Control Amp 1979 240D
Is thee a link to fix these? MB Model number is 001-545 2132
You can resolder them yourself if you like, most of them seem to
respond to that in my experience. But it's a tedious job, and
you'd better know how to solder if you want a good chance of success.
Or I can do
Jim your help and the help of the others has been of high value. I
went out
today an bought a soder gun. I have three cores. If I mess up I will
send
one to you. No I have never soldered before. So be checking your mail
Jim
I hate to rain on your parade, but if you're soldering for the
Hi the cruise control works alright but has a little surging effect
.
what could be serviced for this?
More description required. Is it a little jiggly surge like a spastic
foot might cause, especially if irregular, or is it more of a long-scale
hunting effect? What is the time scale of
Its a little surge 0f about 4 Km or so seems like stepped on the pedal
gently for a few seconds. the speed is held overall and does not overshoot.
seems I don't have the Speedo cable on my 126 300Se/90. its electronic one
mak
- Original Message -
Hi the cruise control works
Mak -
I seem to remember folks saying that dry ball joints in the throttle linkage
could cause this. I pop them off and lube them with ATF using a Q-tip. I
have a plastic 35mm film container with some ATF and a Q-tip always at the
ready. I find it very handy for all kinds of lube jobs.
Barry
to
you
Regards Tom
- Original Message -
From: Jim Cathey [EMAIL PROTECTED]
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, September 26, 2006 1:42 AM
Subject: Re: [MBZ] Cruise Control Amp 1979 240D
Jim your help and the help of the others has been of high value. I
Jim I bought a good iron tip not a gun. I took one look at that gun
and
said no way.
You also need some good solder, and may find that some sort of solder
removal device (I use a Solda-pullit) to remove excess will come in
handy.
And do not overlook the paint stripper step. Really.
Go
Its a little surge 0f about 4 Km or so seems like stepped on the pedal
gently for a few seconds. the speed is held overall and does not
overshoot.
seems I don't have the Speedo cable on my 126 300Se/90. its
electronic one
On a 126 you're talking about the servomotor unit. If lubing the
Barry I will do just that using ATF ,hopefully it will sort out the little
surges,
regards
mak
- Original Message -
From: Barry Stark [EMAIL PROTECTED]
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, September 26, 2006 11:43 AM
Subject: Re: [MBZ] Cruise Control Amp
I will start with the lubrication and report back.I am sure it will do the
rectification as all other parameters are correct. .
Thanks
mak
the feedback potentiometer track inside the servomotor wears out, but
that
results in difficulties with one particular speed. If setting a
significantly
Yow, lubrication and rectification in adjoining sentences. I am cringing.
--R
M.Afzaal.Khan wrote:
I will start with the lubrication and report back.I am sure it will do the
rectification as all other parameters are correct. .
Thanks
mak
Sorry didn't get that bit. ??
-
Yow, lubrication and rectification in adjoining sentences. I am cringing.
--R
M.Afzaal.Khan wrote:
I will start with the lubrication and report back.I am sure it will do
the
rectification as all other parameters are correct. .
Thanks
mak
Jim Cathey wrote:
Jim I bought a good iron tip not a gun. I took one look at that gun
and
said no way.
You also need some good solder, and may find that some sort of solder
removal device (I use a Solda-pullit) to remove excess will come in
handy.
And do not overlook the paint
thanks David!
- Original Message -
From: David Brodbeck [EMAIL PROTECTED]
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Tuesday, September 26, 2006 1:24 PM
Subject: Re: [MBZ] Cruise Control Amp 1979 240D
Jim Cathey wrote:
Jim I bought a good iron tip not a gun. I took
: Tuesday, September 26, 2006 1:24 PM
Subject: Re: [MBZ] Cruise Control Amp 1979 240D
Jim Cathey wrote:
Jim I bought a good iron tip not a gun. I took one look at that gun
and
said no way.
You also need some good solder, and may find that some sort of solder
removal device (I use a Solda-pullit
Is thee a link to fix these? MB Model number is 001-545 2132
You can resolder them yourself if you like, most of them seem to
respond to that in my experience. But it's a tedious job, and
you'd better know how to solder if you want a good chance of success.
Or I can do it. Or you can get a
Cathey [EMAIL PROTECTED]
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Sunday, September 24, 2006 8:41 PM
Subject: Re: [MBZ] Cruise Control Amp 1979 240D
Is thee a link to fix these? MB Model number is 001-545 2132
You can resolder them yourself if you like, most of them seem to
respond
Anyone have a cruise control amp they want to sell which they know works. I
changed one out today for one I got in a grab bag ebay sale which had a
bunch of other controlers. The amp is bad.
Is thee a link to fix these? MB Model number is 001-545 2132
Regards Tom Scordato
1979 240D 97K
Try Jim at http://cathey.dogear.com/mamerepairs.html
Harry
On 9/24/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Anyone have a cruise control amp they want to sell which they know
works. I
changed one out today for one I got in a grab bag ebay sale which had a
bunch of other controlers.
19 matches
Mail list logo
