[Mailman-Users] Help with one of Mark's scripts

I'm trying to run the nonmembers_modify-py script here https://www.msapiro.net/scripts/non_members but keep getting the error that the lists are non-existent. I’m trying to add a non-member accept to a bunch of our Class_of lists: [root@dhbmailman1 bin]# ./list_lists | grep Class

[Mailman-Users] Help with header Approved moderate message

Hi: Can you change the header "Approved: password" for the approval of moderated messages, and change it to another word? For example, approve moderated messages with the word "OK" and without having to specify a password. Thank you so much. Regards.

[Mailman-Users] Help with 'The message has no valid senders'

We recently installed Mailman 3 to replace an existing Mailman 2 installation with a large number of lists and users. I'm now seeing a number of users on specific lists whose posts result in: May 18 14:25:41 2021 (112570) DISCARD: ; ['The message has no valid senders'] The post have sender

[Mailman-Users] Help with archive

Hello Mark, I am trying to remove the archives older than 2 years by using the following python script. But, it works for 365 days only. any other possibilities to use this script for 2 years. https://www.msapiro.net/scripts/prune_arch -- Regards, Sundar

[Mailman-Users] Help with Topics

I'm trying to set up Topics for a Mailman 2.1.33 list I administer, and I'm a tad confused. There appears to be no combination of options to allow a member of a list to see _only_ non-topic-specific postings. If you select one or more topics of interest, you will receive the postings under

[Mailman-Users] Help with Topics

[Re-sent after not getting my copy back from the listserver after five hours.] I'm trying to set up Topics for a Mailman 2.1.33 list I administer, and I'm a tad confused. There appears to be no combination of options to allow a member of a list to see _only_ non-topic-specific postings.

Re: [Mailman-Users] help

Mailman FAQ: http://wiki.list.org/x/AgA3 -- Mailman-Users mailing list Mailman-Users@python.org https://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://wiki.list.org/x/AgA3 Security Policy: http://wiki.list.org/x/QIA9

[Mailman-Users] help

help -- Mailman-Users mailing list Mailman-Users@python.org https://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://wiki.list.org/x/AgA3 Security Policy: http://wiki.list.org/x/QIA9 Searchable Archives:

Re: [Mailman-Users] Help needed using postfix as an outbound gateway for Mailman

On 11/15/2018 10:17 AM, David Gibbs wrote: And, yes, I know that I could use postfix as both the inbound & outbound mail server ... which I probably should do, but I'm far more familiar with using sendmail and have it setup & working fine on my current list server. I decided to bite the bullet

Re: [Mailman-Users] Help needed using postfix as an outbound gateway for Mailman

On 11/15/18 8:17 AM, David Gibbs wrote: > > The problem is, I'm seeing this in my mail log... > > Nov 15 15:41:43 lists postfix/smtp[18136]: AA76A61E61: > to=, relay=none, delay=0.01, > delays=0/0/0/0, dsn=5.4.6, status=bounced (mail for localhost loops back > to myself) > > It _appears_ that

[Mailman-Users] Help needed using postfix as an outbound gateway for Mailman

Folks: I need some help diagnosing a problem using postfix as my outbound mail server with Mailman. Up front I want to say, I have this working FINE with my current mailman list server. I'm in the process of moving my list server to an AWS lightsail instance. And, yes, I know that I could

Re: [Mailman-Users] help setting up mailman

Hi Matthew, I would strongly suggest having your own local storage space for this. However, I would recommend reading the documentation pertaining to system requirements before proceeding. On Wed, Sep 19, 2018 at 11:26 AM Matthew Draft wrote: > Hi, > I'm new to mailman and could use some

Re: [Mailman-Users] help setting up mailman

On Tue, 2018-09-18 at 08:47 -0400, Matthew Draft wrote: > Hi, > I'm new to mailman and could use some advise as far as setting up a > new listserv.  Do I need to rent server space to hold the list data? Hi, If you don't want to rent a server and install and maintain mailman, you can find a list

