Re: [MBZ] 124 rear suspension part numbers
This reminds me that I have two NOS W124 rear subframes in my basement... I really need to do something with them at some point Jaime On Mon, Nov 4, 2019 at 10:23 AM Max Dillon via Mercedes < mercedes@okiebenz.com> wrote: > > Thanks Dan, good to know. Was easy to do without the tool when it was a > swap. > > Max Dillon > Charleston SC > > Mon Nov 04 09:51:34 EST 2019 Dan--- via Mercedes : > > > Max, > > > > The front mount(s) on your W124 differential have been replaced. Did not > do the rears as I was waiting to borrow the tool from someone. > > > > -D > > > > > >> On Nov 4, 2019, at 9:43 AM, Curley McLain via Mercedes < > mercedes@okiebenz.com> wrote: > >> > >> I have not inspected this one yet, but I have never seen the front > fail. Always been able to reuse them. MB is quite proud of em. $50 each! > crockauto only has uro for $5 each. I think I will stick with the > originals, and replace the rear donut bushings. THose are generally no > longer concentric after 25+ years. > >> > >> > >> Meade Dillon via Mercedes wrote on 11/4/19 7:27 AM: > >> > >>> Curley - note that the front differential mount requires two of that > part > >>> number (I think), it is not a kit that has all you need. Found out the > >>> hard way when I swapped in the differential from Wilton's sedan into my > >>> wagon. > >>> - > >>> Max > >>> Charleston SC > >>> > >>> > >>> > >> > >> > >> ___ > >> http://www.okiebenz.com > >> > >> To search list archives http://www.okiebenz.com/archive/ > >> > >> To Unsubscribe or change delivery options go to: > >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > >> > >> > > > > > > ___ > > http://www.okiebenz.com > > > > To search list archives http://www.okiebenz.com/archive/ > > > > To Unsubscribe or change delivery options go to: > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > -- Jaime Kopchinski http://www.jaimekop.com/ ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 124 rear suspension part numbers
Thanks Dan, good to know. Was easy to do without the tool when it was a swap. Max Dillon Charleston SC Mon Nov 04 09:51:34 EST 2019 Dan--- via Mercedes : > Max, > > The front mount(s) on your W124 differential have been replaced. Did not do > the rears as I was waiting to borrow the tool from someone. > > -D > > >> On Nov 4, 2019, at 9:43 AM, Curley McLain via Mercedes >> wrote: >> >> I have not inspected this one yet, but I have never seen the front fail. >> Always been able to reuse them. MB is quite proud of em. $50 each! crockauto >> only has uro for $5 each. I think I will stick with the originals, and >> replace the rear donut bushings. THose are generally no longer concentric >> after 25+ years. >> >> >> Meade Dillon via Mercedes wrote on 11/4/19 7:27 AM: >> >>> Curley - note that the front differential mount requires two of that part >>> number (I think), it is not a kit that has all you need. Found out the >>> hard way when I swapped in the differential from Wilton's sedan into my >>> wagon. >>> - >>> Max >>> Charleston SC >>> >>> >>> >> >> >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> >> > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 124 rear suspension part numbers
No prob. Many Thanks for the numbers! Dan--- via Mercedes wrote on 11/4/19 8:58 AM: Sorry for any confusion -D ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 124 rear suspension part numbers
Sorry for any confusion -D > On Nov 4, 2019, at 9:53 AM, Curley McLain via Mercedes > wrote: > > Thanks for that link to the link kit. I was thinking I'd order the links and > most of the rest of the stuff from MB. (Except the stuff like the front diff > mount that they have priced at an outrageous level.) > Last night I checked out MB Phoenix website, crockauto and a place in yurp. > Will check FCP and some others. > > BTW, the toe links are available several places now, including MB. Its > probably a new number so the old number comes up NLA. MB is not always > infallible when it comes to noting the new part # with one is superceded. > several of the link numbes shown on the MB phoenix website, when I checked on > the yurp site were superceded 3-8 times. I probably should have noted the > new numbers. However 2 of the links there came up as NLA, which I know is > wrong. The new numbers were just not linked to the old. > > Yeah, I thought Dan