Re: [MBZ] My shaky front end is FIXED on my 95 E300D
Robert wrote: Over the weekend I changed center steering link, the right tie rod assembly, and the idler arm bushing. The left tie rod assembly was changed earlier. Alignment must be pretty close as I do not sense any pull one direction or the other. A _mis-match_ in caster will cause the car to lead one side or the other. An incorrect caster, or camber, or toe-in will not cause the car to lead. What you replaced sure could have an effect on toe-in. In fact, if it was close to right with the worn parts, I'll bet it wrong now. And that will NOT reveal itself by making the car lead to one side. It can make the steering over-sensitive or sluggish on center. And it will cause rapid tire wear. I figured out a way to do my own toe-in adjustment (on my 123s). It's probably adaptable to your car - but I don't know the specs. My writeup is here: http://host-a.net/u/fmiser/w123-toein-alignment_howto_screen.pdf ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] My shaky front end is FIXED on my 95 E300D
If you replace a tie rod end and don't get the length right, the car won't necessarily pull, but the toe-in will be incorrect and the steering wheel will be off center. If you get the center link wrong, the steering wheel will be off center. If your steering wheel is centered, you're probably OK, unless both parts are out of adjustment and moving the wheel in opposite directions. BTW, were you the fellow with the 94-95 300D that was out of service for an extended time while waiting for a vacuum pump or oil pump or something after the vacuum pump self destructed? Mitch. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] what do you guys use to clean/clear plastic headlight lenses
Glenn.I have had good results with the Sylvania kit. Lasted 2 years 'til the car got tree'd. Fred Moir.Lynn MA.Diesel preferred. To: mercedes@okiebenz.com Date: Wed, 24 Jun 2015 17:04:25 -0400 Subject: [MBZ] what do you guys use to clean/clear plastic headlight lenses From: mercedes@okiebenz.com CC: g_010...@hotmail.com What do you guys use to clean/clear plastic headlight lenses? TIA See ya', stay healthy. Glenn ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] what do you guys use to clean/clear plastic headlight lenses
On my Golf I bought glass ones. Whatever system you use, a couple coats of automotive clear coat will protect them much better than the polish in the kits. Peter ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT: Compressed air storage
She gave a speech (more like an 8th grader reading a report to the class) that was incredibly annoying. I couldn't even understand what she was saying, the delivery was so bad. She should just do a Max Headroom and have a computer monitor read whatever it is she might want to say to the selected audiences. She was known to my wife's cousin's family as Lardass when she visited them. My FIL used to laugh about that. I think the cousin is Terry McAuliffe, now gubnah of VA, but might have been another one (big Irish family) who knew her before Bill. --R On 6/24/15 5:01 PM, Greg Fiorentino via Mercedes wrote: ...queen hillary holds the record for production... I don't know how you can say that; she hardly says anything these days. Rather than speak and expose her statements to the analysis of (the few remaining) critical thinkers, she prefers to run on her record...or at least her plumbing structure. Greg -Original Message- From: Mercedes [mailto:mercedes-boun...@okiebenz.com] On Behalf Of G Mann via Mercedes Sent: Wednesday, June 24, 2015 1:05 PM To: Mercedes Discussion List Cc: G Mann Subject: Re: [MBZ] OT: Compressed air storage I hate to poke a hole in your new found love of compressed air, but... queen hillary holds the record for production, now if we can just find a storage facility... Ft. Leavenworth Federal should work nicely... Gotta run.. I'm late for the shareholders meeting for Uranium Mines... On Wed, Jun 24, 2015 at 12:58 PM, Andrew Strasfogel via Mercedes mercedes@okiebenz.com wrote: The Republican debates, including the Plan B debacle for junior varsity (not-ready-for-prime-time) candidates, would be a great way to test that concept. The hot air emanating from these bloviators would generate awesome pressure and take forever to cool. On Wed, Jun 24, 2015 at 3:39 PM, fmiser via Mercedes mercedes@okiebenz.com wrote: Andrew wrote: I used to think this was an elaborate hoax. Now I am leading in the other direction (non-hoax). Canadian-based company NRStor Inc. set its sights on solving the complicated and critical problem of energy storage with technology that would compress air and store it in salt caverns to backup the grid when the wind isn't blowing. Interesting idea. I think if there is a hill that pumping water to the top will probably have less losses. One issue with compressed gas is the act of compressing it makes it hot, and for long term storage that heat will be lost. The greater the pressure, the greater the heat and the greater the loss. If they have figured out a way to effectively use low-pressure air to generate electricity, it might work out really good. But if it's just a turbine, high pressure makes the turbine more effective, so there will be a compromise either way. Short term storage - as in day vs night - the heat could be retained and then the system looks pretty good. Except for the explosion dangers. -- Philip, speaking before reading up on the details ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT: Compressed air storage
