Re: [MBZ] Alternator

For $60, if it gets lost, stolen or run over, you won't cry. The $5000 fluke, most folks would cry, or at least kick the wall. I've known a few folk with the $5000 fluke, but most were paid for by a Gummit entity. > Dan wrote: To measure voltage (potential) you measure between two

Re: [MBZ] Alternator

Absolutely. I agree. Amazingly, I have an Extech meter I bought in the very early 1990s that still serves me well. It’s been around so long, if it died tomorrow I wouldn’t feel badly about it. Definitely got my money out of it. Dan > On Apr 17, 2016, at 4:10 PM, OK Don via Mercedes

Re: [MBZ] Alternator

However, if you need to buy a meter anyway, this is a good one to consider since it also measures voltage and resistance - I think I would have bought it had I seen it when I recently replaced the dead Extech I've been using for 10-15 years. http://www.mcmelectronics.com/product/72-7224 On Sun,

Re: [MBZ] Alternator

The reason I did not reference DC clamp on meters is because of their expense and relatively poor accuracy. Not surprised that there are cheap ones out there now, however, as little as I would need it, I don’t think I would invest $60 in a clamp on DC ammeter. YMMV, of course. Dan > On Apr

Re: [MBZ] Alternator

> Dan wrote: > > To measure voltage (potential) you measure between two > points to see the difference between the two points. > > To measure current you must be in series (in line) with the > circuit to be measured. Voltage is a measure of the difference in "pressure" between two points. As

Re: [MBZ] Subject: Rear Calipers for 1983 240D

Somebody recently ordered rear calipers from Advance,Autozone etc .Question is what brand / make is OK for this car. I have ATE originals on the car now. Bob Wagner reman ATE at crockauto $42 ea only one set left.

Re: [MBZ] Subject: Rear Calipers for 1983 240D

I bought a reman front right caliper for the 1997 S420 from Advance. I believe the brand on it was “Cardone”, which I think is a CarQuest brand. It’s been on the car for a year and is still working. Dan > On Apr 17, 2016, at 12:01 PM, Bob via Mercedes wrote: > >

[MBZ] Subject: Rear Calipers for 1983 240D

Somebody recently ordered rear calipers from Advance,Autozone etc .Question is what brand / make is OK for this car. I have ATE originals on the car now. Bob ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To

[MBZ] Fw: 1985 Mercedes 300CD

Not, eyc. Fred Moir. Lynn MA. Diesel preferred. 1985 Mercedes 300CD http://capecod.craigslist.org/cto/5542473376.html ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] euro alert

Good luck trying to register that is the U.S.. -- Max Dillon Charleston SC '87 300TD '95 E300 On April 17, 2016 12:30:37 AM EDT, "Kaleb C. Striplin via Mercedes" wrote:

Re: [MBZ] POSitive, again

Nothing as elegant as whatyou would do Dimitri. I cut a piece of (non microwave) tin and bedded it in silicone seal and screwed it in place. Sealed the split grommets with the same silicone seal. How did you patch holes? Sent from my iPhone On Apr 16, 2016, at 11:36 PM, Curly McLain via

Re: [MBZ] euro alert

W210 CDI in 1999, or just a OM601 or OM604?Mitch.On April 17, 2016 at 12:30 AM "Kaleb C. Striplin via Mercedes" wrote:http://www.ebay.com/itm/Mercedes-Benz-E-Class-E-220-CDI-/301931880802?forcerrptr=true=item464c8ae162:g:LSwAAOSwjMJXBzA0=301931880802