What I ended up doing here was not elegant and maybe slightly
underhanded but seems OK.
First I selected all the messages in my inbox and used
Command->MailMate->Copy Subjects and pasted that into BBEdit.
Did a little work there to reduce it to a list of 103 emojis. Then I
created a smart
I'd like to create a smart mailbox that selects messages whose subjects
include emojis.
I don't think it's possible to use regular expression character classes
in a "subject contains" condition, but if it were, I think something
like this would be a pretty good start:
subject contains
Hi,
I’m currently trialing MailMate and I like the smart mailbox concept;
is there an easy way to show emails with attachment bigger than x size?
I checked the
https://lists.freron.com/mailmate/2020-February/012241.html; seems
rather difficult to do? (not sure, how to install/load/create
On 23 Sep 2021, at 13:39, Bill Cole wrote:
It even does it in quotes. And in partial quotations (select+reply)
but not full-message replies. See attachment for what that line REALLY
is...
When my brain is fresh I'll have to attempt this - thank you. I pretty
much never do full message
On 2021-09-23 at 16:25:34 UTC-0400 (Thu, 23 Sep 2021 16:25:34 -0400)
Bill Cole
is rumored to have said:
On 2021-09-23 at 14:28:22 UTC-0400 (Thu, 23 Sep 2021 14:28:22 -0400)
Bill Cole
is rumored to have said:
On 2021-09-23 at 14:05:13 UTC-0400 (Thu, 23 Sep 2021 11:05:13 -0700)
Jo
is rumored
On 2021-09-23 at 14:28:22 UTC-0400 (Thu, 23 Sep 2021 14:28:22 -0400)
Bill Cole
is rumored to have said:
On 2021-09-23 at 14:05:13 UTC-0400 (Thu, 23 Sep 2021 11:05:13 -0700)
Jo
is rumored to have said:
On 23 Sep 2021, at 8:47, Bill Cole wrote:
On 2021-09-23 at 10:31:58 UTC-0400 (Thu, 23
On 2021-09-23 at 14:05:13 UTC-0400 (Thu, 23 Sep 2021 11:05:13 -0700)
Jo
is rumored to have said:
> On 23 Sep 2021, at 8:47, Bill Cole wrote:
>
>> On 2021-09-23 at 10:31:58 UTC-0400 (Thu, 23 Sep 2021 16:31:58 +0200)
>> aisrael
>> is rumored to have said:
>
> How did you change the attribution
On 23 Sep 2021, at 8:47, Bill Cole wrote:
> On 2021-09-23 at 10:31:58 UTC-0400 (Thu, 23 Sep 2021 16:31:58 +0200)
> aisrael
> is rumored to have said:
How did you change the attribution line??
--
Jo
All power corrupts. Absolute power is kinda neat though.
. George
On 23 Sep 2021, at 16:47, Bill Cole wrote:
On 2021-09-23 at 10:31:58 UTC-0400 (Thu, 23 Sep 2021 16:31:58 +0200)
aisrael
is rumored to have said:
Regarding smart mailboxes, my understanding has always been that it
is impossible to maintain them between 2 computers (running
Mailmate). Does
On 2021-09-23 at 10:31:58 UTC-0400 (Thu, 23 Sep 2021 16:31:58 +0200)
aisrael
is rumored to have said:
Regarding smart mailboxes, my understanding has always been that it is
impossible to maintain them between 2 computers (running Mailmate).
Does any workaround exist?
It is theoretically
Regarding smart mailboxes, my understanding has always been that it is
impossible to maintain them between 2 computers (running Mailmate).
Does any workaround exist?
Alain
___
mailmate mailing list
mailmate@lists.freron.com
On 4 Jun 2021, at 19:15, Jim Leff wrote:
> I set the mailbox rule as expansive as possible, choosing "Any" of the
> following mailboxes and "All Messages”. Configuration screenshots here:
> http://i.imgur.com/HWhf3Vq.png
>
> But the mailbox is empty.
>
> Any ideas?
A flag is not, by default,
I just tried using the Flag option under Conditions, and it works (you
can even specify the colour).
Alain
On 4 Jun 2021, at 19:15, Jim Leff wrote:
Hi!
I "flagged" a sent message (I did this within Mailmate v1.13.2).
Then I set up a smart mailbox for IMAP flagged messages, following
The instructions you indicate seem to involve tags, and not flags. Tags
work quite well for generating a smart mailbox, but I never tried flags.
Alain
On 4 Jun 2021, at 19:15, Jim Leff wrote:
Hi!
I "flagged" a sent message (I did this within Mailmate v1.13.2).
Then I set up a smart mailbox
Hi!
I "flagged" a sent message (I did this within Mailmate v1.13.2).