I also was thinking of the heat of compression, and that storing it in caves would cool it considerably, but then read NRStor is joining up with Massachusetts-based General Compression Inc., which developed a compressed-air technology that uses heat exchangers in a so-called near-isothermal process instead of fuel. There have to be losses in the heat exchange process, and to what are the pumping the heat? I guess if they heat water high enough with the heat, they could use it to drive turbines as well. My geothermal heat pump heats the water heater with excess heat in the summer, I guess they could do the same. I do think that using gravity to store the excess energy via pumping it up hill, and letting it run down through a turbine would be better though. On Wed, Jun 24, 2015 at 2:39 PM, fmiser via Mercedes mercedes@okiebenz.com wrote: Interesting idea. I think if there is a hill that pumping water to the top will probably have less losses. One issue with compressed gas is the act of compressing it makes it hot, and for long term storage that heat will be lost. The greater the pressure, the greater the heat and the greater the loss. If they have figured out a way to effectively use low-pressure air to generate electricity, it might work out really good. But if it's just a turbine, high pressure makes the turbine more effective, so there will be a compromise either way. Short term storage - as in day vs night - the heat could be retained and then the system looks pretty good. Except for the explosion dangers. -- Philip, speaking before reading up on the details -- OK Don NSA: The only branch of government that actually listens to US citizens! *“Travel is fatal to prejudice, bigotry and narrow-mindedness, and many of our people need it sorely on these accounts.”* – Mark Twain There are three kinds of men: The ones that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves. WILL ROGERS, *The Manly Wisdom of Will Rogers* 2013 F150, 18 mpg 2012 Passat TDI DSG, 44 mpg 1957 C182A, 12 mpg - but at 150 mph! ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] what do you guys use to clean/clear plastic headlight lenses
On June 24, 2015 at 5:04 PM G. M. Brown via Mercedes mercedes@okiebenz.com wrote: What do you guys use to clean/clear plastic headlight lenses? TIA They're no longer clear? http://www.amazon.com/Sylvania-HRK-BX-SYLVANIA-Headlight-Restoration/dp/B00429NKWK ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] endoscope light cam
I have an old Android phone, I might get one of these for looking up under the dash and other somewhat inaccessible places. cheepcheepchinee stuff. I just ordered a small laser engraver from this outfit, it showed up DHL airfreight from China in 5 days, free shipping. Amazing. --R http://www.banggood.com/Mini-Android-Endoscope-Waterproof-Inspection-Tube-Camera-6-LED-7mm-Lens-p-981307.html ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] endoscope light cam
So you're starting a colonoscopy practice now? ;) Wilton - Original Message - From: Rich Thomas via Mercedes mercedes@okiebenz.com To: Mercedes Discussion List mercedes@okiebenz.com Cc: Rich Thomas richthomas79td...@constructivity.net Sent: Wednesday, June 24, 2015 10:23 AM Subject: [MBZ] endoscope light cam I have an old Android phone, I might get one of these for looking up under the dash and other somewhat inaccessible places. cheepcheepchinee stuff. I just ordered a small laser engraver from this outfit, it showed up DHL airfreight from China in 5 days, free shipping. Amazing. --R http://www.banggood.com/Mini-Android-Endoscope-Waterproof-Inspection-Tube-Camera-6-LED-7mm-Lens-p-981307.html ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] endoscope light cam
Too bad it is android. I have an unknown OM616 I'd like to see inside the cylinders of. I like smart people with dumb phones better than dumb people with smart phones. My old real motorola has way better sound that the smart toys with a by the way phone app. No interest in a android smart toy. I have an old Android phone, I might get one of these for looking up under the dash and other somewhat inaccessible places. cheepcheepchinee stuff. I just ordered a small laser engraver from this outfit, it showed up DHL airfreight from China in 5 days, free shipping. Amazing. --R http://www.banggood.com/Mini-Android-Endoscope-Waterproof-Inspection-Tube-Camera-6-LED-7mm-Lens-p-981307.html ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] My shaky front end is FIXED on my 95 E300D
