seems if your wagon doesn't have the Self Leveling System, it's missing
one of the coolest things about the wagons (though it was a PITA if it
ever started to cause trouble). you can see far too many dragging their
asses around town here because people didn't want to pay what it costs
to fix
I thought they did. Look again.
On Sat, Jul 28, 2012 at 9:34 PM, Hendrik Fay heni...@ozemail.com.au wrote:
Those third row seats do not look like factory items, they should have three
point seat belts.
Hendrik
who has three point seat belts way up the back
On 27/07/12 05:36, andrew
I don't drive either wagon that much so they seem to stay unbroken.
On Sun, Jul 29, 2012 at 3:48 AM, ernest breakfield
erne...@backyardengineering.org wrote:
seems if your wagon doesn't have the Self Leveling System, it's missing one
of the coolest things about the wagons (though it was a PITA
The van is not blowing ICE COLD AIR. It's blowing 68F, not cold. It was
COLD when it was new in 1997.I hooked up the guages, and read low side
of 28 and high of 160 at 1600-2000 RPM. Does it need more refrigerant, have
too much, or is something else wrong? Ambient temp is 104F.
Also, after some
High side should be in the 240 psi range for that OAT.
104(OAT)x2+32
Russ W.
On 7/29/2012 15:14, OK Don wrote:
The van is not blowing ICE COLD AIR. It's blowing 68F, not cold. It was
COLD when it was new in 1997.I hooked up the guages, and read low side
of 28 and high of 160 at 1600-2000 RPM.
So, add more R134a?
On Sun, Jul 29, 2012 at 4:00 PM, Russ Williams rawil...@eatel.net wrote:
High side should be in the 240 psi range for that OAT.
104(OAT)x2+32
Russ W.
On 7/29/2012 15:14, OK Don wrote:
The van is not blowing ICE COLD AIR. It's blowing 68F, not cold. It was
COLD when
The chart at http://dodgeram.org/tech/repair/HVAC/R134a.htm says 135 psi. ?
? ? ?
The calculator here says 134 -
http://www.csgnetwork.com/r134apresstempconv.html
My pressure is higher ? ? ? ?
On Sun, Jul 29, 2012 at 4:03 PM, OK Don okd...@gmail.com wrote:
So, add more R134a?
On Sun, Jul
I just drove the van, the AC got down to 52F while driving 45mph or so.
Then I took the ML out for fuel, and saw that it got to 37F over the same
route. MUCH more comfortable in the (now) 108F temp.
On Sun, Jul 29, 2012 at 4:07 PM, OK Don okd...@gmail.com wrote:
The chart at
SRS = Safety Restraint System, airbags could be part of the system
but
pre-tensioning seatbelts are the most common one in earlier Mercs...
Supplemental Restraint System. Which means supplemental to seat belts.
RLE
___
http://www.okiebenz.com
For new
Air gaps for hood are off, could indicate deeper collision damage.
Wrong seat belts for third row.
Battery looks a little small, AAA brand?
Brake fluid is very dark, wonder what other maintenance had been neglected.
--
Max Dillon
Charleston SC
'95 E300
'87 300TD
Those are the wrong charts.
Either you've got a leak and lost some of the charge, or your compressor is
about dead.
http://m.instructables.com/id/How-to-Repair-Automotive-AC/step1/freon-check/
From this site, looks to me like you should try adding some more refrigerant.
--
Max Dillon
Thanks, that was pretty comprehensive on complaints about the CA 85
model What the meaning of the acronym TO?
Alan
85 Turbo
On 7/29/12 12:48 AM, ernest breakfield wrote:
seems if your wagon doesn't have the Self Leveling System, it's
missing one of the coolest things about the wagons
TO is the trap oxidizer.
--
Max Dillon
Charleston SC
'95 E300
'87 300TD
alanc...@pacbell.net alanc...@pacbell.net wrote:
Thanks, that was pretty comprehensive on complaints about the CA 85
model What the meaning of the acronym TO?
Alan
85 Turbo
___
Interesting! How would one know which R134a charts are right? Any way, from
this chart, my pressures are low, but the center vent temp is about right.
However, the ML's center vent temp is much lower. Makes one question ALL
the charts!
For vehicles currently running with freon R-134a only
On Sun, 29 Jul 2012 19:11:35 -0400 Max Dillon meadedil...@bellsouth.net
wrote:
Those are the wrong charts.
Either you've got a leak and lost some of the charge, or your
compressor is about dead.
http://m.instructables.com/id/How-to-Repair-Automotive-AC/step1/freon-check/
From this
Are different oils used with R134a systems? If so, which does Mercedes use?
-Dave Walton
On Jul 29, 2012, at 7:38 PM, OK Don okd...@gmail.com wrote:
Interesting! How would one know which R134a charts are right? Any way, from
this chart, my pressures are low, but the center vent temp is about
Yes, question them, they are really just a guide. I agree that these center
vent temps from the chart I posted are hooky.
When I bought my first AC gauge it came with a chart, and it largely agrees
with the car-specific charts for my Mercedes and our Infiniti.
--
Max Dillon
Charleston SC
'95
On Sun, 29 Jul 2012 18:38:09 -0500 OK Don okd...@gmail.com wrote:
Interesting! How would one know which R134a charts are right? Any way,
from this chart, my pressures are low, but the center vent temp is
about right. However, the ML's center vent temp is much lower. Makes
one question ALL the
Yes, Mercedes 124 calls for a low viscosity oil, someone here posted it last
summer. I think the viscosity is determined by the compressor.
Then there is the mineral oil versus PAG oil debate...
--
Max Dillon
Charleston SC
'95 E300
'87 300TD
Dave Walton walton.d...@gmail.com wrote:
Are
Does oil escape with a leak or is it left behind? In other words - can I just
add refrigerant or do I need to add oil as well?
-Dave Walton
On Jul 29, 2012, at 7:58 PM, Max Dillon meadedil...@bellsouth.net wrote:
Yes, Mercedes 124 calls for a low viscosity oil, someone here posted it last
Well, it seems that you have to be smart enough to know how to read the
gauges! The outer ring of numbers is labled R134a and is green. The next
inner ring is black, and labled psi. Turns out that the green ring
corresponds to the pressures on the charts I referencd, while the black psi
numbers
Oil escapes, oily spot will mark the leak...
--
Max Dillon
Charleston SC
'95 E300
'87 300TD
Dave Walton walton.d...@gmail.com wrote:
Does oil escape with a leak or is it left behind? In other words - can I just
add refrigerant or do I need to add oil as well?
-Dave Walton
On Jul 29, 2012, at
Some of the confusion stems from the fact that R12 has the same
temperature and pressure on the low side (that is, in degrees F, 32
psi = 32 degrees). One of the reasons R12 was used in automobiles was
that it's simple to see what the evaporator temperature is.
R134a doesn't work like
There is no debate about using mineral oil with R134a, it's not a good
idea at all unless you want a new compressor soon -- it's not soluble
in R134a and circulates poorly.
Your choices are PAG or Ester oil, either of which work fine.
Nipondenso requires PAG, don't remember the viscosity
Hendrik wrote:
Those third row seats do not look like factory items, they
should have three point seat belts.
andrew strasfogel wrote:
I thought they did. Look again.
I'm with Hendrik on this one. Image #42.
http://i417.photobucket.com/albums/pp258/happybird213/42.jpg
There should
25 matches
Mail list logo