Computer ate most of the post, however the question is what a factory
produced to comply with safety regulations versus someone with a gas axe
and welder.
The point I tried to make was that MB could not just cut a roof off a
C124 and come up with the A124, same way some one can't chop up a S124
I wrote it that way for a reason...
-Curt
Date: Wed, 29 Feb 2012 18:48:41 -0500
From: Scott Ritchey ritche...@nc.rr.com
To: 'Mercedes Discussion List' mercedes@okiebenz.com
Subject: Re: [MBZ] BioD was Volt vs. Gas
Message-ID: 6EF67AB2CADB49EC990C61FC71D5DB7C@ScottPC
Content-Type: text/plain;
Pretty common, my 240D is trying to do that too. Thus far I've been almost
keeping up with it. I don't use flimsy old microwave ovens, I use computer
cases! The areas I weld in are stronger than what they replace...
This is a good excuse for you to weld.
-Curt
Date: Wed, 29 Feb 2012 18:50:12
My younger son did a quite decent job on our old 95 4Runner. It was
rusted out over the rear wheel arches on both sides and at the lower
edge of the rear quarters going back to the bumper. He cut and welded
pieces of sheet metal into the areas where it was bad. It is not perfect
and it does
I'm sure many of you geeks are already aware of this:
http://www.digitaljournal.com/article/320137#ixzz1nissqAwZ
Greg
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
Did everyone see that the RaspberryPi computer was released for sale today?
Google RaspberryPi for details...
Dan
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To
Curt Raymond wrote:
This is a good excuse for you to weld.
That post was from Kevin. I know he is amazing - but welding
without being able to see would be quite a trick.
Kevin, if you _do_ weld - I'd sure like to know how you do it!
--Philip
___
would have been nice to share this *before* the changes took place this
morning,...
cheers!
e
On 01/Mar/12 10:26, Greg Fiorentino wrote:
I'm sure many of you geeks are already aware of this:
http://www.digitaljournal.com/article/320137#ixzz1nissqAwZ
Greg
On 01/03/2012 12:51 PM, Fmiser wrote:
Curt Raymond wrote:
This is a good excuse for you to weld.
That post was from Kevin. I know he is amazing - but welding
without being able to see would be quite a trick.
Kevin, if you _do_ weld - I'd sure like to know how you do it!
--Philip
Now
I just saw this as I was trying to wake up with my morning cuppa java. I
guess I did this before the caffeine kicked in. :-(
Greg
-Original Message-
From: mercedes-boun...@okiebenz.com [mailto:mercedes-boun...@okiebenz.com]
On Behalf Of ernest breakfield
Sent: Thursday, March 01, 2012
Thought we we had major problems with my son-in-law's 300TD a couple of days
ago. He left it idling before work and came out to stalled vehicle. When he
cranked it over it sounded like somebody dumped a box of rocks in the block.
Upon hearing the noise he did not attempt to start it again.
Broken air cleaner mount?
Dan
On Mar 1, 2012, at 6:23 PM, Mike Esh wrote:
Thought we we had major problems with my son-in-law's 300TD a couple of days
ago. He left it idling before work and came out to stalled vehicle. When he
cranked it over it sounded like somebody dumped a box of
This Gmail thing is great!
I haven't had time to sit down and mess with getting all my accounts set up
and importing contacts, etc., until today.
Just ran some tests as far as using different domain accounts, reply to's
and the like. Everything works like a champ. Nice.
This technology stuff
From: michael...@me.com
Thought we we had major problems with my son-in-law's 300TD a couple of days
ago. He left it idling before work and came out to stalled vehicle. When he
cranked it over it sounded like somebody dumped a box of rocks in the
block. Before he had time to look
My guess is the fan hitting something...
Jaime
On Thu, Mar 1, 2012 at 6:23 PM, Mike Esh michael...@me.com wrote:
Thought we we had major problems with my son-in-law's 300TD a couple of
days ago. He left it idling before work and came out to stalled vehicle.
When he cranked it over it
Good guess, louder than that.
Michael E. Esh
On Mar 1, 2012, at 6:27 PM, Dan Penoff lwb...@yahoo.com wrote:
Broken air cleaner mount?
Dan
On Mar 1, 2012, at 6:23 PM, Mike Esh wrote:
Thought we we had major problems with my son-in-law's 300TD a couple of days
ago. He left it
You got it Jaimie! All 4bolts holding the fan fell off and the fan and pulley
were left dangling.
