Should be. Depends on pop pressure. I have a few sets, but the pop pressures
are not the same.
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used by the Queen of Denial
POS 1987 SDL - Beware Nigerian Scammers
On Sep 2,
Dimitry -
I recently rebuilt the injectors on my '81 SD using the monarch nozzles. I
am pretty happy with the results. While testing before I rebuilt the
injectors I had one injector that was peeing a stream before it popped. I
imagine that was causing a lot of my rough idle and excess black
Thanks Barry. That was insightful. I also hear that Purple Power is good
stuff:) did you have to adjust pop pressures with the shims?
Sent from my iPhone
On Sep 3, 2012, at 7:57 PM, Barry Stark barryst...@verizon.net wrote:
Dimitry -
I recently rebuilt the injectors on my '81 SD using the
Anyone? Are the W115 220D injector bodies interchangeable with the W123 240D?
Sent from my iPhone
On Sep 1, 2012, at 9:05 PM, Dimitri Seretakis dsereta...@yahoo.com wrote:
I went ahead and ordered the Mercedesource Monarch injector nozzles with
rebuild kit and tester. I was going to get
Look for Bosch part #s and interchange numbers.
I believe they are interchangeable on all iron heads Om621, 615, 616
and 617. I put 220D or 240D holders on my OM621s to eliminate the
banjo fittings and hard return line. That was 30 years ago, so I am
not sure what they came off of. I
You forgot to put disassemble and clean between pull your injectors and swap
nozzles.
Rick
Sent from my iPhone
On Sep 2, 2012, at 12:36 PM, Dieselhead 126die...@gmail.com wrote:
That said, it should not take more than 4-6 hours to pull your nozzles, swap
nozzes, test and calibrate and then
Thanks, I'll check the part no. on the 220D ones. Since the nozzles look new
they must have been rebuilt. I'll run them through the pop tester and see how
they perform and possibly just use in my 240D. Do you know if pop pressur is
the same?
Sent from my iPhone
On Sep 2, 2012, at 1:36 PM,
You forgot to put disassemble and clean between pull your
injectors and swap nozzles.
Rick
Sent from my iPhone
On Sep 2, 2012, at 12:36 PM, Dieselhead 126die...@gmail.com wrote:
That said, it should not take more than 4-6 hours to pull your
nozzles, swap nozzes, test and calibrate and then
Sorry, I think I mis-spoke. I meant that I think the nozzle HOLDERS
are interchangeable. The nozzle itself is engine type specific. I
was suggesting that while the 220 nozzle HOLDERS may work in your
OM616, it may be simpler just to clean the original holders, and
install the new Monark
I went ahead and ordered the Mercedesource Monarch injector nozzles with
rebuild kit and tester. I was going to get rebuilds from Rusty but decided that
I was interested in learning about this whole rebuild process instead:) One of
the downfalls is that I will have to keep my car out of
www.buyASIANparts.biz
Tel/ 1-800-741-5252
Fax/ 770-454-9745
ICQ 427542441
AIM BuyMBparts
- Original Message -
From: Dieselhead 126die...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Monday, January 31, 2011 11:21 PM
Subject: Re: [MBZ] rebuilding injectors
OK, so how much do they cost
Here's a kit with everything.
http://mercedessource.com/node/6016
Also from the diesel giant site, they really seem to like the Bosio nozzles.
http://dieselgiant.com/mercedesinjectornozzlereplace.htm
On Tue, 01 Feb 2011 03:57 +, buymbpa...@gmail.com wrote:
You still haven't answered
Folks
someone asked what i'd charge to rebuild injectors
i guess for listmembers, $20 each plus parts and return shipping
i'd love to do some more
new nozzles cost about $20 and shims cost about $1
this would be ultrasonic cleaning, assembling and adjusting pressures
within 50 lbs and
-To: Mercedes Discussion List mercedes@okiebenz.com
Subject: [MBZ] rebuilding injectors
Folks
someone asked what i'd charge to rebuild injectors
i guess for listmembers, $20 each plus parts and return shipping
i'd love to do some more
new nozzles cost about $20 and shims cost about $1
this would
Hawkins Java macj...@aol.com
Sender: mercedes-boun...@okiebenz.com
Date: Mon, 31 Jan 2011 22:42:33
To: mercedes@okiebenz.com
Reply-To: Mercedes Discussion List mercedes@okiebenz.com
Subject: [MBZ] rebuilding injectors
Folks
someone asked what i'd charge to rebuild injectors
i guess for listmembers
15 matches
Mail list logo