Re: [MBZ] OT cheap Maxima available

2011-03-07 Thread Walt Zarnoch
Mid-engine, rwd datsun. That could be fun! Would need custom linkages, fuel tank relocation, some frame work to add the ifs setup to the rear as an irs setup... And lots of time... Or, an adapter plate to mate the engine to the trans, and be done with it . :) Walt On Mar 8, 2011 1:18 AM, "Alex

Re: [MBZ] OT cheap Maxima available

2011-03-07 Thread Alex Chamberlain
Rich said: >> I should buy that engine/trans to put in the 72 Datsun and boost it up or >> something.  Too bad I am not near Chitown. >> That would be a trick, since your 510 is RWD and a '93 Maxima is FWD. Were you planning to turn the transaxle around and put the engine where the rear seats are?

Re: [MBZ] CARFAX and 300 CDs for sale/rent/salvage/rebuild

2011-03-07 Thread B Dike
I'm in Seattle.  A good motor for the 300CD would be most welcome. -- Message: 10 Date: Mon, 7 Mar 2011 20:24:22 -0500 From: "Max Dillon" To: "'Mercedes Discussion List'" Subject: Re: [MBZ] Mercedes Digest, Vol 64, Issue 28 Message-ID: <007f01cbdd2f$8edadaa0$ac908fe

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread OK Don
That's what the 5 speed is good for! On Mon, Mar 7, 2011 at 8:24 PM, Curt Raymond wrote: > I'm actually well pleased with my '84 190D auto, its quite drivable as the > engine is always spun up. It REALLY needs an overdrive on the highway > though, its over 3,000 rpm at 60mph. > > -Curt -- > OK D

Re: [MBZ] California Version - 1985 300TD

2011-03-07 Thread WILTON
Build date (month and year) is usually stamped on the data plate on the driver's door latch post; for example 2/84, 12/83, or 6/84, etc. Wilton - Original Message - From: "Curt Raymond" To: "Diesel List" Sent: Monday, March 07, 2011 9:28 PM Subject: Re: [MBZ] California Version - 19

Re: [MBZ] Mercedes Digest, Vol 64, Issue 29

2011-03-07 Thread Steve Williams
Getting too many emails. You should check it out. Steve Williams -Original message- From: mercedes-requ...@okiebenz.com To: mercedes@okiebenz.com Sent: Tue, Mar 8, 2011 01:56:23 GMT+00:00 Subject: Mercedes Digest, Vol 64, Issue 29 ___ http://www.o

Re: [MBZ] OM603 Valve Tick Diagnoses and Fix

2011-03-07 Thread Kaleb C. Striplin
ohhh I see. On 3/7/2011 3:07 AM, Max Dillon wrote: It is a lifter, starved of oil due to failed head gasket. Very respectfully, /s/ Max Dillon '87 300TD 334k miles '95 E300 280k miles '73 Balboa 20 Charleston SC From: Kaleb C. Striplin To: Mercedes Discuss

Re: [MBZ] California Version - 1985 300TD

2011-03-07 Thread Fred Moir
Hey, Curt. Send me the chassis number, and the engines number, I may well have a spare head for you, new valves and all. Fred Moir Lynn MA Diesel preferred On 3/7/2011 9:28 PM, Curt Raymond wrote: Its an '84, presumably an early one, how do I find the build date? It is indeed a 2.2l. Inter

Re: [MBZ] Windshield

2011-03-07 Thread Fmiser
> Allan Streib wrote: > Every time I've had a factory windshield replaced I ended up > with leaks within a year or two. Twice on a VW and once on a > Dodge Caravan. Practically all my 123 cars have leaked. With factory glass and gasket. I put a bead of RTV at the glass/gasket junction. That s

