Hi,
Hilton == Hilton J Ralphs [EMAIL PROTECTED]
on Wed, 5 May 2004 19:50:40 +0200 writes:
Hilton That's the problem, you simply edited the list information bit.
Hilton, you misunderstood:N
I did what every list maintainer is supposed to do:
Goto
Franco, Ruben [EMAIL PROTECTED] writes:
I have a list admin that wishes to delete all archives for a
particluar list but the admin interface does not have such an
option. Can I simply delete the files found in the archives
sub-directory?
No. But you can delete the
At 9:08 PM -0600 2004/05/05, Kory Wheatley wrote:
Any Solution? I know you will want to say change your policy on your
mail server, but at this point it's not a option.
As you have observed, the standard place to fix this problem is
in the mail server. It is not unusual to have a separate
Hello,
I am sure this has already been addressed but I couldn't seem to get it
sorted out form the archives.
What I need is a footer or my choosing to be on every email that goes out.
I typed in what I wanted in the digest and non digest admin area,
But when I send out emails, the footer is not
We run an announcement only list of about 25K members on a IBM Netfinity
5500 (1 GB RAM) running SuSE 8.0.
Mailman 2.1.4 performs very well except for the web interface which is
slow at the best of times and can even time-out during an active mail shot.
This is a snapshot of ps aux showing a
Hi,
to these lists are moderated. Here's the problem, when some of these
pending messages are accepted to be sent, and one of the messages
happens to be 5mb in size, that amount of email that is sent to our mail
server all at once, kills us, and someday if a larger one is sent, it
will fill
John wrote on Wed, 5 May 2004 08:04:23 -0700:
Is there any way, in a mass subscription txt file containing 'real-name
email-addr ' to turn the MODerator option on at the same time? Doing it
manually is a chore, as I have all MOD bits set to off in my list.
not sure what you mean. Do you want
Ralph Siemsen wrote on Tue, 04 May 2004 14:42:34 -0400:
Is it possible to manually dump the database of list members, remove the
offending email addresses, and then undump the database?
list_members is possibly what you want to use.
Kai
--
Kai Schätzl, Berlin, Germany
Get your web at
Let me start by saying that I don't know much about mailman. I use the
version that comes with Mac OS X server and it's worked fine until
yesterday. All of a sudden, though, messages aren't getting through.
I poked around and the messages are received OK, but they are sitting
in
At 11:04 AM 5/5/2004, you wrote:
Is there any way, in a mass subscription txt file containing 'real-name
email-addr ' to turn the MODerator option on at the same time? Doing it
manually is a chore, as I have all MOD bits set to off in my list.
In the web interface, under Privacy options.../Sender
Hi all,
Is it possible with Mailman 2.1.4-1 to change user settings from a
command line tool? For example set nomail to 1 for a user on a mailing
list? I looked in the bin directory and none of the utilities appear to
be designed to do this, does anyone have any suggestions?
Tia
Regards
Geoff
Hello,
I did a fresh install of version 2.1.4
Installation went fine browser is up
Cron is running aliases is set
Sending a mail to the list is picked up but doesnt be processed.
Sendmail says:
May 6 16:32:28 www sendmail[19329]: i46EWRA19328:
to=|/home/mailman/mail/mailman post netwerk,
Sorry to bother you, but I can't find an answer to my question and have not
gotten a response from a couple other emails to other people.
I am the moderator of a list and need to be able to send out emails to the
list from me as a moderator with out it having to be approved first. I
just want
Is there an option or a way to have mailman create digests of only the
subject line with a link to the message in the archive?
We are receiving multiple messages a day that we need to archive, but we
will normally only be interested in a few of them. Some of the messages are
large, so I don't
Hello-
In the digests for my list, I am getting unwanted
headers, i.e.
To: [To header omitted]
Message-ID:
[EMAIL PROTECTED]
Content-Type: text/plain; charset=us-ascii;
format=flowed
I placed the following in mm_cfg.py:
MIME_DIGEST_KEEP_HEADERS = ['message', 'date', 'from',
'subject']
- Original Message Follows -
From: Sacha H. Dick [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [Mailman-Users] Moderator
Date: Wed, 5 May 2004 13:10:48 -0500
Sorry to bother you, but I can't find an answer to my question and have not
gotten a response from a couple other emails to
Hi,
I'm running a list on Mailman 2.1.3 and I am looking to secure my list as
much as possible. I saw this in FAQ 3.11
(http://www.python.org/cgi-bin/faqw-mm.py?req=showfile=faq03.011.htp):
A more secure alternative is for your approved posters to add an
Approved header to their postings
What about the stuff in $MAILMANHOME/archives/public/$LISTNAME?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Detlef Neubauer
Sent: Thursday, May 06, 2004 1:37 AM
To: [EMAIL PROTECTED]
Subject: Re: [Mailman-Users] Delete list archives
Franco, Ruben
Steffan Noord wrote:
I did a fresh install of version 2.1.4
Installation went fine browser is up
Cron is running aliases is set
That version runs as a daemon, not from cron - did you do
[prefix/mailman/ bin/mailmanctl start?
Paul
--
At 1:10 PM -0500 2004/05/05, Sacha H. Dick wrote:
I am the moderator of a list and need to be able to send out emails to the
list from me as a moderator with out it having to be approved first. I
just want to send it directly.
If you're the moderator, then your address should be on the
At 4:48 AM -0500 2004/05/06, Sean Carnahan wrote:
What I need is a footer or my choosing to be on every email that goes out.
No problem. Standard feature of Mailman.