Then I set up a smart mailbox for IMAP flagged messages, following
instructions here:
https://lists.freron.com/mailmate/2020-December/013461.html
I set the mailbox rule as expansive as possible, choosing "Any" of the
That worked! Thank you!
~ Tj
On Fri, Dec 11, 2020 at 2:41 AM Fredrik Jonsson wrote:
> TJ Luoma 2020-12-11 8:17 wrote:
>
> > Mailmate must have some way of telling "An Email With An Attachment"
> > vs "An Email Without An Attachment" because it can show an attachment
> > icon.
>
> MailMate
TJ Luoma 2020-12-11 8:17 wrote:
Mailmate must have some way of telling "An Email With An Attachment"
vs "An Email Without An Attachment" because it can show an attachment
icon.
MailMate adds a number of virtual headers, on of them are
"Attachments-Count". I have not used it but I guess you
Mailmate must have some way of telling "An Email With An Attachment" vs "An
Email Without An Attachment" because it can show an attachment icon.
However, I can't figure out how to make a Smart Mailbox for "Any Email With
An Attachment". The example Smart Mailboxes are only for certain kinds of
Thank you!
I found there was already one of these in the "Examples" group that comes
with Mailmate, which must have been where I got it before, but I'm glad to
know how to roll my own.
TjL
On Wed, Dec 9, 2020 at 5:27 PM Scott wrote:
> Hi,
>
>
> On 10 December 2020, at 0910, TJ Luoma wrote:
Hi,
On 10 December 2020, at 0910, TJ Luoma wrote:
I'm sure I knew how to do this but I'm setting up a new Mac and can't
remember/figure it out.
How do I make a smart folder which includes any message which is
"flagged"
(regular IMAP flags, not Apple's colored flags)?
Create a new Smart
I'm sure I knew how to do this but I'm setting up a new Mac and can't
remember/figure it out.
How do I make a smart folder which includes any message which is "flagged"
(regular IMAP flags, not Apple's colored flags)?
Thanks!
Tj
who hates feeling dumb
On 16 Oct 2020, at 8:59, Charlie Clark wrote:
On 16 Oct 2020, at 9:38, Martin S Taylor wrote:
On 16 Oct 2020, at 0:27, Robert Brenstein wrote:
I have never tried putting regular IMAP mailboxes into a smart
mailbox. It seems counter-intuitive to me.
I don't see why. Suppose I have a
On 16 Oct 2020, at 9:38, Martin S Taylor wrote:
On 16 Oct 2020, at 0:27, Robert Brenstein wrote:
I have never tried putting regular IMAP mailboxes into a smart
mailbox. It seems counter-intuitive to me.
I don't see why. Suppose I have a IMAP mailbox called TopLevel, which
contains
On 16 Oct 2020, at 0:27, Robert Brenstein wrote:
I have never tried putting regular IMAP mailboxes into a smart
mailbox. It seems counter-intuitive to me.
I don't see why. Suppose I have a IMAP mailbox called TopLevel, which
contains SecondLevel1, SecondLevel2, and SecondLevel3, and
I have never tried putting regular IMAP mailboxes into a smart mailbox.
It seems counter-intuitive to me. I believe that the key is that no
source mailboxes are selected and no conditions are set for the mailbox
with that checkbox set.
On 15 Oct 2020, at 22:27, Martin S Taylor wrote:
You
You mean it only works if the sub-mailboxes are smart mailboxes? That
seems a bit curious. Why doesn't it work if the sub-mailboxes are
regular IMAP mailboxes in different accounts?
MST
On 15 Oct 2020, at 19:49, Robert Brenstein wrote:
You might be misconstruing what this checkbox does. Let
You might be misconstruing what this checkbox does. Let say I subscribe
to 10 mailing lists. I create a smart mailbox for each of the lists. I
then place all those mailboxes inside another mailbox which has no
source folders selected or conditions set. Now, if I activated the
checkbox to
When I click the checkbox to "Include messages in any submailbox", it
doesn't seem to make any difference. Am I missing something, or is this
a bug?
Martin
___
mailmate mailing list
mailmate@lists.freron.com
https://lists.freron.com/listinfo/mailmate
On 18 Aug 2020, at 15:54, Evan Silberman wrote:
I created a smart mailbox that adds a specific message with a certain
subject to my DevonThink Pro. However, anytime someone replies to that
message, it also gets added to DevonThink Pro. How can I modify the
smart mailbox criteria so it only
Hi Everyone,
I created a smart mailbox that adds a specific message with a certain
subject to my DevonThink Pro. However, anytime someone replies to that
message, it also gets added to DevonThink Pro. How can I modify the
smart mailbox criteria so it only adds the original message to
On 5 Jun 2020, at 15:02, Pete Resnick wrote:
On 5 Jun 2020, at 12:50, Fabian Blechschmidt wrote:
On 5 Jun 2020, at 19:45, Eric Sharakan wrote:
Hi, I have several smart mailboxes with a condition of "To Contains
sharakan". Someone just sent me an email with my last name
capitalized, and
On 5 Jun 2020, at 12:50, Fabian Blechschmidt wrote:
On 5 Jun 2020, at 19:45, Eric Sharakan wrote:
Hi, I have several smart mailboxes with a condition of "To Contains
sharakan". Someone just sent me an email with my last name
capitalized, and the condition wasn't satisfied.
