Apparently, MB has forgotten that the 1968 250S 280S were delivered
with an added air pump which interferes with their replacement pump.
Wasn't there a right-angle transmission dingus involved?
I seem to recall running across a couple of different
fuel pump designs for our M130 250C.
-- Jim
I just picked up some reman calipers from these clowns. They are missing the
heat shield around the seal. Is this really necessary? They had no clue of
course.
I can pry off the old ones and install on the remans but the old ones are badly
corroded and will likely not transfer well.
Sent from
i know a guy who sells quality USA reman calipers (and new ones too!) and
i don't recall such problems
On Fri, Aug 9, 2013 at 1:47 PM, dsereta...@yahoo.com wrote:
I just picked up some reman calipers from these clowns. They are missing
the heat shield around the seal. Is this really
I know that guy too! I was unable to reach you and was in a hurry to get those
parts. You called me the other day. I tried to call you back but your number
was not reachable because it was a Skype number or something.
Sent from my iPhone
On Aug 9, 2013, at 2:30 PM, Gary Hurst
954 889 5530. email is even better.
big hurry never works out
On Fri, Aug 9, 2013 at 2:46 PM, dsereta...@yahoo.com wrote:
I know that guy too! I was unable to reach you and was in a hurry to get
those parts. You called me the other day. I tried to call you back but your
number was not
How would someone get core calipers back to the guy?
--R
On 8/9/13 2:30 PM, Gary Hurst wrote:
i know a guy who sells quality USA reman calipers (and new ones too!) and
i don't recall such problems
On Fri, Aug 9, 2013 at 1:47 PM, dsereta...@yahoo.com wrote:
I just picked up some reman
I'll try that number next time. I called you back at this number which was
reflected in my caller ID:
(661) 748-0240
Palmdale Area
I'm not a big fan of email for ordering parts. I hope you understand.
BTW how knowledgable are you with regard to BMW 2002 parts. It's a 1973. Are
you competitive
That's a good point. I ordered my last alternator from the autozone idiots
because I couldn't be bothered mailing back the core to Rusty.
Sent from my iPhone
On Aug 9, 2013, at 2:52 PM, Rich Thomas richthomas79td...@constructivity.net
wrote:
How would someone get core calipers back to the
i'm generally not that competitive with autohaus as i can't really sell you
OEM part for the same money that they sell generic dismal chinese parts.
where items are identical, i will normally sell them at az+10%.
i don't sell a lot of parts for 2002s
On Fri, Aug 9, 2013 at 2:54 PM,
one would generally contact the guy with what cores are to be returned and
then await instructions where to send them
On Fri, Aug 9, 2013 at 2:52 PM, Rich Thomas
richthomas79td...@constructivity.net wrote:
How would someone get core calipers back to the guy?
--R
On 8/9/13 2:30 PM, Gary
Except that the people who answer the phones are rude and lacking in knowledge.
I have very little desire to order from them. Much rather speak with an expert
(Gary) get quality parts and pay 10% more for equivalent.
Sent from my iPhone
On Aug 9, 2013, at 3:21 PM, Kaleb C. Striplin
Az + 10% is fine. Thanks Gary.
Sent from my iPhone
On Aug 9, 2013, at 3:19 PM, Gary Hurst jabbahur...@gmail.com wrote:
i'm generally not that competitive with autohaus as i can't really sell you
OEM part for the same money that they sell generic dismal chinese parts.
where items are
i'd be saying that to if i were used to dealing with some other guy who
sent you that same chinese autohaus stuff for 3 times the price instead of
dealimg with me
On Fri, Aug 9, 2013 at 3:21 PM, Kaleb C. Striplin ka...@striplin.netwrote:
Autohausaz rocks
Sent from my iPhone
On Aug 9, 2013,
Trent is the best. Speaking of Trent, if Trent is Q2 or Q jr, what does that
make jabba?