I typed in what I wanted in the digest and non digest admin area,
But when I send out emails, the footer is not there
What
Some time ago I setup mailman, followed some instructions on creating the
mailman site list. Now I find I can't access its admin page and I'm not sure
what I did. Each time I try to get to the admin page of the mailman list I am
redirected back to the list index page for all of the lists.
Any
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Kevin W. Gagel wrote:
Some time ago I setup mailman, followed some instructions on
creating the mailman site list. Now I find I can't access its admin
page and I'm not sure what I did. Each time I try to get to the
admin page of the mailman list I
Is it possible to change the web_page_url parameter using the
mailman/admin/listname website?
If so, where... I don't see it.
If not, how do I change it?
Thanks,
/edg
Ed Greenberg
--
Mailman-Users mailing list
[EMAIL PROTECTED]
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Ed Greenberg wrote:
Is it possible to change the web_page_url parameter using the
mailman/admin/listname website?
Not in 2.1.
If not, how do I change it?
fix_url.py will help you. See also the FAQ entry:
4.29. Where can I change a list or
On Thu, May 06, 2004 at 07:16:39PM +0200, Brad Knowles wrote:
At 1:10 PM -0500 2004/05/05, Sacha H. Dick wrote:
I am the moderator of a list and need to be able to send out emails to the
list from me as a moderator with out it having to be approved first. I
just want to send it directly.
Hello all.
I see one bug in my general list information page
http://schooner.coastlandtech.com/mailman/listinfo/speleo-info
Each time when user look this page, it is in ASCII-USA charecter coding, not in
correct Cyrillic (KOI-8R).
So russian (cyrillic) text in the page is unreadable...
The
Hello did a new install of mailman 2.1.4
now cron gives this error
File /home/mailman/cron/qrunner, line 96
print fd, _(__doc__)
^
SyntaxError: invalid syntax
any idees
--
Mailman-Users mailing list
[EMAIL PROTECTED]
I have a Linux server running Mailman, Postfix and Fetchmail. I'm
running this at home for a small sailing club, with approximately 10
messages/day. The problem is that I have dynamic IP, and only a
no-ip.com basic account.
But the sailing club is so lucky that they have a domain, a
Sean wrote on Thu, 6 May 2004 12:12:18 -0400 (EDT):
A more secure alternative is for your approved posters to add an
Approved header to their postings as a header, or as the first line of
the post).
I'd like to implement this but I'm uncertain to go about it. I'm pretty
certain the
Guys,
when i run the command:
./configure --with-mail-gid=some_user
on a system previously installed, it isn't working. The user isn't changed,
and i get the following error when i send an email to a test list:
[EMAIL PROTECTED]: Command died with status 2:
/usr/local/mailman/mail/mailman
At 10:19 PM +0200 2004/05/06, Håkon Strandenes wrote:
How can I set up mailman/postfix to get mails form another, external
pop3 account via fetchmail? I've already made the pop3 accounts, like
[EMAIL PROTECTED], [EMAIL PROTECTED] etc. But how do I
configure fetchmail, postfix and mailman?
On 6 May 2004, at 21:12, Steffan wrote:
Hello did a new install of mailman 2.1.4
now cron gives this error
File /home/mailman/cron/qrunner, line 96
print fd, _(__doc__)
^
SyntaxError: invalid syntax
any idees
what version of python are you running? the README says
quote
On 6 May 2004, at 21:27, Ignacio M. Sbampato wrote:
Guys,
when i run the command:
./configure --with-mail-gid=some_user
on a system previously installed, it isn't working.
Have you run make install after running ./configure?
Simply running configure will not change a previously/already
On 6 May 2004, at 22:00, tikkliknl wrote:
Well it was a new install, but there was an old not used version
pressent.
i installed python 2.3.3
Did you install it in the same location as and replacing any previous
version of python on the system?
looking at ps -aux i see this:
mailman 28884
Hi,
I set up mailman. The list is meant to be send only, all emails being
moderated. The moderation flag is set for all email addresses.
When I send an email to the list it goes into the queue. I then go into
Administrative requests for mailing list and see Posting Held for
Approval. Then I
I have a home network with a windows server plus a linux box as a postfix mail server.
The linux box is also my firewall / router so it gets my static IP and an inside IP
as the gateway (192.168.1.1). Mailman is running and I created a list. I can go to
Franco, Ruben wrote:
What about the stuff in $MAILMANHOME/archives/public/$LISTNAME?
Because the path to the Mailman install can vary, it's given as
something like $MAILMANHOME or prefix. Likewise $LISTNAME or listname
indicates the name of a list.
Paul
Hi,
Can anyone point me in the direction of a good troubleshooting guide for pin
pointing problems with mailman? Specifically, it not delivering to a single
subscribed user?
We run about 55 sperate lists, they're all working perfectly, except for one
subscriber who doesn't get anything
Hello
I have a quick question, was wondering how I could change user settings
(such as nomail to 1) from a script or command line utility rather than
the web interface? I am using Mailman version 2.1.4-1. I looked in
/var/mailman/bin directory, none of the utilities there appear to be
able to do
On May 6, 2004, at 06:40, NFN Smith wrote:
I've checked all of my logs, including /var/log/maillog and
/var/log/mailman/*, and there are no updates to any of these logs
following gate_news runs.
What about your news log files (typically in /var/log/news/*)? Do they
show Mailman successfully
On May 6, 2004, at 17:25, Geoff Powell wrote:
Is it possible with Mailman 2.1.4-1 to change user settings from a
command line tool? For example set nomail to 1 for a user on a mailing
list? I looked in the bin directory and none of the utilities appear to
be designed to do this, does anyone have
42 matches
Mail list logo