RUN AWAY!
If you have done it once, you can do it by feel. Biggest issue I had
was getting the dash back in. Just look for all the screws and
bolts, label as to where you got them. (pictures are good) and
disassemble the whole front. There are three bolts with 10mm nuts
holding the
: redghost redgh...@comcast.net
Subject: Re: [MBZ] Removing Dash Ignition on w115
To: Mercedes Discussion List mercedes@okiebenz.com
Date: Sunday, May 2, 2010, 4:20 PM
RUN AWAY!
If you have done it once, you can do it by feel. Biggest issue I had was
getting the dash back in. Just look for all
I did a 114 years ago to replace the dreaded heater blower (and do
some AC work as well) and I still have the scars to show for it.
I would add that it took me all of two full days to accomplish the
feat, too.
Wimps! I've had the dash out of my 560 SL, twice, the dash
out of the 450 SL, and
Replacing the blower in a 114/115 is a bit more involved than pulling the
dash -- BTDT - x2.
On Sun, May 2, 2010 at 6:35 PM, Jim Cathey j...@windwireless.net wrote:
Wimps! I've had the dash out of my 560 SL, twice, the dash
out of the 450 SL, and out of the 380 SL. Haven't done my
wife's
Same time for my first one. I replaced the second one through the center
speaker hole - only took all of one day that way.
On Sun, May 2, 2010 at 4:57 PM, LWB250 lwb...@yahoo.com wrote:
What he said.
I did a 114 years ago to replace the dreaded heater blower (and do some AC
work as well) and
I've finally started on a former Kaleb-Kar, and need to yank the dash
ignition switch from the dash.
Anybody here done this before? I've got an intact dash working ignition
switch to replace them with.
Thanks
___
http://www.okiebenz.com
For new and used
I removed the dash, nd lots of other things to replace the blower motor in a
115 once - many years ago. Figure about 8 hours to get it out. I don't
remember the details however.
On Sat, May 1, 2010 at 8:19 AM, Joe Sasser joesas...@mac.com wrote:
I've finally started on a former Kaleb-Kar, and
yank the dash ignition switch from the dash.
Anybody here done this before?
Only on a 107. Mostly you remove everything that
looks like it's in the way, especially the center
console, and remove the three (?) mounting nuts that
hold the dash in.
-- Jim
