Thanks Loren, I'll try to remember the Bio-d suggestion for next time.
--
Max Dillon
Charleston SC
'95 E300, '87 300TD
Dieselhead 126die...@gmail.com wrote:
Uh... Diesel fuel, or better yet bioD, a brush, a toothbrush, a stack
of cotton rags and compressed air to blow it out. For the price of
I tipped the server appropriately, as usual, based on the normal price/value
of the full meal. I said in my original comments to Applebee's that I
probably missed some fine print somewhere. My concern was for the
surreptitious way in which I was charged $2.34 for a glass of tea that I
would
On Fri, 11 Nov 2011 23:23:57 -0600 Dieselhead 126die...@gmail.com wrote:
Veterans on the list!
We would not be a republic without y'all
You are welcome!
Craig
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list
Yes, indeed.
Wilton
- Original Message -
From: Craig diese...@pisquared.net
To: mercedes@okiebenz.com
Sent: Saturday, November 12, 2011 9:29 AM
Subject: Re: [MBZ] Thanks to all
On Fri, 11 Nov 2011 23:23:57 -0600 Dieselhead 126die...@gmail.com wrote:
Veterans on the list!
We
BTW, yes, it was largely my own fault; I'll make sure not to make that
mistake again.
Wilton
- Original Message -
From: WILTON wilt...@nc.rr.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Saturday, November 12, 2011 9:25 AM
Subject: Re: [MBZ] OT Re: Free meal
I tipped
BTW, yes, it was largely my own fault; I'll make sure not to make that
mistake again.
Wilton
- Original Message -
From: WILTON wilt...@nc.rr.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Saturday, November 12, 2011 9:25 AM
Subject: Re: [MBZ] OT Re: Free meal
I tipped
I learned the hard way that you have to ask for a glass of water instead of
water around here or else they will bring you a bottle of water and a glass
and put it on your bill.
If someone had told me 30 years ago you could sell bottled water for people to
drink I'd have said they were crazy -
When using a box-end wrench as a drift for installing the seals, I
presume the open end of the box is oriented down so the mouth holds
the seal and provides the contact surface to drive the seal home?
So the ring applies force more-or-less evenly around the seal.
Like using a deep socket, if
Jim Cathey j...@windwireless.net wrote:
When using a box-end wrench as a drift for installing the seals, I
presume the open end of the box is oriented down so the mouth holds
the seal and provides the contact surface to drive the seal home?
So the ring applies force more-or-less evenly
Very little traffic today, seems odd...
--
Max Dillon
Charleston SC
'95 E300, '87 300TD
___
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe
All Benzes are happy today
--R
On 11/12/11 4:23 PM, Max wrote:
Very little traffic today, seems odd...
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or
On Sat, 12 Nov 2011 17:16:34 -0500 Rich Thomas
richthomas79td...@constructivity.net wrote:
All Benzes are happy today
I'm working on our kitchen.
Craig
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives
I sell kitchen parts too!
Sent on the Sprint® Now Network from my BlackBerry®
-Original Message-
From: Craig diese...@pisquared.net
Sender: mercedes-boun...@okiebenz.com
Date: Sat, 12 Nov 2011 15:33:03
To: mercedes@okiebenz.com
Reply-To: Mercedes Discussion List mercedes@okiebenz.com
How about some help with raking leaves, trimming trees, and other
landscaping?
-Max
-Original Message-
From: mercedes-boun...@okiebenz.com [mailto:mercedes-boun...@okiebenz.com]
On Behalf Of buymbpa...@gmail.com
Sent: Saturday, November 12, 2011 5:36 PM
To: Mercedes Discussion List
I just mulch the leaves in place.
Wilton
- Original Message -
From: Max Dillon meadedil...@bellsouth.net
To: 'Mercedes Discussion List' mercedes@okiebenz.com
Sent: Saturday, November 12, 2011 5:46 PM
Subject: Re: [MBZ] Is the net down?
How about some help with raking leaves,
Today I just put an Alpine CDE-100 in the Chicken Wagon.
Hopefully that will eliminate the nasty noise that was
coming from the general vicinity of the other seat.
-- Jim
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search
WILTON wilt...@nc.rr.com wrote:
I just mulch the leaves in place.
Wilton
I'm leaning heavily in that direction. Do you use a mulching mower to chop
them up, or some other method.
--
Max Dillon
Charleston SC
'95 E300, '87 300TD
___
___
My mower (JD LX 173) has a mulching cutting deck - 3 sets (or 4; can't
remember) of blades (2 blades in each set mounted 90 degrees to each other);
deck has no discharge chute. I drive it over/through the leaves, and they
are chopped into very small pieces that sort of disappear into the
Very little on topic traffic the past few days.
My 240D is happy. starts on the first compression stroke
the project 240D is pretty happy, just waiting on
a new switch from Q so the glow comes on before
the glow. It DOES need stronger antifreeze to
survive the winter. Mañana
The 300D is
Should just about take care of all the issues with the driver's door.
Of course why wouldn't there be issues with the passenger door too?
