Thread Jonathan Cohn
Just to be sure we are on the same page… On my MacBook where there is a coin slot to unlock the battery, there is a ram/HD area behind a alumium panel. This panel is attached with three philips screws according to Apple documentation. Jonathan Cohn On 10/06/2011, Vince Mistretta

Re: iMac late 2009 memory upgrade

2011-06-10 Thread Vince Mistretta
I'm referring to the iMac as in the subject not a MBP. Thanks On Jun 10, 2011, at 12:47 PM, Jonathan Cohn wrote: Just to be sure we are on the same page… On my MacBook where there is a coin slot to unlock the battery, there is a ram/HD area behind a alumium panel. This panel is attached

Re: iMac late 2009 memory upgrade

2011-06-10 Thread Esther
Hi Vince, I don't know the iMac layout, but Apple's support pages gives full information on how to perform memory upgrades and disk installations (on computer and laptop models where this is relatively easy to access). Go to the Knowledge Base Article on iMac: How to remove or install memory:

Re: iMac late 2009 memory upgrade

2011-06-10 Thread Vince Mistretta
Thanks, but I did that and it says to remove screws - not how many for my model. Most 27 inch seem to have two screws which Idid loosen, but there seems to be something else there which is not described. It might be in a diagram, but not described in words. That's why I'm asking here in case

Re: iMac late 2009 memory upgrade

2011-06-10 Thread Esther
Hi Vince, Just after the step about removing the screws, the instructions on the Apple Knowledge Base article page say: Untuck the tab in the memory compartment. If you are replacing a memory module, gently pull the tab to eject any installed memory module. Did you try to feel around for any

Re: iMac late 2009 memory upgrade

2011-06-10 Thread Vince Mistretta
Ester, I'm not even at that step. It's the compartment door I'm referring to. It is sticking in the center and I can't seem to get it loosened up. In the center there seems to be a very small item loosely moving in and out when I move my fingers over the area, but can't figure if it's

Re: iMac late 2009 memory upgrade

2011-06-10 Thread Esther
Hi Vince, According to the iFixit site for the 27 iMac 2009 model, there are 3 screws to the compartment door, and you use a Phillips #1 size screwdriver to open it. I'll paste in the text of their instructions and then give you the link to the page: begin quote Step 1 — Access Door

Re: iMac late 2009 memory upgrade

2011-06-10 Thread Vince Mistretta
Figures, it takes another site to explain there's three screws nottwo. Thanks Ester.. On Jun 10, 2011, at 4:19 PM, Esther wrote: Hi Vince, According to the iFixit site for the 27 iMac 2009 model, there are 3 screws to the compartment door, and you use a Phillips #1 size screwdriver to