Since email
Agreed. In fact, further down on that same page is this advice:
The principle of KISS suggests that our systems use case
insensitive emails.
Whereas the Robustness principle suggests that we accept case
sensitive emails.
Solution:
- Store emails with case sensitivity
Hey Eric,
unfortunately is the local-part (before the @) technically case
sensitive.
https://stackoverflow.com/a/9808332/1480397
The sentence I like the best is:
In short, you are safe to treat email addresses as case-insensitive.
It is up to Benny, but at least I agree and think this is
Hi, I have several smart mailboxes with a condition of "To Contains
sharakan". Someone just sent me an email with my last name capitalized,
and the condition wasn't satisfied.
Since email addresses are case-insensitive, shouldn't the filters also
be?
Thanks.
-Eric
The way I did this was setting up each flag as a smart mailbox (under a
general flagged mailbox)
Conditions are:
“Message Is Flagged” (for all colours)
Then set keywords to include or not the binary bits “$MailFagBit0“
“$MailFagBit1” “$MailFagBit2” as follows:
Red: no no no
Orange: yes no no
On 25 Feb 2020, at 19:47, Thomas Eckhold wrote:
> To create sub-mailboxis per color you could set the value to „Flags >>
> Colorname“.
>
> („Submailbox for each unique value of Flags >> Colorname“)
Ha, I tried that before but the submailbox names were „INBOX-Google“ and I
missed that I first
To create sub-mailboxis per color you could set the value to „Flags >>
Colorname“.
(„Submailbox for each unique value of Flags >> Colorname“)
Regards,
Thomas
On 25 Feb 2020, at 19:29, Robert M. Münch wrote:
> How can I create sub-mailboxes per flag color for a smart mailbox?
How can I create sub-mailboxes per flag color for a smart mailbox?
--
Robert M. Münch
signature.asc
Description: OpenPGP digital signature
___
mailmate mailing list
mailmate@lists.freron.com
https://lists.freron.com/listinfo/mailmate
Thanks Benny.
I thought so, but I wanted to make sure I haven’t missed anything.
Bundle sounds interesting, but I don’t have the time at the moment to
play around like this…
Cheers,
Leo
On 28 Jan 2020, at 0:29, Benny Kjær Nielsen wrote:
On 27 Jan 2020, at 3:14, leo wrote:
_I asked this
OK. I'm now using cli tools to do most of the lifting, incl search, by
accessing all the EMLs directly. Now I just need to figure out:
- How to get the Tags assigned to the individual EML, I'm building a
fzf-based search ncurses environment for working with MailMate email
- How to have
On 27 Jan 2020, at 3:14, leo wrote:
_I asked this before, but I didn’t see any reply, so maybe the mail
didn’t get through. So here you go again:_
I still have a huge backlog of unanswered emails to the list. In other
words, I'm most likely to be blamed for the lack of a reply.
How can I
Hi all,
_I asked this before, but I didn’t see any reply, so maybe the mail
didn’t get through. So here you go again:_
How can I create a Smart Mailbox for all emails with size > x? (In my
particular case is x = 50 MB)
I tried the `Size*` header, but it does not offer a numerical operator
Hi all,
How can I create a Smart Mailbox for all email with size > x? (In my
particular case is x = 50 MB)
I tried the `Size*` header, but it does not offer a numerical operator
when added as condition…
Then I tried the `Size*` header `Formatted` but still I found only
string comparison.
I have a smart mailbox set to show the contents of
deleted messages
Junk
and some of my online mailboxes for the account main:
main-trash
main-spam
main-junk
main-deleted messages
If I do a select-all, delete, delete sequence on the contents of this
smart mailbox, most of the time, MailMate
On 22 Feb 2019, at 11:01, chairep...@mailbox.org wrote:
If this is the case, have you noticed if it leaves the mailbox at a
later time?
No, it doesn’t leaves the mailbox at a later time. Only if I restart
MM it does.
I was actually able to reproduce this over the night (my yesterday
You didn't write when it fails, but I assume you mean that emails
don't leave the mailbox when it's no longer “today”. At least, if
I send an email to myself then it does show up in the Today mailbox.
That’s exactly my issue.
If this is the case, have you noticed if it leaves the mailbox at a
On 20 Feb 2019, at 8:01, chairep...@mailbox.org wrote:
Sorry but that doesn’t solve the problem as well.