Any one know Rusty's part number?
Michael E. Esh
On Mar 1, 2012, at 6:50 PM, Jaime Kopchinski jaime...@gmail.com wrote:
My guess is the fan hitting something...
Jaime
On Thu, Mar 1,
Mike Esh wrote:
You got it Jaimie! All 4bolts holding the fan fell off and the fan and pulley
were left dangling.
Any one know Rusty's part number?
For what, the bolts, the fan, or the radiator?
___
http://www.okiebenz.com
For new and used parts go to
Oh man... I hope the damage isn't too bad! Good luck!
Jaime
On Thu, Mar 1, 2012 at 7:49 PM, Mike Esh michael...@me.com wrote:
You got it Jaimie! All 4bolts holding the fan fell off and the fan and
pulley were left dangling.
Any one know Rusty's part number?
Michael E. Esh
On Mar 1,
That was yesterday, and they sold out in a few hours. I am on the waiting
list for the next batch though - ought to be a fun toy.
On Thu, Mar 1, 2012 at 12:46 PM, Dan Penoff lwb...@yahoo.com wrote:
Did everyone see that the RaspberryPi computer was released for sale today?
Google RaspberryPi
Heat sensing?
On Thu, Mar 1, 2012 at 12:51 PM, Fmiser fmi...@gmail.com wrote:
Curt Raymond wrote:
This is a good excuse for you to weld.
That post was from Kevin. I know he is amazing - but welding
without being able to see would be quite a trick.
Kevin, if you _do_ weld - I'd sure
Seems someone is in the pocket of the oil companies and is spewing FUD:
http://www.extremetech.com/extreme/120145-chevy-volt-battery-life-fail-or-fox-news-fail-somebody-has-the-math-wrong
Pity the poor Chevrolet Volt. It’s built by GM, the company that took a
multi-billion-dollar taxpayer
He must be able to see some, he runs RC cars doesn't he? I doubt he just fixes
and trades 'em...
-Curt
Date: Thu, 1 Mar 2012 12:51:37 -0600
From: Fmiser fmi...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Subject: Re: [MBZ] 240D Update
Message-ID:
Curt Raymond wrote:
He must be able to see some, he runs RC cars doesn't he? I doubt he just fixes
and trades 'em...
I thought he was totally unresponsive to light, but I could be wrong...
Mitch.
___
http://www.okiebenz.com
For new and used parts go to
Just the bolts. Thank goodness it failed at idle. I am not sure why it shut
down...just lucky?
Michael E. Esh
On Mar 1, 2012, at 7:55 PM, Mitch Haley m...@voyager.net wrote:
Mike Esh wrote:
You got it Jaimie! All 4bolts holding the fan fell off and the fan and
pulley were left
Success!
With very good instructions from the Android forum, and the help of the wife's
PC, I loaded and am now running a dual boot environment on my HP TouchPad with
WebOS on one partition and Android 4.0 (Ice Cream Sandwich) on the other.
The boot loader allows me to choose the OS upon
Pardon my ignorance but what is so exciting about this Raspberry Pie
thingy. From what I can see it's just a small mother board running Debian.
Hendrik
who is trying to get java to work
On 02/03/12 11:51, OK Don wrote:
That was yesterday, and they sold out in a few hours. I am on the waiting
http://online.wsj.com/article/SB10001424052970204653604577251461989702208.html
--R
On 3/1/12 8:28 PM, OK Don wrote:
Seems someone is in the pocket of the oil companies and is spewing FUD:
http://online.wsj.com/article/SB10001424052970204909104577235241393891490.html
--R
On 3/1/12 10:58 PM, Rich Thomas wrote:
http://online.wsj.com/article/SB10001424052970204653604577251461989702208.html
--R
On 3/1/12 8:28 PM, OK Don wrote:
Seems someone is in the pocket of the oil companies
And pi day isn't for another 2 weeks!
--R
On 3/1/12 10:54 PM, Hendrik and Fay wrote:
Pardon my ignorance but what is so exciting about this Raspberry Pie
thingy. From what I can see it's just a small mother board running
Debian.
Hendrik
who is trying to get java to work
On 02/03/12 11:51,
Yes, I'm totally blind, 100%. I have pretty good luck with mechanical
things, but I haven't tried soldering or welding. Of course, I couldn't see
the color of the metal to determine if I was welding or just blasting
through something. It's too hot to touch to try to find out where I would
31 matches
Mail list logo
