Ok so I have rough idle, knock loudest after start but now I can still hear
it after motor warmed up, instant start, decent power, rebuilt injectors,
compression of 290 in #4 and 390 in the others. Seems like a bad valve
guide as I can hear air leak near #4 at the head when turning it by hand.
Having that linkage break while driving would not be my favorite
thing in the world. That sounds like a very nice emergency fix. I
hope to remember it if I ever need it.
Manfred
Date: Sat, 4 Oct 2014 12:17:40 -0500
From: M. Mitchell Marmel marme...@gmail.com
Had fun for about an hour this
I bought a 78 SL C for cheap that had several broken linkage bushings. Very
poky- top speed was 45 mph IIRC. ..
--
Sent from myMail app for Android
Monday, 06 October 2014, 07:34AM -0400 from MG via Mercedes
mercedes@okiebenz.com:
Having that linkage break while driving would not be my
On Mon, 06 Oct 2014 20:08:20 +0400 astrasfogel--- via Mercedes
mercedes@okiebenz.com wrote:
I bought a 78 SL C for cheap that had several broken linkage bushings.
^
|
Why the space? --|
I've noticed it on other emails, too.
Craig
Must be your end Craig, Andrew's emails look fine too me.
Max Dillon,
Charleston SC
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
I'm seeing it too, rando m s paces when Andrew writes SL C.
-Curt
From: Meade Dillon via Mercedes mercedes@okiebenz.com
To: Mercedes mercedes@okiebenz.com; Craig McCluskey diese...@pisquared.net
Sent: Monday, October 6, 2014 12:56 PM
Subject: Re: [MBZ] new fix
To: Mercedes mercedes@okiebenz.com; Craig McCluskey
diese...@pisquared.net
Sent: Monday, October 6, 2014 12:56 PM
Subject: Re: [MBZ] new fix on new/old TD
Must be your end Craig, Andrew's emails look fine too me.
Max Dillon,
Charleston SC
___
http
On Mon, 6 Oct 2014 20:29:08 -0400 Andrew Strasfogel via Mercedes
mercedes@okiebenz.com wrote:
Because that's the correct way! Look it up.
Where?
Craig
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or
Mercedes coffee table books, service manuals and any other OFFICIAL Daimler
Benz publication. I would send a link except I can't track any down.
Also, try looking on the trunk lid of the car itself:
http://losangeles.craigslist.org/wst/cto/4700485168.html
Andrew
Trying to hide a smug grin
On
Discussion List mercedes@okiebenz.com
Sent: Thursday, October 02, 2014 11:23 AM
Subject: [MBZ] new fix on new/old TD
Had fun for about an hour this morning. I fixed the accelerator
linkage on the firewall of the red TD. I hate those linkages because
they break at that crumbly plastic that MB
On Thu, Oct 2, 2014 at 10:23 AM, MG via Mercedes mercedes@okiebenz.com
wrote:
Had fun for about an hour this morning. I fixed the accelerator linkage on
the firewall of the red TD. I hate those linkages because they break at
that crumbly plastic that MB used to make the pivot bushing. Then
There are several things that can cause rough idle with instant start
-- most probably are different pop pressures between the injectors,
which is more or less inevietable with age and use, and leaking
pressure valve seals. Very rare for the pressure valves themselves to
leak, but I
Excuse my ignorance, but what are pressure valves/pressure valve seals?
Otherwise thanks for the tutorial.
Scott
-Original Message-
From: Peter Frederick via Mercedes
Sent: Saturday, October 04, 2014 1:26 PM
There are several things that can cause rough idle with instant start
--
The injectors are the easiest to get to for sure. I haven't done
delivery valve seals though I do have a set of the valves as well
as the seals and springs which I bought to do the job on a 300D
that I gave to my youngest daughter. It however turned out not to
need it. After I ordered the
Yes I was also considering the rack damper. I even have a new
damper screw to put in there. It did look like someone had tried
to adjust that because there are no more threads on the screw
visible any more. Which leads me to think that this has been
going on a while. I may just stick that in
Had fun for about an hour this morning. I fixed the accelerator
linkage on the firewall of the red TD. I hate those linkages
because they break at that crumbly plastic that MB used to make
the pivot bushing. Then given the fact that they want anywhere
from 45-65 for a new one with the same
ATTABOY!
Wilton
- Original Message -
From: MG via Mercedes mercedes@okiebenz.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Thursday, October 02, 2014 11:23 AM
Subject: [MBZ] new fix on new/old TD
Had fun for about an hour this morning. I fixed the accelerator linkage
leaking pressure valve seals result in variable fuel delivery and
injection timing at idle and low speed. Bad cases cause excessive
knock as well, that goes away with speed increase.
instant start means you don't need to worry about compression (rings
good, valves sealing pretty well),
Check nozzles first, as you said. Then it is delivery valve seals
and possibly delivery valves. Because I have done this numerous
times, to me it is easier than rack damper. Then I'd go after the
rack damper. You may want to reverse 2 and 3 depending on your
comfort level.
Thanks
19 matches
Mail list logo