Barry I will do just that using ATF ,hopefully it will sort out the little
surges,
regards
mak
- Original Message -
From: Barry Stark [EMAIL PROTECTED]
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, September 26, 2006 11:43 AM
Subject: Re: [MBZ] Cruise Control Amp
I will start with the lubrication and report back.I am sure it will do the
rectification as all other parameters are correct. .
Thanks
mak
the feedback potentiometer track inside the servomotor wears out, but
that
results in difficulties with one particular speed. If setting a
significantly
Some days I'd swear they are really masculinity challenge annunciators
-j.
I see these alongside the road and in the breakdown lane all the time.
Saw something in the paper once about how many of these things the
roadside cleanup crews pick up, and their loathing to do it. It makes
me wonder how one controls a large truck while accomplishing the whole
deal
Kaleb,
Your absolutely right.. And then the trucker flashes his
christmas tree and moves over in front of you..
Used to give me a chill Real communication without saying a
word!!!
Chuck
Phoenix AZ
On Sep 26, 2006, at 7:16 AM, Kaleb C. Striplin wrote:
Flashing headlights
Yow, lubrication and rectification in adjoining sentences. I am cringing.
--R
M.Afzaal.Khan wrote:
I will start with the lubrication and report back.I am sure it will do the
rectification as all other parameters are correct. .
Thanks
mak
Sorry didn't get that bit. ??
-
Yow, lubrication and rectification in adjoining sentences. I am cringing.
--R
M.Afzaal.Khan wrote:
I will start with the lubrication and report back.I am sure it will do
the
rectification as all other parameters are correct. .
Thanks
mak
My W126 420SEL had new timing chain and guides less than 100k miles ago and
the guide broke and instant valve job. Note it did not rattle when started,
however the car has really been a lemon since day 1.
The timing chain and guides are not a big deal to replace usually the
hardest part is
Mak,
The linkages are so long and with so many connections that you want to
minimize any resistance that would be caused by buildup of dirt. ATF
doesn't collect dirt like any oil or grease would. That extra resistance
over the entire system ends up causing much more than resistance to the
Jim Cathey wrote:
i have always hear it as oh-ess-ex but now i read where it says that
0h-ess-ten is actually correct. anyone know?
It's ten, because it came after nine, which came after eight,
which came after seven, which came after six, which came after five,
which came after four,
Yeah, I enjoy doing that too - I think I would usually turn off the
headlights for a second to let him or her know they can scoot on over
in front of me. I heard it's especially helpful to the truck drivers
at night. They they almost always give you that return flash.
I really respect
Chuck, I like that. I'll try.
Brian
On 9/25/06, Chuck Landenberger [EMAIL PROTECTED] wrote:
Brian,
Just use your turn signals and stop causing yourself so much stress
and tension! You'll feel better and those of us who also use turn
signals thank you for joining us in our fight to GET
TimothyPilgrim wrote:
I doubt there is anywhere in North America (don't know about Mexico
though) that has traffic half as bad as this:
http://www.youtube.com/watch?v=Fg9f93gpfbo
At least there's some skill in evidence there...unlike in this video
from Moscow:
LarryT wrote:
But it's never gonna change - if anything drivers will continue to get
worse. We need to raise the drivers lic age to more than 16 and extend the
Learner's Permit time so they can get some experience.
That won't help. A longer learner permit will just give them more time
Kaleb C. Striplin wrote:
Flashing headlights means you want to pass. Headlights off and on mean
you are going to yield, as in, its safe for whoever to pull back into
your lane.
Kaleb's comment lines up with my own experience. I've observed that
signal many times, and occasionally used
In fact after I made that big list I found a small money 300D a couple towns
over on eBay. Hopefully it'll stay small money, the auction ends tomorrow, I
emailed for clarification.
This car will probably end up being driven a bit by the wife as her new 20 mile
daily commute burns alot more gas
Hendrik Riessen wrote:
No that's optional. Some of the big companies do but most don't.
And the drivers seem to spray-paint them out on the ones that do.
andrew strasfogel wrote:
Here (MD/DC) it's illegal to flash one's high beams.
You should probably flash your LOW beams, not your highs, anyway. You
want to signal to the driver, not dazzle them. ;)
redghost wrote:
I call the troopers to get them to go after the trucks dumping tin and
chunks of stuff on me as they pass me. Never have had the pleasure of
seeing one of them get pulled over. Maybe if it killed me?
They just passed a law that makes it a gross misdemeanor if an unsafe
Jim Cathey wrote:
Jim I bought a good iron tip not a gun. I took one look at that gun
and
said no way.
You also need some good solder, and may find that some sort of solder
removal device (I use a Solda-pullit) to remove excess will come in
handy.
And do not overlook the paint
Jim Cathey wrote:
http://seattle.craigslist.org/est/car/211360318.html -- 450sl $5k
Must have the even rarer alloy wheels with hubcaps? And what
happened to the fog lights? The interior is obviously Bamboo,
more of an orange than tan by any reasonable description. I
wonder what
That bus driver sure had somebody looking over his shoulder!
