Ignore the idiocy and negotiate for a car that isn't vanilla/beige.
On Tue, Oct 12, 2021 at 10:15 AM Floyd Thursby via Mercedes <
mercedes@okiebenz.com> wrote:
> Some people call me Maurice
>
>
> https://myrtlebeach.craigslist.org/cto/d/myrtle-beach-mercedes-sl-550/7393014196.html
>
> --
> --FT
Some people call me Maurice
https://myrtlebeach.craigslist.org/cto/d/myrtle-beach-mercedes-sl-550/7393014196.html
--
--FT
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
I did a BW check and it comes back that the Gen II use a relay, while the Gen I
use line voltage to play with the seats. I am going to try to use the guts
from the Gen II to rebuild the Gen I
clay
> On Mar 22, 2017, at 5:00 AM, Dan--- via Mercedes
> wrote:
>
> Check
Check the BW forum, but if my memory serves me correctly the differences are
significant due to the inclusion of the memory function in the Gen II controls.
-D
Sent from my iPad
> On Mar 22, 2017, at 12:25 AM, clay via Mercedes wrote:
>
> The seat controls on the 300SD
The seat controls on the 300SD are sort of messed up. I was wondering if I
could swap in the Gen II controls into a Gen I. The old style is hard wired,
so I would need to hack into the wires and splice the connectors. Anybody know
the pin out or wire designation?
clay
The drive cable ends have a tendency to come loose from the housing which
lets the square drive end of the spiral disengage from the hub.
What can be done about this? Is it threaded and simply needs to be
retightened to bring the end back into the hub? I haven't mounted the seat
yet, so I
The drive cable ends have a tendency to come loose from the housing which
lets the square drive end of the spiral disengage from the hub.
On 12/1/06, Rich Thomas [EMAIL PROTECTED] wrote:
I don't know how Benz cables work, but on my old Caddy convertible top,
a motor drives the gears through
Well, I finally got the power seat connector on the new passenger's seat
wired up properly and plugged it into the car. The forward/backward
function worked at first, but now, the drive cable seems to slip, and the
seat is stuck. Has anyone torn into the drive cables and successfully
gotten
I don't know how Benz cables work, but on my old Caddy convertible top,
a motor drives the gears through cables that run through spiral wound
housings. One of these cables got a little kink in it, bound up in the
housing, and it was no good. Might be what has happened to yours? Or
maybe