Nice. I'll defer to Wilton for the requisite congratulatory note. Dan Sent from my iPad On Jun 23, 2015, at 9:41 PM, Robert Massmann via Mercedes mercedes@okiebenz.com wrote: Over the weekend I changed center steering link, the right tie rod assembly, and the idler arm bushing. The left tie rod assembly was changed earlier. I no longer get the front end shake above sixty. I actually need to be careful to watch my speed as I did like the vibration I had above 60 mph. I also had all ( 4 ) tires balance rechecked. I could see wear on the OD of Idler arm bushings. Not sure what part or combination of parts fixed the issue, but it is gone. Alignment must be pretty close as I do not sense any pull one direction or the other. Happy motoring now! Bob Massmann 1995 E300D 420K miles ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] My shaky front end is FIXED on my 95 E300D
You mean ATTABOY!? BTW, they're not proprietary? ;) Wilton - Original Message - From: Dan Penoff via Mercedes mercedes@okiebenz.com To: Mercedes Discussion List mercedes@okiebenz.com Cc: Dan Penoff d...@penoff.com Sent: Wednesday, June 24, 2015 9:17 AM Subject: Re: [MBZ] My shaky front end is FIXED on my 95 E300D Nice. I'll defer to Wilton for the requisite congratulatory note. Dan Sent from my iPad On Jun 23, 2015, at 9:41 PM, Robert Massmann via Mercedes mercedes@okiebenz.com wrote: Over the weekend I changed center steering link, the right tie rod assembly, and the idler arm bushing. The left tie rod assembly was changed earlier. I no longer get the front end shake above sixty. I actually need to be careful to watch my speed as I did like the vibration I had above 60 mph. I also had all ( 4 ) tires balance rechecked. I could see wear on the OD of Idler arm bushings. Not sure what part or combination of parts fixed the issue, but it is gone. Alignment must be pretty close as I do not sense any pull one direction or the other. Happy motoring now! Bob Massmann 1995 E300D 420K miles ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] ADMIN - REMINDER
Thanks Dan this is helpful. On Jun 24, 2015 10:00 PM, Dan Penoff via Mercedes mercedes@okiebenz.com wrote: Just a friendly reminder from the ListMom: If you get a hold notice because of an attachment, message being too big, etc., please drop me a note directly and let me know. I ask because the amount of spam we get hit with on a daily basis is staggering, and if something is in the queue from a subscriber there’s nothing that makes it stand out, meaning I have to sift through literally hundreds of messages about male enhancement, parts suppliers, Nigerian bankers, etc., etc., etc., before I can find your message and approve it. If you give me a heads up I’ll have a time stamp that’s relative close to the time you sent the message, giving me the ability to narrow down the location in the queue and cutting down on the amount of time it takes to find it. Also, if I don’t know you have a message being held, there’s a good chance I’ll miss it and it will go into the bit bucket with the rest of the garbage. Thank you. Dan/Mom/Martha, whatever ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] ADMIN -
Just a friendly reminder from the ListMom: Thanks Mom Thanks Ma Kleb ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] My shaky front end is FIXED on my 95 E300D
Center link on this car is fixed, thank goodness. The tie rod was set with a narrow metal tape measure and wrapped it around the whole assembly, kind a like measure circumference and set the new one to the same measurement as the old one. It seemed to work great as the steering wheel is the same as before the work. Have an appointment for an alignment tomorrow. An no I am not the one with oil vacuum pump issue. Bob Massmann Oregonia, Oh 1995 E300D 420k miles -Original Message- From: Mitch Haley via Mercedes Sent: Wednesday, June 24, 2015 5:47 AM To: Mercedes Discussion List Cc: Mitch Haley Subject: Re: [MBZ] My shaky front end is FIXED on my 95 E300D If you replace a tie rod end and don't get the length right, the car won't necessarily pull, but the toe-in will be incorrect and the steering wheel will be off center. If you get the center link wrong, the steering wheel will be off center. If your steering wheel is centered, you're probably OK, unless both parts are out of adjustment and moving the wheel in opposite directions. BTW, were you the fellow with the 94-95 300D that was out of service for an extended time while waiting for a vacuum pump or oil pump or something after the vacuum pump self destructed? Mitch. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT: Compressed air storage