Re: [MBZ] '78 240D clutch rod

2011-03-07 Thread Allan Streib
Does the noise change if the clutch is engaged/disengaged? Throwout bearings can get noisy Curt Raymond writes: > I'm actually more concerned that the noise is the clutch being not fully > engaged as I drive and thus eating itself. > > Its a weird "doo doo" noise that matches road speed. >

Re: [MBZ] '78 240D clutch rod

2011-03-07 Thread Curt Raymond
I'm actually more concerned that the noise is the clutch being not fully engaged as I drive and thus eating itself. Its a weird "doo doo" noise that matches road speed. Current theory is the sound is created by two rust holes (don't tell Dwight), one through the inner fender and one through the

Re: [MBZ] Windshield

2011-03-07 Thread Curt Raymond
When Safelite replaced the glass in my '85 190D they used Plinkington, the overall deal was decent. Unfortunately then the car took to crap and 2 years later I chucked a rock through the windshield of the car so we could fit more junk in it to take to the scrapper. -Curt Date: Mon, 7 Mar 2011

Re: [MBZ] California Version - 1985 300TD

2011-03-07 Thread Curt Raymond
Its an '84, presumably an early one, how do I find the build date? It is indeed a 2.2l. Interesting things about this car: Mono wiper with no in/out thingie Glow plug light on the left side of the steering wheel 14" wheels with their special bolts and other stuff I've surely forgotten.. -Curt D

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread Curt Raymond
Condition, condition, condition... Could be worth it, could be crap. I've probably got $4500 in my '84 190D right now (it was a $250 car remember) and its got a creaking ball joint (just started tonight) so $3k if its really in good shape is probably fair. -Curt Date: Mon, 07 Mar 2011 15:41:2

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread Curt Raymond
I'm actually well pleased with my '84 190D auto, its quite drivable as the engine is always spun up. It REALLY needs an overdrive on the highway though, its over 3,000 rpm at 60mph. -Curt Date: Mon, 7 Mar 2011 11:22:22 -0800 (PST) From: Max Dillon To: Mercedes Discussion List Subject: Re: [MB

Re: [MBZ] OT cheap Maxima available

2011-03-07 Thread Dieselhead
Fly in, take mao out for a sandwich, drive it home. I should buy that engine/trans to put in the 72 Datsun and boost it up or something. Too bad I am not near Chitown. --R On 3/7/2011 5:42 PM, Dieselhead wrote: Friend of mine told me he was getting rid of his maxima. It is rusty, and shoul

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread OK Don
My son's 5 speed 190D 2.2 is a lot of fun to drive - the 2.6 vergasser should be even more fun. I suspect that when it comes time to work on the head, you could swap the engine for a 3.0 instead? more fun yet! On Mon, Mar 7, 2011 at 1:22 PM, Max Dillon wrote: > I had an '84 190D 2.2, five speed,

Re: [MBZ] '78 240D clutch rod

2011-03-07 Thread OK Don
That doesn't sound good. Don't forget that you CAN drive it without a working clutch (as long as it fails in the engaged position) - so don't feel stranded, when you're not. On Mon, Mar 7, 2011 at 11:43 AM, Curt Raymond wrote: > Mine works with the too new MC and rod, it just doesn't feel right

Re: [MBZ] Windshield

2011-03-07 Thread Allan Streib
Every time I've had a factory windshield replaced I ended up with leaks within a year or two. Twice on a VW and once on a Dodge Caravan. I suspect this is because of cost-cutting on the part of the glass shop in choice of gasket. I'm going to be replacing the window gaskets (front and rear) on m

Re: [MBZ] Mercedes Digest, Vol 64, Issue 28

2011-03-07 Thread Max Dillon
Location? Andrew is about to have an extra '85 motor that will fit... -Max -Original Message- From: mercedes-boun...@okiebenz.com [mailto:mercedes-boun...@okiebenz.com] On Behalf Of B Dike Sent: Monday, March 07, 2011 6:42 PM To: mercedes@okiebenz.com Subject: Re: [MBZ] Mercedes Digest,