meant a kit for the links too. Until he clarified... > > > Karl Wittnebel via Mercedes wrote on 11/4/19 7:44 AM: >> Oh I see. I thought you meant MB offers a kit for all the arms. Thanks. >> >> I just did this rear suspension job with all mb stuff. Spring compressor >> never showed up but didnt need it in the end. >> >> The rear subframe mounts are a 202 part now, which doesnt use the old >> hardware. You need new little plates. The bolts are about the same length >> but everyone says to buy new ones which are m14 etorx. So be sure to have >> some etorx sockets on hand. That comes as a separate kit. >> >> I think this lemfoerder arm kit is quite a bit cheaper than MB: >> https://www.fcpeuro.com/products/mercedes-control-arm-kit-rear-with-hardware-e320-cl430-oem-w124rskit?ads_cmpid=6946000685&ads_adid=80629812860&ads_matchtype=&ads_network=u&ads_creative=389889586254&utm_term=&ads_targetid=pla-312297131026&utm_campaign=&utm_source=adwords&utm_medium=ppc&ttv=2&gclid=Cj0KCQiAtf_tBRDtARIsAIbAKe3dx4Xegq9jk3oY0F74_2YRgHdkJQJLBn7dq0mn9bBCUjjKTCBsL6AaAtfOEALw_wcB >> >> The original lemfoerder kit is available here from the UK on Amazon for >> much less though; it lists it as a w202 part but I think it is the same. >> Lots of guys in the UK seem to have used it on 124 cars: >> >> https://www.amazon.com/Lemforder-3350001-Suspension-Link-Stabiliser/dp/B00CQ6QEV0 >> >> >> > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 124 rear suspension part numbers
Thanks for that link to the link kit. I was thinking I'd order the links and most of the rest of the stuff from MB. (Except the stuff like the front diff mount that they have priced at an outrageous level.) Last night I checked out MB Phoenix website, crockauto and a place in yurp. Will check FCP and some others. BTW, the toe links are available several places now, including MB. Its probably a new number so the old number comes up NLA. MB is not always infallible when it comes to noting the new part # with one is superceded. several of the link numbes shown on the MB phoenix website, when I checked on the yurp site were superceded 3-8 times. I probably should have noted the new numbers. However 2 of the links there came up as NLA, which I know is wrong. The new numbers were just not linked to the old. Yeah, I thought Dan meant a kit for the links too. Until he clarified... Karl Wittnebel via Mercedes wrote on 11/4/19 7:44 AM: Oh I see. I thought you meant MB offers a kit for all the arms. Thanks. I just did this rear suspension job with all mb stuff. Spring compressor never showed up but didnt need it in the end. The rear subframe mounts are a 202 part now, which doesnt use the old hardware. You need new little plates. The bolts are about the same length but everyone says to buy new ones which are m14 etorx. So be sure to have some etorx sockets on hand. That comes as a separate kit. I think this lemfoerder arm kit is quite a bit cheaper than MB: https://www.fcpeuro.com/products/mercedes-control-arm-kit-rear-with-hardware-e320-cl430-oem-w124rskit?ads_cmpid=6946000685&ads_adid=80629812860&ads_matchtype=&ads_network=u&ads_creative=389889586254&utm_term=&ads_targetid=pla-312297131026&utm_campaign=&utm_source=adwords&utm_medium=ppc&ttv=2&gclid=Cj0KCQiAtf_tBRDtARIsAIbAKe3dx4Xegq9jk3oY0F74_2YRgHdkJQJLBn7dq0mn9bBCUjjKTCBsL6AaAtfOEALw_wcB The original lemfoerder kit is available here from the UK on Amazon for much less though; it lists it as a w202 part but I think it is the same. Lots of guys in the UK seem to have used it on 124 cars: https://www.amazon.com/Lemforder-3350001-Suspension-Link-Stabiliser/dp/B00CQ6QEV0 ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 124 rear suspension part numbers
Max, The front mount(s) on your W124 differential have been replaced. Did not do the rears as I was waiting to borrow the tool from someone. -D > On Nov 4, 2019, at 9:43 AM, Curley McLain via Mercedes > wrote: > > I have not inspected this one yet, but I have never seen the front fail. > Always been able to reuse them. MB is quite proud of em. $50 each! > crockauto only has uro for $5 each. I think I will stick with the originals, > and replace the rear donut bushings. THose are generally no longer > concentric after 25+ years. > > > Meade Dillon via Mercedes wrote on 11/4/19 7:27 AM: >> Curley - note that the front differential mount requires two of that part >> number (I think), it is not a kit that has all you need. Found out the >> hard way when I swapped in the differential from Wilton's sedan into my >> wagon. >> - >> Max >> Charleston SC >> >> > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 124 rear suspension part numbers