In the interest of trying not to inflame anyone s passions I will withhold any caustic comments and just ask a compound question. In another segment of life, I was task with extraction of useful information from prisoners. It is a given that they lie, so the pattern of interrogation always followed that the questions would follow the lies which always became compound in depth and scope, ie layers of lies... sooner or later, the interrogated individual would reach a realization that they were trapped, with no way out, and that I had revealed their first set of lies through investigation of the second and third set of lies [these sessions had no time limit]. Always at that point, there was a physical tell [skilled people in the business knew what to look for] that would then be followed by clamming up. Then followed by attempts to coverup the previous sets of lies... ie the devil made me do it. This silent period was always the key point in interrogation, because suddenly, the trap of their own making had slammed on them and there was a degree of panic, knowing the jig was up.. Any new story would cause incrimination, and revelation of events and guilt. Is Hillary in that place about now? Does anything she may say serve to illuminate the untruths that make up her past actions?.. Did destruction of the file server and emails break the law? Did she sell influence to foreign persons while holding Sec of State office? How involved was she in the sale of Uranium mining [a DOD controlled substance] to foreign nationals while holding public office? Did the Clinton Foundation launder foreign funds? Should she be held accountable and investigated? Or What difference does it make now? On Wed, Jun 24, 2015 at 2:01 PM, Greg Fiorentino via Mercedes mercedes@okiebenz.com wrote: ...queen hillary holds the record for production... I don't know how you can say that; she hardly says anything these days. Rather than speak and expose her statements to the analysis of (the few remaining) critical thinkers, she prefers to run on her record...or at least her plumbing structure. Greg -Original Message- From: Mercedes [mailto:mercedes-boun...@okiebenz.com] On Behalf Of G Mann via Mercedes Sent: Wednesday, June 24, 2015 1:05 PM To: Mercedes Discussion List Cc: G Mann Subject: Re: [MBZ] OT: Compressed air storage I hate to poke a hole in your new found love of compressed air, but... queen hillary holds the record for production, now if we can just find a storage facility... Ft. Leavenworth Federal should work nicely... Gotta run.. I'm late for the shareholders meeting for Uranium Mines... On Wed, Jun 24, 2015 at 12:58 PM, Andrew Strasfogel via Mercedes mercedes@okiebenz.com wrote: The Republican debates, including the Plan B debacle for junior varsity (not-ready-for-prime-time) candidates, would be a great way to test that concept. The hot air emanating from these bloviators would generate awesome pressure and take forever to cool. On Wed, Jun 24, 2015 at 3:39 PM, fmiser via Mercedes mercedes@okiebenz.com wrote: Andrew wrote: I used to think this was an elaborate hoax. Now I am leading in the other direction (non-hoax). Canadian-based company NRStor Inc. set its sights on solving the complicated and critical problem of energy storage with technology that would compress air and store it in salt caverns to backup the grid when the wind isn't blowing. Interesting idea. I think if there is a hill that pumping water to the top will probably have less losses. One issue with compressed gas is the act of compressing it makes it hot, and for long term storage that heat will be lost. The greater the pressure, the greater the heat and the greater the loss. If they have figured out a way to effectively use low-pressure air to generate electricity, it might work out really good. But if it's just a turbine, high pressure makes the turbine more effective, so there will be a compromise either way. Short term storage - as in day vs night - the heat could be retained and then the system looks pretty good. Except for the explosion dangers. -- Philip, speaking before reading up on the details ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:
Re: [MBZ] ADMIN - REMINDER
The reason we have so much spam is because I had to turn down the spam filters because people were whining about their mail getting occasional caught by the filters, so the flood gates opened. It's a no win scenario Sent from my iPhone On Jun 24, 2015, at 8:59 PM, Dan Penoff via Mercedes mercedes@okiebenz.com wrote: Just a friendly reminder from the ListMom: If you get a hold notice because of an attachment, message being too big, etc., please drop me a note directly and let me know. I ask because the amount of spam we get hit with on a daily basis is staggering, and if something is in the queue from a subscriber there’s nothing that makes it stand out, meaning I have to sift through literally hundreds of messages about male enhancement, parts suppliers, Nigerian bankers, etc., etc., etc., before I can find your message and approve it. If you give me a heads up I’ll have a time stamp that’s relative close to the time you sent the message, giving me the ability to narrow down the location in the queue and cutting down on the amount of time it takes to find it. Also, if I don’t know you have a message being held, there’s a good chance I’ll miss it and it will go into the bit bucket with the rest of the garbage. Thank you. Dan/Mom/Martha, whatever ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] My shaky front end is FIXED on my 95 E300D