I've created the same mailbox and I'll keep an eye on it.
You didn't write when it fails, but I assume you mean that emails don't
leave the mailbox when it's no longer “today”. At least,
Sorry but that doesn’t solve the problem as well.
On 18 Feb 2019, at 1:58, Robert Brenstein wrote:
On 16 Feb 2019, at 8:09, chairep...@mailbox.org wrote:
To get an overview of received mails within a day I use a smart
mailbox with that condition. MailMate runs all the time hidden. The
smart
my condition is: date-received is within 1 days
make sure that the option “limit at start of day” (the popup with
“is within”) is NOT checked
On 18 Feb 2019, at 8:32, chairep...@mailbox.org wrote:
Nothing special.
Mailboxes -> Any -> Inbox
Conditions -> All -> Message is Received Today
It
Nothing special.
Mailboxes -> Any -> Inbox
Conditions -> All -> Message is Received Today
It still doesn’t work.
Best regards
On 18 Feb 2019, at 1:58, Robert Brenstein wrote:
On 16 Feb 2019, at 8:09, chairep...@mailbox.org wrote:
To get an overview of received mails within a day I use a
On 16 Feb 2019, at 8:09, chairep...@mailbox.org wrote:
To get an overview of received mails within a day I use a smart
mailbox with that condition. MailMate runs all the time hidden. The
smart mailbox doesn’t updated. I have to close and open MailMate
again to update the smart mailbox.
I
To get an overview of received mails within a day I use a smart mailbox
with that condition. MailMate runs all the time hidden. The smart
mailbox doesn’t updated. I have to close and open MailMate again to
update the smart mailbox.
___
mailmate
On 27 Nov 2017, at 21:32, as...@posteo.de wrote:
How can I create a smart Mailbox with the condition: show all Messages
with a Purple Flag?
Bill provided a good answer, but it would of course be better if
MailMate made this easier to do (in the GUI).
--
Benny
On 27 Nov 2017, at 15:32 (-0500), as...@posteo.de wrote:
Hi!
How can I create a smart Mailbox with the condition: show all Messages
with a Purple Flag?
MailBoxes: All Messages
Condittions: Flags>>Color is 5
Yes, I know 5 is not a color. But it is 4+1, or in binary 101, which is
how the
Hi!
How can I create a smart Mailbox with the condition: show all Messages
with a Purple Flag?
Thank you!
___
mailmate mailing list
mailmate@lists.freron.com
https://lists.freron.com/listinfo/mailmate
You can do it on the Mailboxes panel not Conditions, using the compound
selector, if I follow your question correctly. For example:
https://my.pcloud.com/publink/show?code=XZPNaIZwGVKqeA8nsHz6hi9W1gJRJyW7Uuk
Robert
On 9 Apr 2017, at 13:17, Bernhard Pieber wrote:
Is there an easy way to
On 6 Jan 2017, at 13:58, Robert Brenstein wrote:
I’d like the smart mailbox “flagged” to show a submailbox for
each flag. Ideally, I’d like to see simply the flag icon as the
submailbox name.
I got as far as
sub mailbox for each unique value of: flags
mailbox name format:
I’d like the smart mailbox “flagged” to show a submailbox for each
flag. Ideally, I’d like to see simply the flag icon as the submailbox
name.
I got as far as
sub mailbox for each unique value of: flags
mailbox name format: ${#flags.flag.#name}
This shows the correct submailboxes but the
On 4 Jul 2016, at 9:46, John D. Muccigrosso muccigro...@me.com wrote:
I see there are several old requests on the mailing list for this
(2013 and 2014), but I wanted to put in another request for it.
I would like that as well.
__*Richard Rettke*__
*Laus Deo*
*Non sibi sed patriae*
I like to have “date is today” instead of “within last day”.
Ditto for “yesterday”. It’s nice to have last week or month too,
but I can live with the slight variation in the window on those when the
window doesn’t quite start at midnight. For “today” though, I
really want “today” and not the
Hi Phil,
On 3 Nov 2014, at 8:50, Phil Marlowe wrote (with possible deletions):
somehow i can't figure it out. Is there any way to just display all
mails with pdf Attachments? I tried the condition
Attachment-Name | contains | pdf
But that didn't do the trick. You've got some ideas? Your help
On 12 Apr 2013, at 14:30, Eric A. Meyer wrote:
I feel like someone asked a similar question recently, but I can't
find it in my mail archives. So.
I'd like to create a smart mailbox that shows everything in my IMAP
inbox except for those messages that are displayed in some other smart
At 15:11 -0400 4/12/13, Bill Cole wrote:
Show Messages in
All of the following mailboxes
Noneof the following mailboxes
Uptime Monitor
Contact Mail
Inbox
And uncheck the Under the following conditions checkbox.
Ahhh, very nice.
64 matches
Mail list logo