I have not inspected this one yet, but I have never seen the front fail. Always been able to reuse them. MB is quite proud of em. $50 each! crockauto only has uro for $5 each. I think I will stick with the originals, and replace the rear donut bushings. THose are generally no longer concentric after 25+ years. Meade Dillon via Mercedes wrote on 11/4/19 7:27 AM: Curley - note that the front differential mount requires two of that part number (I think), it is not a kit that has all you need. Found out the hard way when I swapped in the differential from Wilton's sedan into my wagon. - Max Charleston SC ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 124 rear suspension part numbers
Oh I see. I thought you meant MB offers a kit for all the arms. Thanks. I just did this rear suspension job with all mb stuff. Spring compressor never showed up but didnt need it in the end. The rear subframe mounts are a 202 part now, which doesnt use the old hardware. You need new little plates. The bolts are about the same length but everyone says to buy new ones which are m14 etorx. So be sure to have some etorx sockets on hand. That comes as a separate kit. I think this lemfoerder arm kit is quite a bit cheaper than MB: https://www.fcpeuro.com/products/mercedes-control-arm-kit-rear-with-hardware-e320-cl430-oem-w124rskit?ads_cmpid=6946000685&ads_adid=80629812860&ads_matchtype=&ads_network=u&ads_creative=389889586254&utm_term=&ads_targetid=pla-312297131026&utm_campaign=&utm_source=adwords&utm_medium=ppc&ttv=2&gclid=Cj0KCQiAtf_tBRDtARIsAIbAKe3dx4Xegq9jk3oY0F74_2YRgHdkJQJLBn7dq0mn9bBCUjjKTCBsL6AaAtfOEALw_wcB The original lemfoerder kit is available here from the UK on Amazon for much less though; it lists it as a w202 part but I think it is the same. Lots of guys in the UK seem to have used it on 124 cars: https://www.amazon.com/Lemforder-3350001-Suspension-Link-Stabiliser/dp/B00CQ6QEV0 On Mon, Nov 4, 2019, 5:14 AM Dan--- via Mercedes wrote: > The wheel carrier bushing, the “220” number, is the one that's the kit. > > -D > > > On Nov 4, 2019, at 8:04 AM, Karl Wittnebel via Mercedes < > mercedes@okiebenz.com> wrote: > > > > Is there an actual part number for a kit from mercedes Dan? The > adjustable > > toe links are nla I think, as well as the front diff mount. Those carrier > > bearings are spherical and over 100 apiece from MB; not sure what they > run > > aftermarket but it might be a place to save a little cash. > > > > On Mon, Nov 4, 2019, 4:58 AM Dan--- via Mercedes > > wrote: > > > >> The kit is what Mercedes provides as well, it’s not just the bushing. > >> > >> -D > >> > >>> On Nov 4, 2019, at 7:54 AM, Karl Wittnebel via Mercedes < > >> mercedes@okiebenz.com> wrote: > >>> > >>> Lemfoerder makes a kit with all of it except maybe lower control arms. > >> Not > >>> sure if the carrier bearings are included, but they also make those. > Nice > >>> thing is the kit usually comes with new hardware. FCP euro also has a > kit > >>> but I dont know what brand. > >>> > >>> I think I have a set of diff mounts in a box that I will never use if > you > >>> want them just let me know I will delmi them for less than what I paid. > >>> > >>> On Sun, Nov 3, 2019, 8:17 PM Dan Penoff via Mercedes < > >> mercedes@okiebenz.com> > >>> wrote: > >>> > Looks like the bushing that is in the wheel carrier is a 220 352 02 27 > "supporting joint”. > > The front differential mount is a 124 351 13 42 “rubber mounting” > > The two rear or cylindrical differential mounts are a 124 352 77 65 > “mount, axle subframe". > > I show that Lemförder still makes all of these parts, but they also > are > available from Mercedes for nearly the same price. > > -D > > > > > On Nov 3, 2019, at 10:05 PM, Curley McLain via Mercedes < > mercedes@okiebenz.com> wrote: > > > > I am putting together a list of part numbers for 124 rear suspension > parts so I can compare prices form various sources. I can't find a > >> couple > things in the MB Stealer diagrams/lists. > > > > Does anyone have part numbers for: > > > > 1. Diff Mount bushings (2 at the rear of the diff) > > 2. LCA