Replaced the rear suframe mounts including differential mount. Easier than
Stu explains. Pry the subframe down, insert a 3 long piece of 1/2 pipe
between the mount hub and the receiver stub on the floor, raise subframe
with a floor jack, and POP!!, out comes the mount. No hammering or blunt
On Mon, Nov 28, 2005 at 07:02:01PM -0600, Hans Neureiter wrote:
Total cost: $ 160 in parts, $ 15 in beer for celebration.
Final result: Reference point on rear bumper is now 4 1/2 higher.
Good to hear it went easy for you. 4.5 inches is quite a difference.
K
Yeah, I now can see traffic behind me in the mirror. Not just the crap I
just ran over 50 feet earlier.
On 11/28/05, Kevin [EMAIL PROTECTED] wrote:
On Mon, Nov 28, 2005 at 07:02:01PM -0600, Hans Neureiter wrote:
Total cost: $ 160 in parts, $ 15 in beer for celebration.
Final result: