thankee! well, I remembered 1's and 9's in the small one... just not
the right way
Craig via Mercedes wrote on 4/3/19 4:57 PM:
Front inner bearing SKF BR6 VP
Front outer bearing SKF BR2 LM11949/LM11918
Front bearing seals Federal Mogul National Oil Seals 239155
Craig
On Wed, 3 Apr 2019 16:26:23 -0500 Curley McLain via Mercedes
wrote:
> Does anyone have bearing numbers (any brand) for front wheel bearings
> and the seals for W124 front hubs?
>
> FCP wants $56 for 4 bearings and 2 seals etc. That is steep
>
> My memory sez that the outer bearing is 19019
Does anyone have bearing numbers (any brand) for front wheel bearings
and the seals for W124 front hubs?
FCP wants $56 for 4 bearings and 2 seals etc. That is steep
My memory sez that the outer bearing is 19019 or 190019 But I long ago
forgot the inner brg and seal numbers.
PORSCHE POSTERS! youroil.net
Weber Carb Info http://members.rennlist.com/webercarbs
.
- Original Message -
From: Robert Rentfro [EMAIL PROTECTED]
To: Mercedes Discussion List Mercedes@okiebenz.com
Sent: Tuesday, January 15, 2008 9:53 PM
Subject: [MBZ] Front Wheel Bearings
So.if I buy
LarryT wrote:
The alternative is to find an inexpensive scale to meaure the grams of
grease - which I have not looked into.
I think my old (so old it's greenish gray, not tan) triple beam Ohaus
was about $20 plus shipping on eBay several years ago. I think my
two pan tan Ohaus was also less
.
- Original Message -
From: Mitch Haley [EMAIL PROTECTED]
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Wednesday, January 16, 2008 8:34 AM
Subject: Re: [MBZ] Front Wheel Bearings
LarryT wrote:
The alternative is to find an inexpensive scale to meaure the grams of
grease
On Wed, 16 Jan 2008 09:01:08 -0500 LarryT [EMAIL PROTECTED] wrote:
Can't recall what the good Dr said, but it;s spelled out in the manual
Yup, that's where I looked.
Craig
___
http://www.okiebenz.com
For new parts see official list sponsor:
So.if I buy the stuff to do the front wheel bearings from Rusty will the
grease come pre-measured out for me?
I can remember Marshall saying how important it is to measure the grease
dead-nuts on.
Bob R
'77 300D 188k
___
http://www.okiebenz.com
For new
On Tue, 15 Jan 2008 19:53:52 -0700 Robert Rentfro [EMAIL PROTECTED]
wrote:
So.if I buy the stuff to do the front wheel bearings from Rusty will the
grease come pre-measured out for me?
Having just done that with a gram scale myself ...
The tube of green grease you get from Rusty has a little