That sounds like me. Had to replace vacuum pump and timer, re-seal all the delivery valves, then found a complete suspension rebuild was needed, front and rear. -- Max Dillon Charleston SC '87 300TD '95 E300 On June 24, 2015 5:47:08 AM EDT, Mitch Haley via Mercedes mercedes@okiebenz.com wrote: BTW, were you the fellow with the 94-95 300D that was out of service for an extended time while waiting for a vacuum pump or oil pump or something after the vacuum pump self destructed? Mitch. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] ADMIN - REMINDER
Just a friendly reminder from the ListMom: If you get a hold notice because of an attachment, message being too big, etc., please drop me a note directly and let me know. I ask because the amount of spam we get hit with on a daily basis is staggering, and if something is in the queue from a subscriber there’s nothing that makes it stand out, meaning I have to sift through literally hundreds of messages about male enhancement, parts suppliers, Nigerian bankers, etc., etc., etc., before I can find your message and approve it. If you give me a heads up I’ll have a time stamp that’s relative close to the time you sent the message, giving me the ability to narrow down the location in the queue and cutting down on the amount of time it takes to find it. Also, if I don’t know you have a message being held, there’s a good chance I’ll miss it and it will go into the bit bucket with the rest of the garbage. Thank you. Dan/Mom/Martha, whatever ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] ADMIN - REMINDER
I have no complaints, as I pretty much go in once a day and just dump everything. I gave up trying to sift through it a while back, as it was an exercise in futility. I just found that if people give me a heads up that they got a hold notice I can go in and release their message easily because having a time stamp gives me a point of reference. Otherwise, there’s nothing in the queue that distinguishes a member’s message from anything else. Dan On Jun 24, 2015, at 10:09 PM, Kaleb C. Striplin via Mercedes mercedes@okiebenz.com wrote: The reason we have so much spam is because I had to turn down the spam filters because people were whining about their mail getting occasional caught by the filters, so the flood gates opened. It's a no win scenario Sent from my iPhone ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] My shaky front end is FIXED on my 95 E300D
Delivery valve seals is an F or G service item. Need to be replaced every 120,000 to 240,000 miles, depending on age and how much bioD goes through the pump. Heavy bioD use and you either need viton orings or replacement every year or so. If is that DDD and service? E service would be DD. That sounds like me. Had to replace vacuum pump and timer, re-seal all the delivery valves, then found a complete suspension rebuild was needed, front and rear. -- Max Dillon Charleston SC '87 300TD '95 E300 ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] ADMIN - REMINDER
I'm thinking about upping the size limit but the problem is it won't catch when somebody quotes the whole digest. Sent from my iPhone On Jun 24, 2015, at 9:13 PM, Dan Penoff via Mercedes mercedes@okiebenz.com wrote: I have no complaints, as I pretty much go in once a day and just dump everything. I gave up trying to sift through it a while back, as it was an exercise in futility. I just found that if people give me a heads up that they got a hold notice I can go in and release their message easily because having a time stamp gives me a point of reference. Otherwise, there’s nothing in the queue that distinguishes a member’s message from anything else. Dan On Jun 24, 2015, at 10:09 PM, Kaleb C. Striplin via Mercedes mercedes@okiebenz.com wrote: The reason we have so much spam is because I had to turn down the spam filters because people were whining about their mail getting occasional caught by the filters, so the flood gates opened. It's a no win scenario Sent from my iPhone ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] endoscope light cam