outer bushings (in the wheel carrier) > > > > Thanks! > > > > When it is complete, I will send a copy to anyone interested and/or > the > list. > > > > > > ___ > > http://www.okiebenz.com > > > > To search list archives http://www.okiebenz.com/archive/ > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > On Mon, Nov 4, 2019, 5:14 AM Dan--- via Mercedes wrote: > The wheel carrier bushing, the “220” number, is the one that's the kit. > > -D > > > On Nov 4, 2019, at 8:04 AM, Karl Wittnebel via Mercedes < > mercedes@okiebenz.com> wrote: > > > > Is there an actual part number for a kit from mercedes Dan? The > adjustable > > toe links are nla I think, as well as the front diff mount. Those carrier > > bearings are spherical and over 100 apiece from MB; not sure what they > run > > aftermarket but it might be a place to save a little cash. > > > > On Mon, Nov 4, 2019, 4:58 AM Dan--- via Mercedes > > wrote: > > > >> The kit is what Mercedes provides as well, it’s not just the bushing. > >> > >> -D > >> > >>> On Nov 4, 2019, at 7:54 AM, Karl Wittnebel via Mercedes < > >> mercedes@okiebenz.com> wrote: > >>> > >>> Lemfoerder makes a kit with all of it except maybe lower c
Re: [MBZ] 124 rear suspension part numbers
Curley - note that the front differential mount requires two of that part number (I think), it is not a kit that has all you need. Found out the hard way when I swapped in the differential from Wilton's sedan into my wagon. - Max Charleston SC On Sun, Nov 3, 2019 at 11:17 PM Dan Penoff via Mercedes < mercedes@okiebenz.com> wrote: > > The front differential mount is a 124 351 13 42 “rubber mounting” > > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 124 rear suspension part numbers
The wheel carrier bushing, the “220” number, is the one that's the kit. -D > On Nov 4, 2019, at 8:04 AM, Karl Wittnebel via Mercedes > wrote: > > Is there an actual part number for a kit from mercedes Dan? The adjustable > toe links are nla I think, as well as the front diff mount. Those carrier > bearings are spherical and over 100 apiece from MB; not sure what they run > aftermarket but it might be a place to save a little cash. > > On Mon, Nov 4, 2019, 4:58 AM Dan--- via Mercedes > wrote: > >> The kit is what Mercedes provides as well, it’s not just the bushing. >> >> -D >> >>> On Nov 4, 2019, at 7:54 AM, Karl Wittnebel via Mercedes < >> mercedes@okiebenz.com> wrote: >>> >>> Lemfoerder makes a kit with all of it except maybe lower control arms. >> Not >>> sure if the carrier bearings are included, but they also make those. Nice >>> thing is the kit usually comes with new hardware. FCP euro also has a kit >>> but I dont know what brand. >>> >>> I think I have a set of diff mounts in a box that I will never use if you >>> want them just let me know I will delmi them for less than what I paid. >>> >>> On Sun, Nov 3, 2019, 8:17 PM Dan Penoff via Mercedes < >> mercedes@okiebenz.com> >>> wrote: >>> Looks like the bushing that is in the wheel carrier is a 220 352 02 27 "supporting joint”. The front differential mount is a 124 351 13 42 “rubber mounting” The two rear or cylindrical differential mounts are a 124 352 77 65 “mount, axle subframe". I show that Lemförder still makes all of these parts, but they also are available from Mercedes for nearly the same price. -D > On Nov 3, 2019, at 10:05 PM, Curley McLain via Mercedes < mercedes@okiebenz.com> wrote: > > I am putting together a list of part numbers for 124 rear suspension parts so I can compare prices form various sources. I can't find a >> couple things in the MB Stealer diagrams/lists. > > Does anyone have part numbers for: > > 1. Diff Mount bushings (2 at the rear of the diff) > 2. LCA outer bushings (in the wheel carrier) > > Thanks! > > When it is complete, I will send a copy to anyone interested and/or the list. > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 124 rear suspension part numbers
