Re: [Meep-discuss] Additional negative peak due to incident angle

2018-05-21 Thread Christoph Kleinhans

Dear Ardavan,


Thanks for your fast reply.
I was setting my run time till field decay 2x then 3x and then 10x times 
higher. It doesn’t have any influence on my results. Rather the 
reflection > 1 at 32.6 degree was getting even higher. But between 10 
and 22 degree, the results were the same.



In the link with the example of “Angular Reflectanve Spectrum of a 
planar interface”, it is recommended for 2D Problems to use the pw 
source like I wanted to use.


Maybe I am wrong, but for that pw how it is recommended, I would have to 
locate one GaussianSource at one x-side, where I set the bloch periodic 
conditions. In a periodic system the source at the x-side would getting 
periodically repeated and we wouldn’t have a pw anymore.



Thats why I was using only that ONE GaussianSource at the +y side with 
the recommended amp_func. It seems like, that we are getting an error 
with increasing degree (like shown in the attachment).



Is there maybe a complete other approach to solve this problem?

___
meep-discuss mailing list
[email protected]
http://ab-initio.mit.edu/cgi-bin/mailman/listinfo/meep-discuss

Re: [Meep-discuss] Additional negative peak due to incident angle

2018-05-18 Thread Ardavan Oskooi
It is possible that you are not running for long enough and thus the fields 
have not yet fully converged. Try reducing the tolerance in the 
stop_when_fields_decayed run function or simply increase the run time.

For reference, see this new tutorial example on computing the angular 
reflectance spectrum of a planar interface:

http://meep.readthedocs.io/en/latest/Python_Tutorials/Basics/#angular-reflectance-spectrum-of-a-planar-interface


> On May 18, 2018, at 6:22 AM, Christoph Kleinhans  
> wrote:
> 
> Hello Meep users,
> 
> using the Python interface, I simulate a scatter-problem with PML in 
> y-direction and a grating with periodic boundary conditions in x-direction. 
> The periodic structure is made of silver.
> 
> The distance between source and scatterer is high enough to not influence the 
> LDOS at the source location. Also the padding between scatterer and PML is 
> high enough.
> 
> My target is to measure the reflectance by letting a p-polarized plane wave 
> propagating in different angles (from 10 to 35 degree) on the scatterer and 
> then plot the reflectance over the angles. Right now I am doing for every 
> degree a simulation without scatterer (for normalisation) and with the 
> scatterer.
> 
> Between 10 and 20 degree the measured reflectance looks good and almost 
> matches the measured reflectance of a component build at the university 
> laboratory (I am using the specifications of that component to verify the 
> simulation set up).
> After 20 degree to 35 degree the reflectance get messed up (see attachment if 
> you like). At 25 degree the reflectance drop off, but it should be about 1, 
> the same at 33 degree.
> 
> I use the plane wave amp function build by Steven G Johnson with specifying 
> the kdir-vector for the incident angle (math is m and cmath is cm).
> 
> wavelength = 0.6328
> fcen = 1/wavelength
> df = wavelength
> phi_pw = (2*m.pi/360)*rot_degree
> 
> def pw_amp(k, x0):
> def _pw_amp(x):
> return cm.exp(1j * k.dot(x + x0))
> return _pw_amp
> 
> kdir = mp.Vector3(m.sin(phi_pw), m.cos(phi_pw))
> k = kdir.unit().scale(2 * m.pi * fcen)
> sources = [mp.Source(mp.GaussianSource(fcen, fwidth = df),
> component = mp.Hz,
> center = mp.Vector3(0,0.4*y),
> size = mp.Vector3(x,0),
> amp_func=pw_amp(k, mp.Vector3(y = 0.4*y)))]
> 
> 
> Now it is not exactly like the pw-example by Steven G Johnson. I have only 
> ONE source at the +y boundary. In my Simulation the computational cell got 
> the size of x = 0.8 and y = 2.2 (without PML) and I don’t know how exactly I 
> can implement the pw source with two interfer sources like this:
> https://github.com/stevengj/meep/blob/master/python/examples/pw-source.py
> 
> Can please anyone help me to set up my source so in the cell to get the right 
> incident angles.
> 
> Best Regards
> Christoph
> 
> 
___
meep-discuss mailing list
[email protected]
http://ab-initio.mit.edu/cgi-bin/mailman/listinfo/meep-discuss

[Meep-discuss] Additional negative peak due to incident angle

2018-05-18 Thread Christoph Kleinhans

Hello Meep users,


using the Python interface, I simulate a scatter-problem with PML in 
y-direction and a grating with periodic boundary conditions in 
x-direction. The periodic structure is made of silver.


The distance between source and scatterer is high enough to not 
influence the LDOS at the source location. Also the padding between 
scatterer and PML is high enough.



My target is to measure the reflectance by letting a p-polarized plane 
wave propagating in different angles (from 10 to 35 degree) on the 
scatterer and then plot the reflectance over the angles. Right now I am 
doing for every degree a simulation without scatterer (for 
normalisation) and with the scatterer.



Between 10 and 20 degree the measured reflectance looks good and almost 
matches the measured reflectance of a component build at the university 
laboratory (I am using the specifications of that component to verify 
the simulation set up).


After 20 degree to 35 degree the reflectance get messed up (see 
attachment if you like). At 25 degree the reflectance drop off, but it 
should be about 1, the same at 33 degree.



I use the plane wave amp function build by Steven G Johnson with 
specifying the kdir-vector for the incident angle (math is m and cmath 
is cm).



wavelength = 0.6328

fcen = 1/wavelength

df = wavelength

phi_pw = (2*m.pi/360)*rot_degree


def pw_amp(k, x0):

def _pw_amp(x):

return cm.exp(1j * k.dot(x + x0))

return _pw_amp

kdir = mp.Vector3(m.sin(phi_pw), m.cos(phi_pw))

k = kdir.unit().scale(2 * m.pi * fcen)

sources = [mp.Source(mp.GaussianSource(fcen, fwidth = df),

component = mp.Hz,

center = mp.Vector3(0,0.4*y),

size = mp.Vector3(x,0),

amp_func=pw_amp(k, mp.Vector3(y = 0.4*y)))]



Now it is not exactly like the pw-example by Steven G Johnson. I have 
only ONE source at the +y boundary. In my Simulation the computational 
cell got the size of x = 0.8 and y = 2.2 (without PML) and I don’t know 
how exactly I can implement the pw source with two interfer sources like 
this:

https://github.com/stevengj/meep/blob/master/python/examples/pw-source.py


Can please anyone help me to set up my source so in the cell to get the 
right incident angles.



Best Regards
Christoph



Plot of Ref.pdf
Description: Adobe PDF document
___
meep-discuss mailing list
[email protected]
http://ab-initio.mit.edu/cgi-bin/mailman/listinfo/meep-discuss