Re: [MBZ] Bad contact

ednesday, August 02, 2017 10:45 AM > To: Mercedes Discussion List <mercedes@okiebenz.com> > Subject: Re: [MBZ] Bad contact > > At ISU, the WWII Temp housing and Temp buildings lasted until the mid > 80s. I had classes in a temp building. Engineering Placement office was > in

Re: [MBZ] Bad contact

To: Mercedes Discussion List <mercedes@okiebenz.com> Subject: Re: [MBZ] Bad contact At ISU, the WWII Temp housing and Temp buildings lasted until the mid 80s. I had classes in a temp building. Engineering Placement office was in a 30+ year old temp building, etc. > Craig via

Re: [MBZ] Bad contact

At ISU, the WWII Temp housing and Temp buildings lasted until the mid 80s. I had classes in a temp building. Engineering Placement office was in a 30+ year old temp building, etc. Craig via Mercedes July 31, 2017 at 9:45 AM On Sun, 30 Jul 2017 23:33:13 -0400

Re: [MBZ] Bad contact

Sadly, we've still got a few of those "T" buildings here on Joint Base Charleston. In the last few years, T-1 (the first temporary building built in WWII) was finally torn down. There are more than a handful of them left, still in use. - Max Charleston SC On Mon, Jul 31, 2017 at

Re: [MBZ] Bad contact

On Sun, 30 Jul 2017 23:33:13 -0400 Max Dillon via Mercedes wrote: > Nice work! Is that temporary? > > Red Green: "This is only temporary... Unless it works!" When I was at Caltech 1967 - 1971, there was a building near the student houses numbered "T-4", with "T"

Re: [MBZ] Bad contact

Nice work! Is that temporary? Red Green: "This is only temporary... Unless it works!" -- Max Dillon Charleston SC '87 300TD '95 E300 On July 30, 2017 11:28:07 PM EDT, Craig via Mercedes wrote: >On Sun, 30 Jul 2017 09:04:18 -0400 Meade Dillon via Mercedes

Re: [MBZ] Bad contact

Ah, this is for the intermittent HVAC blower! I was fixated on the bad contact in the headlight plug - Max Charleston SC On Sat, Jul 29, 2017 at 11:15 PM, Craig via Mercedes wrote: > > I loosened the screws holding the flat glow-plug-fuse-like strip and

Re: [MBZ] Bad contact

On Sat, 29 Jul 2017 09:08:50 -0500 "Kaleb C. Striplin via Mercedes" wrote: > First thing to do is check the 30 amp strip fuse that is in the fuse > holder just outside the main fuse box. I loosened the screws holding the flat glow-plug-fuse-like strip and it broke into

Re: [MBZ] Bad contact

NAPA offers heavy duty sockets for a very reasonable price. I use them whenever I do a headlight relay upgrade. -D > On Jul 29, 2017, at 11:05 AM, Peter Frederick via Mercedes > wrote: > > Sockets have been replaced on both my 300Ds, Get good heavy wire ones -- the >

Re: [MBZ] Bad contact

Sockets have been replaced on both my 300Ds, Get good heavy wire ones -- the factory ones are inadequate -- and solder them into the harness. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change

Re: [MBZ] Bad contact

First thing to do is check the 30 amp strip fuse that is in the fuse holder just outside the main fuse box. Sent from my iPhone > On Jul 28, 2017, at 11:32 PM, Craig via Mercedes > wrote: > > I pulled the dark headlight from our '90 300D/2.5 Turbo and took it into >

Re: [MBZ] Bad contact

Stern says 9004 contacts are undersized with normal 55/60W bulbs, making overwatt bulbs a nice way to overheat the contacts without making more light. If you replace the socket, I'd buy a new (GM or Mercedes, not Dorman) socket. Mitch. ___

Re: [MBZ] Bad contact

I believe that to get to the HVAC PBU, only step (3) below is required, but you may also need to: (1) remove the center console trim piece (with window switches and shifter surround) (2) remove the ashtray (two phillips head screws deep in there) (3) remove the two phillips head screws that

[MBZ] Bad contact

I pulled the dark headlight from our '90 300D/2.5 Turbo and took it into O'Reillys in Edgewood. I found it was a 9004. In looking at the filaments in the store's lights, I did not see anything which looked like a break, so I walked out of the store, put the bulb on the center console, and drove