Is there an actual part number for a kit from mercedes Dan? The adjustable toe links are nla I think, as well as the front diff mount. Those carrier bearings are spherical and over 100 apiece from MB; not sure what they run aftermarket but it might be a place to save a little cash. On Mon, Nov 4, 2019, 4:58 AM Dan--- via Mercedes wrote: > The kit is what Mercedes provides as well, it’s not just the bushing. > > -D > > > On Nov 4, 2019, at 7:54 AM, Karl Wittnebel via Mercedes < > mercedes@okiebenz.com> wrote: > > > > Lemfoerder makes a kit with all of it except maybe lower control arms. > Not > > sure if the carrier bearings are included, but they also make those. Nice > > thing is the kit usually comes with new hardware. FCP euro also has a kit > > but I dont know what brand. > > > > I think I have a set of diff mounts in a box that I will never use if you > > want them just let me know I will delmi them for less than what I paid. > > > > On Sun, Nov 3, 2019, 8:17 PM Dan Penoff via Mercedes < > mercedes@okiebenz.com> > > wrote: > > > >> Looks like the bushing that is in the wheel carrier is a 220 352 02 27 > >> "supporting joint”. > >> > >> The front differential mount is a 124 351 13 42 “rubber mounting” > >> > >> The two rear or cylindrical differential mounts are a 124 352 77 65 > >> “mount, axle subframe". > >> > >> I show that Lemförder still makes all of these parts, but they also are > >> available from Mercedes for nearly the same price. > >> > >> -D > >> > >> > >> > >>> On Nov 3, 2019, at 10:05 PM, Curley McLain via Mercedes < > >> mercedes@okiebenz.com> wrote: > >>> > >>> I am putting together a list of part numbers for 124 rear suspension > >> parts so I can compare prices form various sources. I can't find a > couple > >> things in the MB Stealer diagrams/lists. > >>> > >>> Does anyone have part numbers for: > >>> > >>> 1. Diff Mount bushings (2 at the rear of the diff) > >>> 2. LCA outer bushings (in the wheel carrier) > >>> > >>> Thanks! > >>> > >>> When it is complete, I will send a copy to anyone interested and/or the > >> list. > >>> > >>> > >>> ___ > >>> http://www.okiebenz.com > >>> > >>> To search list archives http://www.okiebenz.com/archive/ > >>> > >>> To Unsubscribe or change delivery options go to: > >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > >>> > >> > >> > >> ___ > >> http://www.okiebenz.com > >> > >> To search list archives http://www.okiebenz.com/archive/ > >> > >> To Unsubscribe or change delivery options go to: > >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > >> > >> > > ___ > > http://www.okiebenz.com > > > > To search list archives http://www.okiebenz.com/archive/ > > > > To Unsubscribe or change delivery options go to: > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 124 rear suspension part numbers
The kit is what Mercedes provides as well, it’s not just the bushing. -D > On Nov 4, 2019, at 7:54 AM, Karl Wittnebel via Mercedes > wrote: > > Lemfoerder makes a kit with all of it except maybe lower control arms. Not > sure if the carrier bearings are included, but they also make those. Nice > thing is the kit usually comes with new hardware. FCP euro also has a kit > but I dont know what brand. > > I think I have a set of diff mounts in a box that I will never use if you > want them just let me know I will delmi them for less than what I paid. > > On Sun, Nov 3, 2019, 8:17 PM Dan Penoff via Mercedes > wrote: > >> Looks like the bushing that is in the wheel carrier is a 220 352 02 27 >> "supporting joint”. >> >> The front differential mount is a 124 351 13 42 “rubber mounting” >> >> The two rear or cylindrical differential mounts are a 124 352 77 65 >> “mount, axle subframe". >> >> I show that Lemförder still makes all of these parts, but they also are >> available from Mercedes for nearly the same price. >> >> -D >> >> >> >>> On Nov 3, 2019, at 10:05 PM, Curley McLain via Mercedes < >> mercedes@okiebenz.com> wrote: >>> >>> I am putting together a list of part numbers for 124 rear suspension >> parts so I can compare prices form various sources. I can't find a couple >> things in the MB Stealer diagrams/lists. >>> >>> Does anyone have part numbers for: >>> >>> 1. Diff Mount bushings (2 at the rear of the diff) >>> 2. LCA outer bushings (in the wheel carrier) >>> >>> Thanks! >>> >>> When it is complete, I will send a copy to anyone interested and/or the >> list. >>> >>> >>> ___ >>> http://www.okiebenz.com >>> >>> To search list archives http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >> >> >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> >> > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 124 rear suspension part numbers