Re: [MBZ] valve stem seals replacement

2011-03-07 Thread Max Dillon
Thanks - that's about what I thought. -Max -Original Message- From: mercedes-boun...@okiebenz.com [mailto:mercedes-boun...@okiebenz.com] On Behalf Of Dieselhead Sent: Monday, March 07, 2011 3:13 PM To: Mercedes Discussion List Subject: Re: [MBZ] valve stem seals replacement I would not a

[MBZ] Windshield

2011-03-07 Thread Fmiser
I just had a new windshield and gasket install in my '85 TD. "Safety Inspection" is a racket... Anyway. I looked at getting PPG glass. Decided the car did not deserve one _that_ good. Ended up getting Plinkington glass and Precision gasket. The shop did some looking to find what they thought

Re: [MBZ] OT cheap Maxima available

2011-03-07 Thread Mountain Man
Mitch wrote: > A car Gordon can afford? eh... The money sounds right, but... I dunno - may need to contact the guy. mao ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubs

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread Jaime Kopchinski
Just M103 weaknesses... head gaskets and valve guides. Nothing serious enough to avoid purchase of such a car. Overall, the engine is quite good. Oh yeah, and rust, especially around the jack points in the W201. Jaime On Mon, Mar 7, 2011 at 6:12 PM, Allan Streib wrote: > Any well-known prob

Re: [MBZ] Mercedes Digest, Vol 64, Issue 28

2011-03-07 Thread B Dike
CARFAX gave conflicting answers.  Need another source... Have a 82 300CD and an 85 300CD.  Both run but not like new.  The 82 could make road trips but it is a stubborn starter in cold weather.  It has a football-sized ding in the side from a driveway incident...it was parked poorly and someone

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread WILTON
I can do without all of it. Wilton - Original Message - From: "Mitch Haley" To: "Mercedes Discussion List" Sent: Monday, March 07, 2011 5:42 PM Subject: Re: [MBZ] Thoughts on 190E 5-speed? WILTON wrote: Wonder why the temp wheel is solid blue, and what is the red button, or red l

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread Allan Streib
Any well-known problems, self-destructing wiring, or the like? Allan Jaime Kopchinski writes: > The 2.6 5 speed combo is a pretty desirable one in a W201 and you > should definitely take a look if such a car fancies you... you'll find it > quite different than a W116! The price is a bit high f

Re: [MBZ] OT cheap Maxima available

2011-03-07 Thread Mitch Haley
A car Gordon can afford? If you pay scrap for it and it runs, it's free transportation until it dies. Mitch. Dieselhead wrote: Friend of mine told me he was getting rid of his maxima. It is rusty, and should be considered "for parts" Good engine, trans, powertrain. Has some control of tran

Re: [MBZ] OT cheap Maxima available

2011-03-07 Thread Rich Thomas
I should buy that engine/trans to put in the 72 Datsun and boost it up or something. Too bad I am not near Chitown. --R On 3/7/2011 5:42 PM, Dieselhead wrote: Friend of mine told me he was getting rid of his maxima. It is rusty, and should be considered "for parts" Good engine, trans, power

[MBZ] OT cheap Maxima available

2011-03-07 Thread Dieselhead
Friend of mine told me he was getting rid of his maxima. It is rusty, and should be considered "for parts" Good engine, trans, powertrain. Has some control of transmission shift characteristics. His description: Maxima, 1993 (souped up version trans gentle, normal fast) 160k miles JN1EJ01F

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread Jaime Kopchinski
The 2.6 5 speed combo is a pretty desirable one in a W201 and you should definitely take a look if such a car fancies you... you'll find it quite different than a W116! The price is a bit high for a W201, but if the car is nice with low miles, its absolutely reasonable. For a little while I had a