Re: [Mailman-Users] help setting up mailman

Hello, On 9/18/2018 5:47 AM, Matthew Draft wrote: I'm new to mailman and could use some advise as far as setting up a new listserv. Do I need to rent server space to hold the list data? It depends You can hire a setup from some ISPs which are ready to go, otherwise, you need a system to

Re: [Mailman-Users] help setting up mailman

Matthew Draft writes: > Hi, > I'm new to mailman and could use some advise as far as setting up a new > listserv. Do I need to rent server space to hold the list data? Probably. You will need some form of hosting or you will need a dedicated IP and your own server that you can manage and keep

[Mailman-Users] help setting up mailman

Hi, I'm new to mailman and could use some advise as far as setting up a new listserv. Do I need to rent server space to hold the list data? Matt -- Mailman-Users mailing list Mailman-Users@python.org

Re: [Mailman-Users] Help with mailman instance in broken state

On 5/15/18 10:27 AM, Kevin Bowen wrote: > >> What's in the various mailman/qfiles/* queues. > > I don't seem to have that directory? I'm running v2.1.9 on RHEL5, do you > know where it would be located? In RHEL, it's /var/spool/mailman/ (see ). >> What's in

Re: [Mailman-Users] Help with mailman instance in broken state

So the issue seems to have resolved itself over night - there's no longer a qrunner process taking 99% cpu, the list's admin interface is accessible, and it's no longer rewriting its config.pck every few seconds, so I think that means the list is now fine (although there hasn't yet been any

Re: [Mailman-Users] Help with mailman instance in broken state

On 5/14/18 7:26 PM, Kevin Bowen wrote: > When I look in > /var/lib/mailman/lists/, > I can see that mailman is continually rewriting config.pck every few > seconds. I think the "duplicate" post I rejected mentioned a qrunner at 99% cpu. Which runner? What's in the various mailman/qfiles/*

[Mailman-Users] Help with mailman instance in broken state

My mailman instance (2.1.9) has gotten into a funky broken state where one of my lists has become inoperable, with a message which should be awaiting moderation, but the moderator never got notified. The list's config appears to be corrupt - attempting to load the admin web interface results in a

Re: [Mailman-Users] Help - Subscribe/unsubscribe broken

On 03/27/2018 07:01 AM, Jeff Polasek via Mailman-Users wrote: > Howdy, > I recently updated from mailman 2.1.? to 2.1.26.  After this update users can > not subscribe or unsubscribe.  Here is the error from the mailman log.  Any > ideas what I need to fix?  It may be a database problem? > Thanks

[Mailman-Users] Help - Subscribe/unsubscribe broken

Howdy, I recently updated from mailman 2.1.? to 2.1.26.  After this update users can not subscribe or unsubscribe.  Here is the error from the mailman log.  Any ideas what I need to fix?  It may be a database problem? Thanks Jeff Mar 27 08:57:49 2018 admin(21493):

Re: [Mailman-Users] HELP! Just broke Mailman with a bogus list.

Mark Sapiro recently wrote... I would be interested in knowing what's wrong and how it happened. Unfortunately, this issue probably prevents even running withlist on this list. I.e., Mailman's 'bin/withlist LISTNAME' will probably throw the same error. It does. I did try compiling the

Re: [Mailman-Users] HELP! Just broke Mailman with a bogus list.

On 03/07/2018 10:31 AM, The Mailing List Server Admin wrote: > I just added a new list where I wanted to experiment with the > topics feature.  But after adding the list, the list_lists > utility no longer works: > >> Traceback (most recent call last): >>   File

[Mailman-Users] HELP! Just broke Mailman with a bogus list.

