Remove the wheel, loosen the bolt, then take something long like a drift
or something and a hammer, a couple of good whacks and it will pop right
out. Outer end has to come out and down before you can get the diff end
out.
Neal Kramarcy wrote:
Hello folks,
I've a noisy drive axle in
On Monday, February 13, 2006, at 09:54 AM, Neal Kramarcy wrote:
Hello folks,
I've a noisy drive axle in my '81 300CD and decided to replace with
a
rebuild from Rusty. The problem I've run into is driving out the wheel
end of the drive axle; separating the differential end was no
Thanks for the help. I've done a bit of banging on it already with no
luck, but I'll give it another shot. My guess is that after 25 years
the hub and driveaxle have dried grease packed in there.
Neal
Kaleb C. Striplin wrote:
Remove the wheel, loosen the bolt, then take something long