Sent from my iPhone
On Aug 9, 2013, at 2:25 PM, dsereta...@yahoo.com wrote:
Except that the people who answer the phones are rude and lacking in
knowledge. I have very little desire to order from them.
fat?
On Fri, Aug 9, 2013 at 3:27 PM, Kaleb C. Striplin ka...@striplin.netwrote:
Trent is the best. Speaking of Trent, if Trent is Q2 or Q jr, what does
that make jabba?
Sent from my iPhone
On Aug 9, 2013, at 2:25 PM, dsereta...@yahoo.com wrote:
Except that the people who answer the
on identical items. a lot of the big savings from AZ comes from them just
being a huge walmart type outfit but a lot also comes from comparing apples
to oranges. they sell a lot of substandard stuff that i don't sell
On Fri, Aug 9, 2013 at 3:26 PM, dsereta...@yahoo.com wrote:
Az + 10% is
I has enough of that other guy for a while. Once got a uro flex disk, was
assured it was good quality. Spent hours trying to put the damn thing on and it
simply would not go, holes were off just a hair. Also once got a set of uro
ball joints, would not fit in the steering knuckle, ruined a
Autohausaz rocks
Sent from my iPhone
On Aug 9, 2013, at 2:19 PM, Gary Hurst jabbahur...@gmail.com wrote:
i'm generally not that competitive with autohaus as i can't really sell you
OEM part for the same money that they sell generic dismal chinese parts.
where items are identical, i will
so why do you guys worship a guy who does this to you for years and then
tops it off by telling you to give all your money to trent without
receiving any parts at all, let alone the dismal chinese crap he
specialized in, to support something he called learning.? it's an
awfully strange world, is
Trent is the best. Speaking of Trent, if Trent is Q2 or Q jr, what
does that make jabba?
Sent from my iPhone
Minnesota fats
Or should that be minnesota skinny?
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To
Ditto!
I am restoring a 1968 250S, and was in desperate need of an old style rocker
arm fuel pump. Gary 1) knew what I was talking about, 2) found it for me for
at a not too bad of a price, and 3) had it delivered with gaskets on the day
promised.
On Aug 9, 2013, at 3:25 PM,
wow. but surely autohausaz could have done that? and, if not, what about
the mercedes classic center?
On Fri, Aug 9, 2013 at 4:11 PM, Jon Agne jonag...@gwi.net wrote:
Ditto!
I am restoring a 1968 250S, and was in desperate need of an old style
rocker arm fuel pump. Gary 1) knew what I
Ah, I am sending back the pump the classic center sent to me as it will not
fit. Apparently, MB has forgotten that the 1968 250S 280S were delivered
with an added air pump which interferes with their replacement pump. Just
sayin.
On Aug 9, 2013, at 4:14 PM, Gary Hurst wrote:
wow.
Well, Q2 didn't work out very well; meanwhile, it's Gary, and we'll see
how it goes from there.
Wilton
- Original Message -
From: Dieselhead 126die...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Friday, August 09, 2013 4:01 PM
Subject: Re: [MBZ] Autozone idiots
wow. MB doesn't know what pump you take but i do. that's pretty
impressive!
On Fri, Aug 9, 2013 at 4:23 PM, Jon Agne jonag...@gwi.net wrote:
Ah, I am sending back the pump the classic center sent to me as it will
not fit. Apparently, MB has forgotten that the 1968 250S 280S were
On Aug 9, 2013, at 2:43 PM, Gary Hurst jabbahur...@gmail.com wrote:
so why do you guys worship a guy who does this to you for years and then
tops it off by telling you to give all your money to trent without
receiving any parts at all, let alone the dismal chinese crap he
specialized in, to
Yeah, I think we can leave references to others out
On Fri, Aug 9, 2013 at 5:03 PM, Rick Knoble rickkno...@hotmail.com wrote:
On Aug 9, 2013, at 2:43 PM, Gary Hurst jabbahur...@gmail.com wrote:
so why do you guys worship a guy who does this to you for years and then
tops it off by
27 matches
Mail list logo