I just added a new list where I wanted to experiment with the topics feature. But after adding the list, the list_lists utility no longer works: Traceback (most recent call last): File "/home/mladmin/Util/MM2/list_lists", line 130, in main() File "/home/mladmin/Util/MM2/list_lists",

Re: [Mailman-Users] Help with installation

On 02/24/2016 08:52 AM, Ibrahim Jarif wrote: > > I'm to setup mailman as per this link > http://wiki.list.org/HyperKitty/DevelopmentSetupGuide We are working on setting up mailman-users at mailman3.org (running on MM 3 of course), but we're not quite there yet. In the mean time the best list

[Mailman-Users] Help with installation

Hi, I'm Ibrahim ! I'm to setup mailman as per this link http://wiki.list.org/HyperKitty/DevelopmentSetupGuide The documentation asks to setup hyperkitty using this link https://hyperkitty.readthedocs.org/en/latest/development.html. At the 'Setting up the databases' step running django-admin

Re: [Mailman-Users] help with error on start

On 05/26/2015 08:56 PM, Ricardo Santos wrote: Download from http://ftp.gnu.org/gnu/mailman/mailman-2.1.20.tgz; but have error again: # /var/lib/mailman/bin/newlist Traceback (most recent call last): ... File /usr/lib/python2.6/site-packages/dns/message.py, line 191 print('id

Re: [Mailman-Users] help with error on start

Download from http://ftp.gnu.org/gnu/mailman/mailman-2.1.20.tgz; but have error again: # /var/lib/mailman/bin/newlist Traceback (most recent call last): File /var/lib/mailman/bin/newlist, line 108, in module from Mailman import MailList File /var/lib/mailman/Mailman/MailList.py, line

Re: [Mailman-Users] help with error on start

Thanks Mark for you answer. I installed from a tutorial with this command (Centos 6.6) yum --enablerepo=remi install mailman (Ver 3:2.1.12-18.el6 ) 2015-05-17 11:54 GMT-04:00 Mark Sapiro m...@msapiro.net: On 05/16/2015 06:55 PM, Ricardo Santos wrote: I installed mailman and have those

Re: [Mailman-Users] help with error on start

On 05/18/2015 05:32 AM, Ricardo Santos wrote: Thanks Mark for you answer. I installed from a tutorial with this command (Centos 6.6) yum --enablerepo=remi install mailman (Ver 3:2.1.12-18.el6 ) OK, but the /usr/lib/mailman/Mailman/i18n.py file in your installed Mailman doesn't look like

[Mailman-Users] help with error on start

I installed mailman and have those message: /usr/lib/mailman/bin/check_db --all --verbose Traceback (most recent call last): File /usr/lib/mailman/bin/check_db, line 61, in module from Mailman.MailList import MailList File /usr/lib/mailman/Mailman/MailList.py, line 51, in module

Re: [Mailman-Users] help with error on start

On 05/16/2015 06:55 PM, Ricardo Santos wrote: I installed mailman and have those message: /usr/lib/mailman/bin/check_db --all --verbose Traceback (most recent call last): ... File /usr/lib/mailman/Mailman/Archiver/Archiver.py, line 37, in module from Mailman.i18n import _

Re: [Mailman-Users] Help with ONE broken list (Mailman 2.1.9) - part 2

At 3:09 PM -0700 5/5/15, Mark Sapiro wrote: I'm a bit confused, but I think I understand. You say this is Mailman 2.1.9, but the above traceback says /usr/lib/mailman/Mailman/Gui/Privacy.py defines a list attribute dmarc_quarantine_moderation_action which didn't exist before 2.1.18. My best guess

Re: [Mailman-Users] Help with ONE broken list (Mailman 2.1.9) - part 2

On 05/07/2015 10:11 AM, Drew Tenenholz wrote: Thanks for the suggestion. I did try it, and it actually did make things worse, though I've been able to get back to the previous (yet still broken) state. My mistake. I thought setting data_version to 1 would be OK and it was simpler than

Re: [Mailman-Users] Help with ONE broken list (Mailman 2.1.9) P.S.

On 05/05/2015 12:51 PM, drew.tenenh...@isid.org wrote: P.S. If this error message helps, here is something that doesn't work on the production machine but is fine on the development one: root# ./config_list -v -i /path_to_file/config_from_previous_date list-name Traceback (most recent

[Mailman-Users] Help with ONE broken list (Mailman 2.1.9)

Hi all -- I'm hoping you can make some suggestions on hot to get a broken list working again. Here's the basic details. Mailman 2.1.9 RHEL 5.x I have root access to the VM running our lists. The problem was caused by an IT Dept. standard RHEL update on April 21. Somehow, this update managed

Re: [Mailman-Users] Help with ONE broken list (Mailman 2.1.9) P.S.

