I have the inner panel off and electrically everything is fine to the
motor.
That's harder to determine than you might think. Hook a test light
to the two terminals and actuate the switch. It should light up both
ways. The terminals are both 'hot' normally, the switch selectively
grounds one
On Apr 27, 2006, at 12:11 PM, Chuck Landenberger wrote:
Suggestions appreciated.
Best Regards
Dan
The most common failure is a dirty switch, which is easily rectified
by disassembly and cleaning. Putting 12v directly to the wires on the
door will tell you if the motor is good
Chuck is correct, but you neglected to mention whether the window was
attempting to rise or was totally dead. If it's bumping and then falling
back down, the regulator teeth or a toogh thereof, are/is broken. Otherwise,
it could be a bad motor or switch.
On 4/27/06, Chuck Landenberger [EMAIL