Re: [MBZ] OT even further than usual - IPAQ 5455
On May 12, 2006, at 12:43 PM, BillR wrote: I will apologize in advance for being even more off topic than usual, but I know of no other knowledge base broad enough to probably have an answer for me. I have had my constant companion IPAQ 5455 drop out of my pocket a few times and now the screen alignment is so far off it is not correctable, making the machine unable to do many of the more interesting things I used to do on it. It is sitting unused on my desk. Still connects to the PC and downloads fine. It does most of what it should but needs help. Does anyone do repairs on such things or know of a reliable source of repairs? I've not tried breaking into the thing as my electronics repair abilities seemed to max out prior to chips and printed circuits. Fun to take things apart but if it is not a loose wire I'm out of luck. Not too many tubes in this one. TIA. BillR Send it to the manufacturer with a note similar to what you posted here. In many cases they replace major components and when necessary, the entire device. I've known some manufacturers (hp for one) to have a set and rather low repair fee and they ship you a refurbished unit regardless of whatever is wrong with yours. Johnny B. I Mac Therefore I am
Re: [MBZ] OT even further than usual - IPAQ 5455
That was one of the first tries. I have been a bit obsessive about it at times and tried the procedure up to 50+ times in hopes that it was making some difference. Machine finally just resets and goes on as before. When it started acting up I was able to compensate by doing a purposeful misalignment about 1/4" low and left. That let me run the needed programs. Soon that quit working - and it also made some of the other programs not function correctly. I even worked with one of the software makers and they gave up with trying to get their software to work and refunded my money [BTW - that was Monopoly - a great and fairly fast game on a handheld]. Thanks for the suggestion. BillR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Richard Hattaway Sent: Friday, May 12, 2006 4:53 PM To: Mercedes Discussion List Subject: Re: [MBZ] OT even further than usual - IPAQ 5455 Bill, There is an alignment procedure on my Ipaq. I presume you *have* done that? If not, then that's the first place to go. Richard Trying not to suggest stuff you did yesterday (c: __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] OT even further than usual - IPAQ 5455
Bill, There is an alignment procedure on my Ipaq. I presume you *have* done that? If not, then that's the first place to go. Richard Trying not to suggest stuff you did yesterday (c: __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Re: [MBZ] OT even further than usual - IPAQ 5455
Don't know yet - have been reluctant to open it up, but see little choice as it is not at all useful at the moment. I'll let you folks know what I find. BillR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of R A Bennell Sent: Friday, May 12, 2006 3:38 PM To: Mercedes Discussion List Subject: Re: [MBZ] OT even further than usual - IPAQ 5455 Any chance that there are some kind of adjustment screws or whatever inside? I'm thinking like a computer monitor where one is able to move the screen side to side etc by pushing buttons. Randy B -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of BillR Sent: Friday, May 12, 2006 12:31 PM To: 'Mercedes Discussion List' Subject: Re: [MBZ] OT even further than usual - IPAQ 5455 Odd thing this. Physically it seems fine, and the screen is where it should be, but it just will not align properly and always fails that part of the self test. Some programs with options across the top cannot be accessed; often you need to press outside of whatever spot you are supposed to press to get a result. Some other Items seem to work just as they should. I think it is electronic - have even resorted to a couple of firm taps from the opposite direction of the way it smacked into the cement with no result I could see. The cost thing is something I fear is true, that to replace would be cheaper than repair. It does me no good as is, so am willing to entrust it to someone with some interest or experience with these things. BillR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Thomas Sent: Friday, May 12, 2006 1:18 PM To: Mercedes Discussion List Subject: Re: [MBZ] OT even further than usual - IPAQ 5455 Do you mean the screen is physically out of whack or electronically? If it is just twisted in the case (not sure how that could be) then sounds like you just need to open it up and realign it. If it is the screen image then I am not sure how that could be fixed (unless you whack it again) -- might need some major parts transplant, which would probably cost more than a new/used one. --R BillR wrote: >I will apologize in advance for being even more off topic than usual, >but I know of no other knowledge base broad enough to probably have an >answer for me. I have had my constant companion IPAQ 5455 drop out of >my pocket a few times and now the screen alignment is so far off it is >not correctable, making the machine unable to do many of the more >interesting things I used to do on it. It is sitting unused on my >desk. Still connects to the PC and downloads fine. It does most of >what it should but needs help. Does anyone do repairs on such things >or know of a reliable source of repairs? I've not tried breaking into >the thing as my electronics repair abilities seemed to max out prior to >chips and printed circuits. Fun to take things apart but if it is not >a loose wire I'm out of luck. Not too many tubes in this one. >TIA. >BillR >Jacksonville FL >1981 300SD'EM' 275K >Ipaq 5455 with bad alignment >[EMAIL PROTECTED] for off list contact > > >___ >http://www.striplin.net >For new parts see official list sponsor: http://www.buymbparts.com/ For >used parts email [EMAIL PROTECTED] > >To Unsubscribe or change delivery options go to: >http://striplin.net/mailman/listinfo/mercedes_striplin.net > > > > ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] OT even further than usual - IPAQ 5455