P.S. If this error message helps, here is something that doesn't work on the production machine but is fine on the development one: root# ./config_list -v -i /path_to_file/config_from_previous_date list-name Traceback (most recent call last): File ./config_list, line 362, in ? main()

[Mailman-Users] Help: Api for remove list

Hi, I can remove a mailman list from this terminal command * rmlist -a listname* Is there any API for removing the Mailman List. -- Thanks and Regards, Selva Gajendran.S -- Mailman-Users mailing list Mailman-Users@python.org

Re: [Mailman-Users] Help: Api for remove list

On 04/28/2015 08:25 AM, Selva Gaja wrote: Hi, I can remove a mailman list from this terminal command * rmlist -a listname* Is there any API for removing the Mailman List. It depends what you mean by API. There is the command you show above, and there are the underlying things that

[Mailman-Users] Help with munge settongs

Have had problems with DMARC bounces. Upgraded to 2.1.18 but still having problems. Am still unsure what the settings should be on lists where it should show its come from the individual poster. Can someone give me all the appropriate various settings. Many thanks

Re: [Mailman-Users] Help with munge settongs

On 04/05/2015 11:11 PM, Rafael Salasnik wrote: Have had problems with DMARC bounces. Upgraded to 2.1.18 but still having problems. Am still unsure what the settings should be on lists where it should show its come from the individual poster. Can someone give me all the appropriate various

Re: [Mailman-Users] Help with regular expression filters

On Wed, 04 Feb 2015 15:56:14 -, Mark Sapiro m...@msapiro.net wrote: Malcolm Austen writes: What I would really like is a (simple) way to trap the absence of a subject header but I think, we can (understandably) only trap on the content of something that is present :-( ... In my

Re: [Mailman-Users] Help with regular expression filters

On 02/04/2015 06:04 AM, Stephen J. Turnbull wrote: Malcolm Austen writes: What I would really like is a (simple) way to trap the absence of a subject header but I think, we can (understandably) only trap on the content of something that is present :-( ... I don't think it would

Re: [Mailman-Users] Help with regular expression filters

On Tue, 03 Feb 2015 21:43:09 -, Mark Sapiro m...@msapiro.net wrote: In Mailman, with Python regexps https://docs.python.org/2/library/re.html, I would use ^Subject:.*\Wtest\W \W matches any 'non-word' character and is equivalent to [^a-zA-Z0-9_], i.e. anything including new-line which is

Re: [Mailman-Users] Help with regular expression filters

Malcolm Austen writes: What I would really like is a (simple) way to trap the absence of a subject header but I think, we can (understandably) only trap on the content of something that is present :-( As a workaround, procmail supports negative assertions of that kind: :0: * !

Re: [Mailman-Users] Help with regular expression filters

On Tue, Feb 03, 2015 at 10:46:39AM -0800, Marino Pascal wrote: I have a filter to block the word test from Subject because some people won't receive list mail for a few hours and think it's broken so they post test People who send test mails to lists I manage usually find themselves moderated.

[Mailman-Users] Help with regular expression filters

I have a filter to block the word test from Subject because some people won't receive list mail for a few hours and think it's broken so they post test And once one person does it everybody else feels obligated to test. So I use Subject: .*test Problem with that is that it also blocks latest and

Re: [Mailman-Users] Help with regular expression filters

At least in Emacs the following regexp works \_test\_ that finds 'test' but not 'fastest' or 'testy' bash, perl, ruby, etc. may have different ways of doing the same thing. ed On Tue, Feb 3, 2015 at 12:46 PM, Marino Pascal mpas...@gmail.com wrote: I have a filter to block the word test from

Re: [Mailman-Users] Help with regular expression filters

On 02/03/2015 12:08 PM, e.c. wrote: At least in Emacs the following regexp works \_test\_ that finds 'test' but not 'fastest' or 'testy' bash, perl, ruby, etc. may have different ways of doing the same thing. In Mailman, with Python regexps https://docs.python.org/2/library/re.html, I

