Better than that…
I came up with a kludge. Crude, but effective…
A 10/32 tee nut with the ‘spikes” ground off of it and a black plastic screw
cover/cap.
I had to grind the threaded part of the tee nut down a bit as it was too long
out of the box, but once that was done it fit fine.
Cost me un
Isn't someone here doing 3D printing? Sounds like a perfect candidate. Get
the specs from the one on the other side ...
Otherwise, find someone to machine one for you from the material of your
choice ...
On Sat, May 25, 2019 at 2:41 PM Dan Penoff via Mercedes <
mercedes@okiebenz.com> wrote:
> I’m
Dan,
I don't know if this will help in your situation but... Years ago I
needed a part (spring) for the mirror on my 1980 300SD. After inquiring for
help on the "other list", Stu said it's a kit. I went to the Atlanta MB
dealership and was told the same. However, my Indie found the pa
I’m looking for a part for the ML and not having a lot of luck…
On the 99-2005 ML models there are “wing” windows in the rear quarters that can
be opened. There’s a little linear actuator that moves the trailing edge of the
window in and out as required. The actuator is connected to the window t