Its exterior latch was stiff also, so I popped the door panel off to
start the remove/clean process. The passenger door panel only has two
broken hooks,
Max wrote:
I'm leaning heavily in that direction. Do you use a mulching mower to chop
them up, or some other method.
None of the lawn tractors I have access to (My dad's MTD and my own ancient Cub
Cadets) do much to leaves, but my Swisher Trail Mower chops them fine enough
that they can't
Changed the struts on the van today. Other than fighting rust, it
went ok. The second side went as fast as a pro could have done it.
Some tips:
1. rock auto had raybestos quick strut assemblies about as cheap
as anything to be found. You probably would need new upper mount
(bearing)
On Sat, 12 Nov 2011 22:36:23 + buymbpa...@gmail.com wrote:
I sell kitchen parts too!
You DO?!
Like what?
Craig
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To
Um nothing really but ...
Sent on the Sprint® Now Network from my BlackBerry®
-Original Message-
From: Craig diese...@pisquared.net
Sender: mercedes-boun...@okiebenz.com
Date: Sat, 12 Nov 2011 17:20:24
To: mercedes@okiebenz.com
Reply-To: Mercedes Discussion List
On Sat, 12 Nov 2011 19:11:14 -0500 Mitch Haley m...@voyager.net wrote:
... I just used his mower to tow my Swisher around the farm.
I was surprised to find out how much faster it went with my 60 mower
than with the 46 deck on his tractor, I think I knocked 40-50% off the
mowing time.
Craig wrote:
Three models available:
T14560 - 14.5 HP Briggs I/C.
T18560 - 18.5 HP Briggs I/C.
T1360H - 13 HP Honda GXV.
Which one do you have, Mitch?
They're all the same mower. Mine is the cheapest one with 14HP Briggs.
In real tall heavy grass, the engine struggles to keep
http://lansing.craigslist.org/cto/2695108145.html
For sale is my beloved Mercedes Benz 300SE. This car is in beautiful condition
for how old it is. Has 220,000 miles on it. IT DOES NEED WORK. it does need a
central and rear exhaust installed, I believe that it has dirty fuel injectors
I forgot to say No AFFILIATION
Mitch Haley wrote:
http://lansing.craigslist.org/cto/2695108145.html
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change
My 87 300D not so happy yesterday and today. Went out early morning
yesterday to go to hospital for intravenous immunoglobulin (IVIG) treatment;
found 300D dead; transferred elec mobility scooter to 350SDL and got to
hospital nearly on time anyway. Checked 300D for 'nother slow elec
Well, I think I've already found it - my 300D (123 kmi) is an 87 built in
Oct 86 (at least 2 years older); from what he's told us, it's in helluva lot
better condition than this 300SE, even with yesterday's slow elec discharge
on the 300D.
Wilton
- Original Message -
From: Mitch
I think he meant to add, for $700. Though if you are trying to get out
from under your 300D for that kind of money, well, I'll see you tomorrow. :)
-Tim
On Nov 12, 2011 8:57 PM, WILTON wilt...@nc.rr.com wrote:
Well, I think I've already found it - my 300D (123 kmi) is an 87 built in
Oct 86
On Sun, 13 Nov 2011 00:22:54 + buymbpa...@gmail.com wrote:
Um nothing really but ...
Oh, OK. I thought you might have a great deal on a garbage disposer ...
Craig
On Sat, 12 Nov 2011 22:36:23 + buymbpa...@gmail.com wrote:
I sell kitchen parts too!
You DO?!
Like
It would take significantly more than that.
Wilton
- Original Message -
From: Tim C bb...@crone.us
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Saturday, November 12, 2011 9:38 PM
Subject: Re: [MBZ] who needs a SWB W126 project?
I think he meant to add, for $700.
I can sell you one for about $150. When you get tired if it, it is
pretty tasty barbequed.
On Sun, 13 Nov 2011 00:22:54 + buymbpa...@gmail.com wrote:
Um nothing really but ...
Oh, OK. I thought you might have a great deal on a garbage disposer ...
Craig
On Sat, 12 Nov 2011
So the quick strut assemblies came with new springs, and you didn't need a
spring compressor to change them out?
Almost sounds too good to be true!
The heater fan has been noisy for a while now, then it refused to turn
until hit with 70 mph forced air the other day, so I ordered a new one - it
I have a great deal on a garbage disposer - come and get it. Took one out
when we replaced the kitchen sink last month - free if you pick it up.
On Sat, Nov 12, 2011 at 8:47 PM, Craig diese...@pisquared.net wrote:
On Sun, 13 Nov 2011 00:22:54 + buymbpa...@gmail.com wrote:
Um nothing
On topic???
The ML320 gave me a surprise Wed. - about two stop lights before my
destination, it started shaking at the red light. It was clearly missing on
one cylinder when I accelerated when the light changed. It did this all the
way to the destination (approx. half a mile). I plugged the OBD-II
On Sat, 12 Nov 2011 21:50:46 -0600 Dieselhead 126die...@gmail.com wrote:
I can sell you one for about $150. When you get tired if it, it is
pretty tasty barbequed.
I'm guessing this is a goat.
Craig
___
http://www.okiebenz.com
For new and used parts go
38 matches
Mail list logo