Re: [Mailman-Users] Help Request Returning Nothing

On 1/25/2015 8:50 PM, Mark Sapiro wrote: On 01/25/2015 05:17 PM, Dennis Putnam wrote: On 1/25/2015 7:39 PM, Mark Sapiro wrote: See the FAQ at http://wiki.list.org/x/KYCB (these RHEL/CentOS changes are now over 10 years old). Not to be contrary but that was not the case with CentOS 6. This

Re: [Mailman-Users] Help Request Returning Nothing

On 01/25/2015 05:17 PM, Dennis Putnam wrote: On 1/25/2015 7:39 PM, Mark Sapiro wrote: See the FAQ at http://wiki.list.org/x/KYCB (these RHEL/CentOS changes are now over 10 years old). Not to be contrary but that was not the case with CentOS 6. This change was introduced by CentOS 7

Re: [Mailman-Users] Help Request Returning Nothing

On 01/24/2015 04:16 PM, Dennis Putnam wrote: I've recently muddled through a migration to a new server and struggled with setting up a custom URL for templates. However, in trying to set up the URL on a previously working help.txt, I've apparently fouled something up. I now get the correct URL

Re: [Mailman-Users] Help customizing VERP_CONFIRM_REGEXP

THANK YOU! Worked like a charm. I owe you a beer, at least. :) On Fri, Jul 18, 2014 at 12:46 AM, Mark Sapiro m...@msapiro.net wrote: On 07/17/2014 08:28 AM, Pablo Montepagano wrote: When confirmations are sent, the FROM header does not follow this pattern Mailman

[Mailman-Users] Help customizing VERP_CONFIRM_REGEXP

I have enabled in my server VERP_CONFIRMATIONS so that the subject of email confirmations is more human-friendly. But I would also like to change the format of the From: header of email confirmations. Currently they follow the default value of VERP_CONFIRM_REGEXP. I've been trying to change it so

Re: [Mailman-Users] Help customizing VERP_CONFIRM_REGEXP

On 07/16/2014 03:18 PM, Pablo Montepagano wrote: Currently they follow the default value of VERP_CONFIRM_REGEXP. I've been trying to change it so that I can get something like this: From: Mailman listaddr-confirm+coo...@example.org That is what you get by default if VERP_CONFIRMATIONS =

Re: [Mailman-Users] Help customizing VERP_CONFIRM_REGEXP

I'm sorry for not being clear. VERP_CONFIRM_REGEXP is set to the same value that comes with Defaults.py When confirmations are sent, the FROM header does not follow this pattern Mailman listaddr-confirm+coo...@example.org, it just has the addres, i.e, listaddr-confirm+coo...@example.org. I wolud

Re: [Mailman-Users] Help customizing VERP_CONFIRM_REGEXP

On 07/17/2014 08:28 AM, Pablo Montepagano wrote: When confirmations are sent, the FROM header does not follow this pattern Mailman listaddr-confirm+coo...@example.org, it just has the addres, i.e, listaddr-confirm+coo...@example.org. I wolud like to add the Mailman to the beginning and at

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/08/2014 05:24 PM, George Kasica wrote: Here you go sent to mailt...@netwrx1.org gets me Feb 8 19:11:41 eagle postfix/pipe[25088]: 30CEE121CDE: to=mailt...@lists.netwrx1.org, relay=mailman, delay=0.51, delays=0.15/0.01/0/0.35, dsn=2.0.0, status=sent (delivered via mailman service)

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

To: George Kasica Cc: Mailman Users Subject: Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists On 02/08/2014 05:24 PM, George Kasica wrote: Here you go sent to mailt...@netwrx1.org gets me Feb 8 19:11:41 eagle postfix/pipe[25088]: 30CEE121CDE: to=mailt

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/09/2014 09:50 AM, George Kasica wrote: Mark: Answers to questions below: As to your comment about using hashes for mailman...I'm thinking that might be the best course, and for postfix in general, this s a REALLY small installation as I mentioned and very low traffic realistically.