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread Mitch Haley
WILTON wrote: Wonder why the temp wheel is solid blue, and what is the red button, or red light, by the light switch? I could do without: Red steering wheel rim. Hideous red gauges with yellow needles. Subwoofers in the trunk, behind the fuel tank. Are they supposed to make the trunk lid buzz,

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread WILTON
Wonder why the temp wheel is solid blue, and what is the red button, or red light, by the light switch? Wilton - Original Message - From: "Rolf" To: Sent: Monday, March 07, 2011 5:01 PM Subject: Re: [MBZ] Thoughts on 190E 5-speed? You know for double the price you could have won t

Re: [MBZ] (no subject)

2011-03-07 Thread Mountain Man
You realize Kleb does have another forum for this kind of banter. Banned is the forum where this type of chatter is acceptable. I have been banned from this austere group for use of words less than this. Be aware. mao ___ http://www.okiebenz.com For new and used

Re: [MBZ] Can someone please check the title on this car?

2011-03-07 Thread Fmiser
> B Dike wrote: > WAULT68E13A261320  None of us here own a car VIN search company. (so far as I know) I hear CarFax is good choice. http://www.carfax.com/ > Also, I'm selling my 300CDs and moving to 240Ds...the 4 cyls > are better for the kids...both need new motors...send me a > note if you e

Re: [MBZ] California Version - 1985 300TD

2011-03-07 Thread David Bruckmann
The TDM lists specific models with this "won't shift down" behaviour. Some 123/124/201 models behave differently than others, and as you say the shift gate pattern is no particular indicator. Specifically, the 1984/85 190E 2.3 and 190D 2.2 are listed in the TDM, but it presumably boils down to a

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread Rolf
You know for double the price you could have won this : http://cgi.ebay.com/ebaymotors/Mercedes-Benz-E-Class-E-class-e36-Mercedes-Benz-300-series-Renntech-ce36-_W0QQcmdZViewItemQQhashZitem27b9174bd4QQitemZ170609036244QQptZUSQ5fCarsQ5fTrucks Not a stick and the interior is a bit shocking but I be

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread Allan Streib
Worth anything close to the asking price ($3K) ? Allan On Mon, 07 Mar 2011 11:13 -0800, "John Freer" wrote: > Looks to be a 2.6 I6very rare. > John > > On Mon, Mar 7, 2011 at 10:51 AM, Allan Streib > wrote: > > http://bloomington.craigslist.org/cto/2232006384.html > > > > Anyone have anyth

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread andrew strasfogel
I didn't own it - I just did a test drive. GIven time I might have grown fond... On Mon, Mar 7, 2011 at 2:01 PM, Alex Chamberlain wrote: > On Mon, Mar 7, 2011 at 10:58 AM, andrew strasfogel > wrote: > > I test drove a 1986 300E five-speed before SWMBO purchased her 1985 > 300CD. > > It was quit

Re: [MBZ] valve stem seals replacement

2011-03-07 Thread Dieselhead
I would not advise "doing your own," If your head needs guides, I'd leave that to a auto machine shop. If it only needs seals, then yes, you can easily DIY. A good way to find a good machine shop is to talk to they guys in the back of your favorite stealership. Find out who they use. Go to

Re: [MBZ] valve stem seals replacement

2011-03-07 Thread Max Dillon
Tell me more about valve stem seals for an OM603. Would you (or the list) advice doing my own valve job on my OM603 head, if it is not cracked? Very respectfully, /s/ Max Dillon '87 300TD 334k miles '95 E300 280k miles '73 Balboa 20 Charleston SC From: Di

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread Max Dillon
I had an '84 190D 2.2, five speed, and it was an absolute blast. I do regret selling that car. I'd pick up a nice 190 five speed, gasser or diesel, if the price was right and I could convince SWMBO. My biggest beef against the 201's is that the interiors are very cheap. Another odd aspect wa

