Dan,
Thanks! A casual review indicates this doesn't cover my car (124.131) but
I'll bet that fault-codes are the same for other 124 cars of the same era
with same systems (eg. ASD).
-Max
On Tue, Aug 12, 2014 at 10:04 PM, Dan Penoff d...@penoff.com wrote:
Max,
Attached is a PDF that coves
Max,
Attached is a PDF that coves all of the different diagnostic connectors and
their pinouts.
This should be helpful in identifying things.
Dan
-- next part --
A non-text attachment was scrubbed...
Name: Diagnostic Codes.pdf
Type: application/pdf
Size: 931840 bytes
I made this yesterday (Sunday) to check for malfunction codes for the ACC
II in my '95 E300. No malfunction codes (one flash) but the LED would glow
dimly when it was supposed to be off. I'm wondering if the PBU ground is
weak/corroded?
The diagnostic system works by grounding the appropriate
If you want get fancy, or build a DIY multiplexer, you can get the 38 pin
connectors on eBay for about $5. They sell them as some sort of a crude adapter
cable with an ODBII connector on the other end.
Of course it doesn't work with an ODBII reader
Dan
Sent from my iPad
On Aug 11, 2014,
Max Dillon,
Charleston SC
On Aug 11, 2014 3:05 PM, Meade Dillon dillonm...@gmail.com wrote:
I need to dig into the FSM for the diagnostic codes for other systems, I
know the ASD has a pin, and I see the KLIMA relay also has a pin.
Max Dillon,
Charleston SC
On Aug 11, 2014 2:58 PM, Dan
Somehow this picture didn't make it.
Max Dillon,
Charleston SC
-- next part --
A non-text attachment was scrubbed...
Name: IMG_20140810_210434_572.jpg
Type: image/jpeg
Size: 955193 bytes
Desc: not available
URL:
'Nother ATTABOY.
Wilt
- Original Message -
From: Meade Dillon via Mercedes mercedes@okiebenz.com
To: Mercedes mercedes@okiebenz.com; Dan Penoff d...@penoff.com
Sent: Monday, August 11, 2014 3:03 PM
Subject: Re: [MBZ] DIY impulse counter
Somehow this picture didn't make it.
Max
On Mon, 11 Aug 2014 14:04:51 -0400 Meade Dillon via Mercedes
mercedes@okiebenz.com wrote:
I made this yesterday (Sunday) to check for malfunction codes for the
ACC II in my '95 E300.
Good job, it looks like a useful tool.
No malfunction codes (one flash) but the LED would glow dimly when it
Thanks Craig,
Fuse holder, pack of five fuses, two banana plugs, pack of four SPST
momentary switches (only single packs were too large), LED with built-in
resistor: it all adds up quickly...
PBU Ground: thanks for addressing that, I was worried that a bad ground
might be contributing to some