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

See below -Original Message- From: Mark Sapiro [mailto:m...@msapiro.net] Sent: Sunday, February 09, 2014 12:05 PM To: George Kasica Cc: Mailman Users Subject: Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists On 02/09/2014 09:50 AM, George Kasica wrote

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/09/2014 10:18 AM, George Kasica wrote: -Original Message- From: Mark Sapiro [mailto:m...@msapiro.net] Vette = Feb 08 16:12:39 2014 (20887) Message discarded, msgid: 8ec65c559e294241ba9cb4bfa98b6...@bn1pr05mb188.namprd05.prod.outlook.c om Feb 08 16:52:49 2014 (20887)

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/09/2014 04:29 PM, George Kasica wrote: SO what should I be setting here to allow Text only or convert to text only? In pass_mime_types set multipart message/rfc822 text/plain text/html Also set both collapse_alternatives and convert_html_to_plaintext to Yes. -- Mark Sapiro

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

[mailto:m...@msapiro.net] Sent: Sunday, February 09, 2014 6:01 PM To: George Kasica Cc: Mailman Users Subject: Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists On 02/09/2014 10:18 AM, George Kasica wrote: -Original Message- From: Mark Sapiro [mailto:m

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

Of George Kasica Sent: Sunday, February 09, 2014 6:29 PM To: Mark Sapiro Cc: Mailman Users Subject: Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists OK...Got a bounce back: The message's content type was not explicitly allowed Odd since I'm using outlook2013

[Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

Hello: Currently I've got Postfix running with virtual domains with a MySQL database and am trying to get Mailman to do so as well. I can get one domain to work mailt...@netwrx1.org but anything else is failing as below. Can someone assist? I've loaded the aliases as shown in to mysql and the

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/07/2014 01:59 PM, George Kasica wrote: Hello: Currently I've got Postfix running with virtual domains with a MySQL database and am trying to get Mailman to do so as well. I can get one domain to work mailt...@netwrx1.org but anything else is failing as below. Can someone assist? I've

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

: Mailman-Users [mailto:mailman-users-bounces+gkasica=netwrx1@python.org] On Behalf Of Mark Sapiro Sent: Saturday, February 08, 2014 12:21 PM To: mailman-users@python.org Subject: Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists On 02/07/2014 01:59 PM, George

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

To: Mark Sapiro; mailman-users@python.org Subject: Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists Mark Thanks, sorry on the idiot mistake - OK...I can't read :) Too many hours in front of the screen I corrected the aliases and other items you mentioned here

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/08/2014 02:39 PM, George Kasica wrote: I can send out messages to the list and they don't show as bouncing in the logs below but I also don't ever see them come back to the list here ... Feb 8 16:12:38 eagle postfix/pipe[21355]: B85CD121CCD: to=skunk-wo...@lists.netwrx1.org,

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/08/2014 02:44 PM, George Kasica wrote: The ODD part is I have a list here set up as mailtest and its working fine. I don't see any differences in setup. Is there a postfix transport maps entry affecting one of these lists/domains and not the other? -- Mark Sapiro m...@msapiro.net

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists On 02/08/2014 02:44 PM, George Kasica wrote: The ODD part is I have a list here set up as mailtest and its working fine. I don't see any differences in setup. Is there a postfix transport maps entry affecting one

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

On 02/08/2014 03:29 PM, George Kasica wrote: This is all the setup doc told me to add: /etc/postfix# cat transport lists.netwrx1.org mailman: This s the other list INSERT INTO aliases (mail,destination) VALUES ('mailt...@netwrx1.org','mailt...@lists.netwrx1.org'), ... I don't

Re: [Mailman-Users] Help needed Mailman, Postfix with MySQL and Virtual Domain Lists

not a Postfix or Mailman expert I'm coming from a exim/majordomo environment. George -Original Message- From: Mark Sapiro [mailto:m...@msapiro.net] Sent: Saturday, February 08, 2014 5:17 PM To: George Kasica; mailman-users@python.org Subject: Re: [Mailman-Users] Help needed Mailman, Postfix