I know a lot of, uh, you know, so it makes sense. --R On 6/24/15 10:28 AM, WILTON via Mercedes wrote: So you're starting a colonoscopy practice now? ;) Wilton - Original Message - From: Rich Thomas via Mercedes mercedes@okiebenz.com To: Mercedes Discussion List mercedes@okiebenz.com Cc: Rich Thomas richthomas79td...@constructivity.net Sent: Wednesday, June 24, 2015 10:23 AM Subject: [MBZ] endoscope light cam I have an old Android phone, I might get one of these for looking up under the dash and other somewhat inaccessible places. cheepcheepchinee stuff. I just ordered a small laser engraver from this outfit, it showed up DHL airfreight from China in 5 days, free shipping. Amazing. --R http://www.banggood.com/Mini-Android-Endoscope-Waterproof-Inspection-Tube-Camera-6-LED-7mm-Lens-p-981307.html ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] endoscope light cam
Beat me! -- Max Dillon Charleston SC '87 300TD '95 E300 On June 24, 2015 10:28:27 AM EDT, WILTON via Mercedes mercedes@okiebenz.com wrote: So you're starting a colonoscopy practice now? ;) Wilton ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] endoscope light cam
Why do you need an endoscopy? M can't get you appointment at MUSC? ;) -- Max Dillon Charleston SC '87 300TD '95 E300 ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] Papal Bull
Interesting interview on the first part of this recording. Interviewer is a is one of the top rated in the country. (faint of heart Katolischers may be offended) http://www.whoradio.com/onair/mickelson-in-the-morning-7738/papal-bull-13708377/ Curly Lifelong Conservationist hereditary conservationist; Aldo Leopold and my grandfather were good friends for life, and I suspect my grandfather taught Aldo about Conservation. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] My shaky front end is FIXED on my 95 E300D
On Wed, 24 Jun 2015 10:25:24 -0400 WILTON via Mercedes mercedes@okiebenz.com wrote: From: Dan Penoff via Mercedes mercedes@okiebenz.com To: Mercedes Discussion List mercedes@okiebenz.com Cc: Dan Penoff d...@penoff.com Sent: Wednesday, June 24, 2015 9:17 AM Subject: Re: [MBZ] My shaky front end is FIXED on my 95 E300D Nice. I'll defer to Wilton for the requisite congratulatory note. Dan You mean ATTABOY!? BTW, they're not proprietary? ;) They certainly are not proprietary, but many on the list feel deferring to our elder statesman is the proper protocol. Craig ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] endoscope light cam
This one is USB and is cheaper. http://www.banggood.com/5m-5_5mm-6LED-USB-Borescope-Waterproof-Inspection-Snake-Tube-Camera-p-951194.html 5m 5.5mm 6LED USB Borescope Waterproof Inspection Snake Tube Camera * http://www.banggood.com/5m-5_5mm-6LED-USB-Borescope-Waterproof-Inspection-Snake-Tube-Camera-reviews-p951194.html$17.55 --R On 6/24/15 10:48 AM, Curly McLain via Mercedes wrote: Too bad it is android. I have an unknown OM616 I'd like to see inside the cylinders of. I like smart people with dumb phones better than dumb people with smart phones. My old real motorola has way better sound that the smart toys with a by the way phone app. No interest in a android smart toy. I have an old Android phone, I might get one of these for looking up under the dash and other somewhat inaccessible places. cheepcheepchinee stuff. I just ordered a small laser engraver from this outfit, it showed up DHL airfreight from China in 5 days, free shipping. Amazing. --R http://www.banggood.com/Mini-Android-Endoscope-Waterproof-Inspection-Tube-Camera-6-LED-7mm-Lens-p-981307.html ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] endoscope light cam
I have to go up to Sparkleburg now --R On 6/24/15 10:29 AM, Max Dillon via Mercedes wrote: Why do you need an endoscopy? M can't get you appointment at MUSC? ;) ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] OT: Compressed air storage
The Republican debates, including the Plan B debacle for junior varsity (not-ready-for-prime-time) candidates, would be a great way to test that concept. The hot air emanating from these bloviators would generate awesome pressure and take forever to cool. On Wed, Jun 24, 2015 at 3:39 PM, fmiser via Mercedes mercedes@okiebenz.com wrote: Andrew wrote: I used to think this was an elaborate hoax. Now I am leading in the other direction (non-hoax). Canadian-based company NRStor Inc. set its sights on solving the complicated and critical problem of energy storage with technology that would compress air and store it in salt caverns to backup the grid when the wind isn't blowing. Interesting idea. I think if there is a hill that pumping water to the top will probably have less losses. One issue with compressed gas is the act of compressing it makes it hot, and for long term storage that heat will be lost. The greater the pressure, the greater the heat and the greater the loss. If they have figured out a way to effectively use low-pressure air to generate electricity, it might work out really good. But if it's just a turbine, high pressure makes the turbine more effective, so there will be a compromise either way. Short term storage - as in day vs night - the heat could be retained and then the system looks pretty good. Except for the explosion dangers. -- Philip, speaking before reading up on the details ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com