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread Mitch Haley
I doubt it's a dogleg, probably the regular up for first arrangement. I don't see any evidence of other 2.3-16 parts, like spoilers, wheel arches, or seats. Rated 19 city, 27hwy in 1989, which puts it almost as good as an old 3.8L Taurus. Mitch. Rolf wrote: I have a 5spd in my 87 300d. Not su

Re: [MBZ] valve stem seals replacement

2011-03-07 Thread Dieselhead
Ok, sorry The SDL is the only one I ever did "in situ." It smoked on startup and had high oil consumption. After I did the new seals and chain, and switched it to M1, the oil consumption dropped to about the same as a new engine, and the smoking stopped. I used to lay a navy-type smoke scr

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread John Freer
Looks to be a 2.6 I6very rare. John On Mon, Mar 7, 2011 at 10:51 AM, Allan Streib wrote: > http://bloomington.craigslist.org/cto/2232006384.html > > Anyone have anything similar?  I don't have any experience with this > particular model.  Thought I might take a look at it, though I just boug

Re: [MBZ] Save the Date-2011 ChowdaQ

2011-03-07 Thread Walt Zarnoch
I know in scouts we would do dutch oven peach cobbler on the remains of a wood fire, if you bring the oven and have a bonfire, might want to try it. Sounds like I'll have to see if I can make the "end of the world" 2012 edition of this event. :) Mercedes content: the engine is too cold to touch..

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread Alex Chamberlain
On Mon, Mar 7, 2011 at 10:58 AM, andrew strasfogel wrote: > I test drove a 1986 300E five-speed before SWMBO purchased her 1985 300CD. > It was quite BORING. > Really? How come? You seem to be in the minority---there are a few people who have a stick 124 on the PeachParts forum, and they all se

Re: [MBZ] New Stereo for Red

2011-03-07 Thread Fmiser
> Luther's Benz wrote: > If you remove the console pannel to access the fader switch, > there are 4 connectors there, one for each speaker.  Tap > in there for clean access to your speakers without going into > the dash. If you don't mind using the light gauge wire the factory installed. -- Ph

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread Rolf
I have a 5spd in my 87 300d. Not sure of the gearing on the 190 but at 60mph I am turning around 1700rpm. That may be a dogleg 5speed. -Rolf On 03/07/2011 01:51 PM, Allan Streib wrote: http://bloomington.craigslist.org/cto/2232006384.html Anyone have anything similar? I don't have any experi

Re: [MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread andrew strasfogel
I test drove a 1986 300E five-speed before SWMBO purchased her 1985 300CD. It was quite BORING. On Mon, Mar 7, 2011 at 1:51 PM, Allan Streib wrote: > http://bloomington.craigslist.org/cto/2232006384.html > > Anyone have anything similar? I don't have any experience with this > particular model.

[MBZ] Thoughts on 190E 5-speed?

2011-03-07 Thread Allan Streib
http://bloomington.craigslist.org/cto/2232006384.html Anyone have anything similar? I don't have any experience with this particular model. Thought I might take a look at it, though I just bought that W116 so I really can't take on another car right now. Plus it's not a diesel. Allan __

Re: [MBZ] Driving a 240D was Save the Date-2011 ChowdaQ

2011-03-07 Thread Tim C
Right after I got the 74 240D, I was heading to work on the interstate. The car was still pretty new to me, and I basically just floored it; no functioning speedometer, but it's a 240D, right? Anyway, I change into the exit lane and notice a cop is following me, close; he continues doing so for a

Re: [MBZ] California Version - 1985 300TD

2011-03-07 Thread Alex Chamberlain
On Sun, Mar 6, 2011 at 8:58 PM, David Bruckmann wrote: > To Curt's point: oddly, the 1984/85 190E 2.3 (201.024) and 190D 2.2 > (201.122), as well as a couple > of Euro 123, 124 and 126 gasser models, start in second no matter the > position of the shift lever. > The only way to get into first is