On Sep 26, 2006, at 9:57 AM, David Brodbeck wrote:
At least there's some skill in evidence there...unlike in this video
from Moscow:
http://www.youtube.com/watch?v=3oKGuOi8Waw
thanks David!
- Original Message -
From: David Brodbeck [EMAIL PROTECTED]
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, September 26, 2006 1:24 PM
Subject: Re: [MBZ] Cruise Control Amp 1979 240D
Jim Cathey wrote:
Jim I bought a good iron tip not a gun. I took
you are not coming to the rustyQ, little tommy?
On 9/25/06, tom savage [EMAIL PROTECTED] wrote:
A friend of mine has an '87 300SDL in need of new brake support/caster
joints. I've been under the car and it looks like the job can be done
with the coil springs in place, unlike the 123. Can it?
During my first visit to Seattle, my buddy slammed on the brakes every time
he approached a signal that turned yellow. He told me that the fuzz threw
the book at anyone caught running even a yellow light. Is this still true?.
On 9/26/06, Craig McCluskey [EMAIL PROTECTED] wrote:
On Sun, 24
Subframe mounts in the REAR of a 300TD WAGON? Huh??
On 9/26/06, Barry Stark [EMAIL PROTECTED] wrote:
Andrew -
Jim's right. Do the rear wheels have a lot of negative camber? Could be
sub
frame mounts.
Barry
BTW, I think my 1983 300TD rear end is too low. Is it a big deal to
lift it
Gary Hurst wrote:
you are not coming to the rustyQ, little tommy?
I am indeed, sir, now that I've realized that it is in fact on the 28th
and not the 21st. I guess my RSVP on Banned was a little low key.
Tom
i keep asking rusty why little tommy won't come to the rustyQ and he keeps
telling me he doesn't know why you won't come
confusing
On 9/26/06, tom savage [EMAIL PROTECTED] wrote:
Gary Hurst wrote:
you are not coming to the rustyQ, little tommy?
I am indeed, sir, now that I've realized that
Bringing anyone with you? A significant other maybe?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of tom savage
Sent: Tuesday, September 26, 2006 2:53 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] 126 brake support joint
Gary Hurst wrote:
you are
David wrote:Soldering well is a skill you learn with practice. It's not
hard, but like anything your early
results won't look so good.
One of the early mistakes a beginner makes is to heat the solder.Heating
the wire (for example) to be soldered and allowing the solder to melt
against
Hursty...you mean Little Tommy as in Animal Stories
Bob Rentfro
- Original Message -
From: Gary Hurst [EMAIL PROTECTED]
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, September 26, 2006 11:44 AM
Subject: Re: [MBZ] 126 brake support joint
you are not coming to
hit OWC and get a processor upgrade for $200 and maybe one of those
snazzy ATI Radeon 9800 cards too
Thanks. I'll check it out.
RLE
Listers, anyone have suggestons for Paintless Dent Removal) I found two so
far. I would rather use someone through a recommendtion.
1. http://www.dingdent.net/
2. http://www.dentmasters.com/paintlessdentremoval.html
Anyone have experiece with either of the above? Thanks
Rhonald
1985
Rhonald,
IIRC, you are in the DC area... I used to live there and thru MBCA
had a number of Tech Sessions at DentDoctors, which I believe has
evolved into DentMasters..
I had several jobs done there at the Montrose Road shop in
Rockville... Very well satisfied Go back
Hi all,
Forgive me if this comes up twice, I had an old address in my address book.
[EMAIL PROTECTED]
I have a 72 250 M130 US with the original Zenith INAT 32/40 carburetors. The
Haynes manual states that the gap of the idle stop screws is supposed to be
2.3mm and stop at the float house
Ebay item # 130031257612
http://cgi.ebay.com/ebaymotors/mercedes-benz_W0QQitemZ130031257612QQihZ0
03QQcategoryZ6336QQrdZ1QQcmdZViewItem
Donald H. Snook
McDonald, Tinker, Skaer, Quinn Herrington, P.A.
300 West Douglas
P.O. Box 207
Wichita, Kansas 67201 0207
Tel. (316) 263-5851
andrew strasfogel wrote:
During my first visit to Seattle, my buddy slammed on the brakes every time
he approached a signal that turned yellow. He told me that the fuzz threw
the book at anyone caught running even a yellow light. Is this still true?.
I haven't heard that, but they are
Is that 25 or 125 kmi ?
Dan Elliott
82 300D-T 100K
It was lax for a few years, but now is getting more play. Too many
people running lights and smacking into small children and the illegal
immigrants
On Sep 26, 2006, at 11:46 AM, andrew strasfogel wrote:
During my first visit to Seattle, my buddy slammed on the brakes every
time
he
All that talking made me rush out and get myself a G4 sawtooth.
Curses! I had just gotten the dumb G3 tower set up with panther and a
faster CPU. Well, progress. Will have a new toy to play with.
On Sep 26, 2006, at 1:09 PM, [EMAIL PROTECTED] wrote:
hit OWC and get a processor upgrade
101 - 140 of 140 matches
Mail list logo