Re: [Mailman-Users] help finding template

On 01/18/2014 04:18 PM, Ricardo Kleemann wrote: What about the template for confirmation? When clicking on the confirmation link (either subscribe or unsubscribe) from the email that is sent, it displays a page to confirm the request. And then once you click on the button to confirm, there's

[Mailman-Users] help finding template

Hi, The link normally at the footer of list messages, for example: Unsubscribe: https://mail.python.org/mailman/options/mailman-users/ricardo%40americasnet.com Will send out a confirmation email and also takes the user to a user-specific version of the options page. I'm trying to find, with no

Re: [Mailman-Users] help finding template

Ricardo Kleemann wrote: I'm trying to find, with no success, where the template for that output page is. It seems this might be a hardcoded output that uses the mailman.po text strings, but cannot have its overall content/layout be customized? The output is built on the fly by the

Re: [Mailman-Users] help finding template

Ok, thanks. On Sat, Jan 18, 2014 at 1:49 PM, Mark Sapiro m...@msapiro.net wrote: Ricardo Kleemann wrote: I'm trying to find, with no success, where the template for that output page is. It seems this might be a hardcoded output that uses the mailman.po text strings, but cannot have

[Mailman-Users] Help with Reverse-Proxy Integration

Hello, I am a newbie to Mailman.Googling and I have tried following steps in this link: http://mail.python.org/pipermail/mailman-users/2004-July/038393.html This does not work for me: ProxyPass /mailman http://internal-server/mailman ProxyPassReverse /mailman http://internal-server/mailman

[Mailman-Users] Help with Reverse-Proxy Integration

Thomas Murgan writes: This does not work for me: ProxyPass /mailman http://internal-server/mailman ProxyPassReverse /mailman http://internal-server/mailman If you want all URLs starting with http://external-server/mailman; to be forwarded to corresponding URLs at

Re: [Mailman-Users] Help with Reverse-Proxy Integration

On 8/8/2013 12:45 PM, Stephen J. Turnbull wrote: Thomas Murgan writes: This does not work for me: ProxyPass /mailman http://internal-server/mailman ProxyPassReverse /mailman http://internal-server/mailman If you want all URLs starting with http://external-server/mailman; to be

[Mailman-Users] HELP

I have an issue and I am confused on how to fix the problem I have root access and I can not create a new list from the web site Any ideas Dave -- Dave Foran Internet ONLY: mailto:d...@hamnet.org d...@hamnet.org Cruise Missile

Re: [Mailman-Users] HELP

On 05/03/2013 10:17 AM, Dave Foran wrote: I have root access and I can not create a new list from the web site See the FAQ at http://wiki.list.org/x/lYA9. -- Mark Sapiro m...@msapiro.netThe highway is for gamblers, San Francisco Bay Area, Californiabetter use your sense - B.

[Mailman-Users] Help! Mailman's Digest Option Sending Too Many Digests

Hi all, I'm one of the moderators of the Stanford University Program on Liberation Technology at http://liberationtechnology.stanford.edu/. I was wondering whether someone on this list could help me. I'm experiencing a problem with Mailman's digest option where, no matter what I do, Mailman is

Re: [Mailman-Users] Help! Mailman's Digest Option Sending Too Many Digests

On Mon, 04 Mar 2013 21:14:44 -, Yosem Companys ycompa...@gmail.com wrote: - How big in Kb should a digest be before it gets sent out? 0. I'm not sure that zero has any special meaning there - just that any one message will always cause it to send out a digest immediately. I'd try a

Re: [Mailman-Users] Help! Mailman's Digest Option Sending Too ManyDigests

Yosem Companys wrote: Mailman is sending too many digests daily. I have configured the options Mailman gives me as follows: - How big in Kb should a digest be before it gets sent out? 0. This is the major problem. 0 does not mean unlimited. It means a digest will be sent with every post

[Mailman-Users] Help! Mailman's Digest Option Sending Too Many Digests

Yosem Companys writes: Hi all, I'm one of the moderators of the Stanford University Program on Liberation Technology at http://liberationtechnology.stanford.edu/. You've come to the right place. Mailman is a liberating technology! I was wondering whether someone on this list could