Lemfoerder makes a kit with all of it except maybe lower control arms. Not sure if the carrier bearings are included, but they also make those. Nice thing is the kit usually comes with new hardware. FCP euro also has a kit but I dont know what brand. I think I have a set of diff mounts in a box that I will never use if you want them just let me know I will delmi them for less than what I paid. On Sun, Nov 3, 2019, 8:17 PM Dan Penoff via Mercedes wrote: > Looks like the bushing that is in the wheel carrier is a 220 352 02 27 > "supporting joint”. > > The front differential mount is a 124 351 13 42 “rubber mounting” > > The two rear or cylindrical differential mounts are a 124 352 77 65 > “mount, axle subframe". > > I show that Lemförder still makes all of these parts, but they also are > available from Mercedes for nearly the same price. > > -D > > > > > On Nov 3, 2019, at 10:05 PM, Curley McLain via Mercedes < > mercedes@okiebenz.com> wrote: > > > > I am putting together a list of part numbers for 124 rear suspension > parts so I can compare prices form various sources. I can't find a couple > things in the MB Stealer diagrams/lists. > > > > Does anyone have part numbers for: > > > > 1. Diff Mount bushings (2 at the rear of the diff) > > 2. LCA outer bushings (in the wheel carrier) > > > > Thanks! > > > > When it is complete, I will send a copy to anyone interested and/or the > list. > > > > > > ___ > > http://www.okiebenz.com > > > > To search list archives http://www.okiebenz.com/archive/ > > > > To Unsubscribe or change delivery options go to: > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 124 rear suspension part numbers
Looks like the bushing that is in the wheel carrier is a 220 352 02 27 "supporting joint”. The front differential mount is a 124 351 13 42 “rubber mounting” The two rear or cylindrical differential mounts are a 124 352 77 65 “mount, axle subframe". I show that Lemförder still makes all of these parts, but they also are available from Mercedes for nearly the same price. -D > On Nov 3, 2019, at 10:05 PM, Curley McLain via Mercedes > wrote: > > I am putting together a list of part numbers for 124 rear suspension parts so > I can compare prices form various sources. I can't find a couple things in > the MB Stealer diagrams/lists. > > Does anyone have part numbers for: > > 1. Diff Mount bushings (2 at the rear of the diff) > 2. LCA outer bushings (in the wheel carrier) > > Thanks! > > When it is complete, I will send a copy to anyone interested and/or the list. > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 124 rear suspension part numbers
124.133 or 124.128 In this case, it will be a 124.128, but I think they are all the same. 300D or 300D 2.5 Dan Penoff via Mercedes wrote on 11/3/19 9:19 PM: VIN or a chassis number (124.xxx) and I can come up with them in a heartbeat. -D On Nov 3, 2019, at 10:05 PM, Curley McLain via Mercedes wrote: I am putting together a list of part numbers for 124 rear suspension parts so I can compare prices form various sources. I can't find a couple things in the MB Stealer diagrams/lists. Does anyone have part numbers for: 1. Diff Mount bushings (2 at the rear of the diff) 2. LCA outer bushings (in the wheel carrier) Thanks! When it is complete, I will send a copy to anyone interested and/or the list. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] 124 rear suspension part numbers
VIN or a chassis number (124.xxx) and I can come up with them in a heartbeat. -D > On Nov 3, 2019, at 10:05 PM, Curley McLain via Mercedes > wrote: > > I am putting together a list of part numbers for 124 rear suspension parts so > I can compare prices form various sources. I can't find a couple things in > the MB Stealer diagrams/lists. > > Does anyone have part numbers for: > > 1. Diff Mount bushings (2 at the rear of the diff) > 2. LCA outer bushings (in the wheel carrier) > > Thanks! > > When it is complete, I will send a copy to anyone interested and/or the list. > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] 124 rear suspension part numbers
I am putting together a list of part numbers for 124 rear suspension parts so I can compare prices form various sources. I can't find a couple things in the MB Stealer diagrams/lists. Does anyone have part numbers for: 1. Diff Mount bushings (2 at the rear of the diff) 2. LCA outer bushings (in the wheel carrier) Thanks! When it is complete, I will send a copy to anyone interested and/or the list. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