Re: [MBZ] valve stem seals replacement

2011-03-07 Thread Curt Raymond
I knew all that I was asking Glenn why on his car specifically... I've never had an MB I thought they'd get me anything on. My 190Ds don't give appreciable smoke or smell at idle, my 240Ds both did but were about the same and on par with other 240Ds I've seen. My '85 190D had 310,000 but had had

Re: [MBZ] Save the Date-2011 ChowdaQ

2011-03-07 Thread Curt Raymond
I've got one... Actually I was thinking another Coleman stove (I've got 4 after all) with a dutch oven... -Curt Date: Mon, 7 Mar 2011 02:10:48 + From: degco...@cox.net To: "Mercedes Discussion List" Subject: Re: [MBZ] Save the Date-2011 ChowdaQ Message-ID:     <1238329818-1299463851-cardh

Re: [MBZ] '78 240D clutch rod

2011-03-07 Thread Curt Raymond
Yeah I misunderstood Mao's point. I still don't understand his issue but now I get what he's saying. Mine works with the too new MC and rod, it just doesn't feel right and I can't help but wonder that something funny is going on inside. A funny noise persists which may or may not be related. -

Re: [MBZ] California Version - 1985 300TD

2011-03-07 Thread Curt Raymond
Hmm, another slight bit of confusion... If I shift into L, then 2 then L again it'll go into first at a standstill... It still needs adjustment, its hard to get it into first with the pedal. -Curt --- On Sun, 3/6/11, David Bruckmann wrote: From: David Bruckmann Subject: Re: California Versio

[MBZ] Can someone please check the title on this car?

2011-03-07 Thread B Dike
WAULT68E13A261320  Also, I'm selling my 300CDs and moving to 240Ds...the 4 cyls are better for the kids...both need new motors...send me a note if you either of them or any parts. Thanks, Bruce ___ http://www.okiebenz.com For new and used parts go to ww

Re: [MBZ] (no subject)

2011-03-07 Thread Walt Zarnoch
Skynet has awoke, and is contacting MB owners? Walt On Mar 7, 2011 11:20 AM, "Peter Hertzing" wrote: > Sorry- my smart phone is smarter than I. > > Peter > > On Mon, Mar 7, 2011 at 8:57 AM, andrew strasfogel wrote: > >> Let's keep political discussion off this forum, please! >> >> On Mon, Mar 7,

Re: [MBZ] (no subject)

2011-03-07 Thread Peter Hertzing
Sorry- my smart phone is smarter than I. Peter On Mon, Mar 7, 2011 at 8:57 AM, andrew strasfogel wrote: > Let's keep political discussion off this forum, please! > > On Mon, Mar 7, 2011 at 9:29 AM, Rich Thomas < > richthomas79td...@constructivity.net> wrote: > > > I agree. > > > > --R > > > > >

Re: [MBZ] Today's Work: Changing a W124's Headlight Switch

2011-03-07 Thread Alex Chamberlain
On Sun, Mar 6, 2011 at 9:23 PM, Craig wrote: > The instructions I got from Alex Chamberlain and Peter Frederick were > quite helpful. Glad to hear it! I must have forgot to tell you to detach the hood release mechanism. Looks like it went OK with it in place, though. When you get that panel un

[MBZ] OT Ferrari pron

2011-03-07 Thread Rolf
http://www.snotr.com/video/1987 ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/merced

Re: [MBZ] (no subject)

2011-03-07 Thread andrew strasfogel
Let's keep political discussion off this forum, please! On Mon, Mar 7, 2011 at 9:29 AM, Rich Thomas < richthomas79td...@constructivity.net> wrote: > I agree. > > --R > > > On 3/7/2011 8:00 AM, Peter Hertzing wrote: > >> >> ___ >> http://www.okiebenz.com >> For

Re: [MBZ] Save the Date-2011 ChowdaQ

2011-03-07 Thread Dieselhead
Why! Here is there of course! Where is "here"? ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/ma