Re: [Mailman-Users] Help! Mailman's Digest Option Sending Too Many Digests

Here's your problem. You need to set it to something higher than 0. I use 100 for mine. Yosem Companys wrote: - How big in Kb should a digest be before it gets sent out? 0. Farokh MCF Software...simply

Re: [Mailman-Users] Help! Mailman's Digest Option Sending Too Many Digests

Thank you to everyone who responded. To avoid cluttering your inbox, I'll respond to all of your questions in this one email. I originally had the drone list options set to the following: - When receiving digests, which format is default? MIME. - How big in Kb should a digest be before it

Re: [Mailman-Users] Help! Mailman's Digest Option Sending Too ManyDigests

Yosem Companys wrote: - When receiving digests, which format is default? MIME. - How big in Kb should a digest be before it gets sent out? 300. - Should a digest be dispatched daily when the size threshold isn't reached? Yes. This is all good. - How often should a new digest

[Mailman-Users] Help with Mailman

I manage a website http://www.gothamnetworking.com that uses Mailman as it's listserv We have over 775 members, 40 groups and run about 146 separate mailing lists Once list in particular is not working and I don't know why. I could use some help. Thanks, Mitch Tobol Gotham Webmaster

Re: [Mailman-Users] Help with Mailman

On 10/10/2012 8:13 PM, Gotham Webmaster wrote: I manage a website http://www.gothamnetworking.com that uses Mailman as it's listserv We have over 775 members, 40 groups and run about 146 separate mailing lists Once list in particular is not working and I don't know why. I could use some help.

[Mailman-Users] Help! How to quell list address in personalised messages

Hi, A bit urgent. I thought I'd turn on personalisation for an announce list I'm putting together, in order to have the person's address in the To field instead of the list address. The box will only be used for this list and messages wil only go out about once a month, so performance isn't

Re: [Mailman-Users] Help! How to quell list address in personalised messages

On 7/2/2012 8:02 AM, Geoff Shang wrote: But when I turned on full personalisation and got my Email address in the To field, the list address got sent in the Cc field. Is there any way I can stop this? I want to keep people from trying to post to the list. I will close other doors as

Re: [Mailman-Users] Help! How to quell list address in personalised messages

On Mon, 2 Jul 2012, Mark Sapiro wrote: This is intentional and by design to facilitate people replying to the list even with full personalization. Yes but for an announcement-type list you don't want this. If you don't want this, you need to modify Mailman/Handlers/CookHeaders.py to not add

Re: [Mailman-Users] Help! How to quell list address in personalised messages

Geoff Shang ge...@quitelikely.com wrote: On Mon, 2 Jul 2012, Mark Sapiro wrote: Lets see if I can do this without serious breakage. Geoff. If you need help, let me know. -- Mark Sapiro m...@msapiro.net Sent from my Android phone with K-9 Mail. Please excuse my brevity.

Re: [Mailman-Users] Help! How to quell list address in personalised messages

On Mon, 2 Jul 2012, Mark Sapiro wrote: If you need help, let me know. Think I got it. Commenting out the block at line 161 (Mailman 2.1.13) seems to have done the trick. Thanks again, Geoff. -- Mailman-Users mailing list

Re: [Mailman-Users] Help: how to extract a list's description using abash or Python script (Mailman version 2.1.9)

Thanks much for the code, Mark! Mehdi -Original Message- From: Mark Sapiro [mailto:m...@msapiro.net] Sent: Friday, June 01, 2012 11:20 PM To: Mehdi Mortezai; mailman-users@python.org Subject: Re: [Mailman-Users] Help: how to extract a list's description using abash or Python script

[Mailman-Users] Help: how to extract a list's description using a bash or Python script (Mailman version 2.1.9)

Hello All, I am new to your the Mailman Users' group. I manage Mailman 2.1.9 (a VM Red Hat Enterprise 5 system) for my organization but I am new to Mailman and don't know much about Python scripting. I need to generate a monthly report on all my mailing lists that includes each list's name,

  1   2   3   4   5   6   7   8   9   10   >