Re: [MBZ] 300TD manual trans in MI

2011-03-07 Thread andrew strasfogel
No problem - "*Pretty much a complete car*, ready for restoration" On Mon, Mar 7, 2011 at 6:48 AM, Mitch Haley wrote: > Allan Streib wrote: > > http://louisville.craigslist.org/cto/2247755027.html >> > > $15,000? > Is a W136 170S worth as much as a W186 300 Adenauer? > > Mitch. > > > ___

Re: [MBZ] Save the Date-2011 ChowdaQ

2011-03-07 Thread andrew strasfogel
Where is "here"? On Sun, Mar 6, 2011 at 10:30 PM, wrote: > Sounds delicious. I was wondering about a propane seafood boil kettle-they > are common here & have baskets-I don't know if they would get hot enough > for oil. > Dwight > Sent from my Verizon Wireless BlackBerry > > -Original Messa

Re: [MBZ] (no subject)

2011-03-07 Thread Rich Thomas
I agree. --R On 3/7/2011 8:00 AM, Peter Hertzing wrote: ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.

Re: [MBZ] OM603 Valve Tick Diagnoses and Fix

2011-03-07 Thread Luther's Benz
Ebay seller and he had already pulled the engine and condemned it.  He was selling the body only.  I messaged him and asked if he wanted to sell the head also.  $550 later, it was shipped to me :) Luther -- Sent from my Palm Pre On Mar 7, 2011 2:56 AM, Max Dillon wrot

Re: [MBZ] 300TD manual trans in MI

2011-03-07 Thread toms cat1
I don't know what it is worth, but here is another one no asking price listed. No affiliation, etc. http://newyork.craigslist.org/fct/cto/2248858454.html 1951 Mercedes (Milford, Ct.) Date: 2011-03-05, 1:55PM EST Reply to: sale-ujgtc-2248858...@craigslist.org [Errors when replying

[MBZ] (no subject)

2011-03-07 Thread Peter Hertzing
___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Re: [MBZ] 300TD manual trans in MI

2011-03-07 Thread Mitch Haley
Allan Streib wrote: http://louisville.craigslist.org/cto/2247755027.html $15,000? Is a W136 170S worth as much as a W186 300 Adenauer? Mitch. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okieb

Re: [MBZ] Save the Date-2011 ChowdaQ

2011-03-07 Thread Mitch Haley
degco...@cox.net wrote: We need to find a propane fired fry kettle. The best sales on propane turkey fryers are right after Thanksgiving, or watch the yard sales in the spring. Most of them will hold 4-5 gallons of oil and 1-2 gallons of turkey. ___ http:

Re: [MBZ] OM603 Valve Tick Diagnoses and Fix

2011-03-07 Thread Max Dillon
If your 140 rodbender dies again I'll buy the head for $500 if its a good head. Very respectfully, /s/ Max Dillon '87 300TD 334k miles '95 E300 280k miles '73 Balboa 20 Charleston SC From: Kaleb C. Striplin To: Mercedes Discussion List Sent: Sat, March 5, 20

Re: [MBZ] OM603 Valve Tick Diagnoses and Fix

2011-03-07 Thread Max Dillon
It is a lifter, starved of oil due to failed head gasket. Very respectfully, /s/ Max Dillon '87 300TD 334k miles '95 E300 280k miles '73 Balboa 20 Charleston SC From: Kaleb C. Striplin To: Mercedes Discussion List Sent: Sat, March 5, 2011 9:53:58 AM Subject:

Re: [MBZ] OM603 Valve Tick Diagnoses and Fix

2011-03-07 Thread Max Dillon
Luther, I like it! So you found a seller trying to get rid of whole car, and made an offer? How much did you pay? Very respectfully, /s/ Max Dillon '87 300TD 334k miles '95 E300 280k miles '73 Balboa 20 Charleston SC From: Benz Hogs To: Mercedes Discussion