Any chance that there are some kind of adjustment screws or whatever inside? I'm thinking like a computer monitor where one is able to move the screen side to side etc by pushing buttons. Randy B -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of BillR Sent: Friday, May 12, 2006 12:31 PM To: 'Mercedes Discussion List' Subject: Re: [MBZ] OT even further than usual - IPAQ 5455 Odd thing this. Physically it seems fine, and the screen is where it should be, but it just will not align properly and always fails that part of the self test. Some programs with options across the top cannot be accessed; often you need to press outside of whatever spot you are supposed to press to get a result. Some other Items seem to work just as they should. I think it is electronic - have even resorted to a couple of firm taps from the opposite direction of the way it smacked into the cement with no result I could see. The cost thing is something I fear is true, that to replace would be cheaper than repair. It does me no good as is, so am willing to entrust it to someone with some interest or experience with these things. BillR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Thomas Sent: Friday, May 12, 2006 1:18 PM To: Mercedes Discussion List Subject: Re: [MBZ] OT even further than usual - IPAQ 5455 Do you mean the screen is physically out of whack or electronically? If it is just twisted in the case (not sure how that could be) then sounds like you just need to open it up and realign it. If it is the screen image then I am not sure how that could be fixed (unless you whack it again) -- might need some major parts transplant, which would probably cost more than a new/used one. --R BillR wrote: >I will apologize in advance for being even more off topic than usual, >but I know of no other knowledge base broad enough to probably have an >answer for me. I have had my constant companion IPAQ 5455 drop out of >my pocket a few times and now the screen alignment is so far off it is >not correctable, making the machine unable to do many of the more >interesting things I used to do on it. It is sitting unused on my >desk. Still connects to the PC and downloads fine. It does most of >what it should but needs help. Does anyone do repairs on such things >or know of a reliable source of repairs? I've not tried breaking into >the thing as my electronics repair abilities seemed to max out prior to >chips and printed circuits. Fun to take things apart but if it is not a loose wire I'm out of luck. Not too many tubes in this one. >TIA. >BillR >Jacksonville FL >1981 300SD'EM' 275K >Ipaq 5455 with bad alignment >[EMAIL PROTECTED] for off list contact > > >___ >http://www.striplin.net >For new parts see official list sponsor: http://www.buymbparts.com/ For >used parts email [EMAIL PROTECTED] > >To Unsubscribe or change delivery options go to: >http://striplin.net/mailman/listinfo/mercedes_striplin.net > > > > ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] OT even further than usual - IPAQ 5455
Pretty much what I feared. I was shocked some years ago when the standard repair on my Commodore 64 was to junk the insides and reuse the case. Repair work isn't what it used to be. I'll open it up as I do have nothing to lose. But not today. That, of course, is pretty much the modern mantra of repair, except for truly expensive (read: military/industrial) items. That is not to say, however, that the accomplished and brave DIY cannot fix them, but it's not cost-effective when you're paying scale for labor. -- Jim
Re: [MBZ] OT even further than usual - IPAQ 5455
Pretty much what I feared. I was shocked some years ago when the standard repair on my Commodore 64 was to junk the insides and reuse the case. Repair work isn't what it used to be. I'll open it up as I do have nothing to lose. But not today. BillR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Ervine Sent: Friday, May 12, 2006 2:28 PM To: Mercedes Discussion List Subject: Re: [MBZ] OT even further than usual - IPAQ 5455 BillR wrote: > Sounds like you might be thinking the repair is moving back into my > area of experience. I will get brave tomorrow and crack the case. Bill, There are no user serviceable parts inside your iPAQ, nor are there any field replaceable units contained therein. Repair of an iPAQ is replacement of the device. Not to say that you won't have any luck once you get in there, because I simply don't know. All I know is that there aren't any internal spare parts listed - whole unit replacement only. -- John L. Ervine 1981 240D 4-spd 270+kmi 1980 300TD 175+kmi 1980 300SD 277+kmi 1977 280S 4-spd 81+kmi 1976 350SE 4-spd 163+kmi ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] OT even further than usual - IPAQ 5455
Done several soft and a few hard resets [quite a pain]. No change in the action. BillR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of kayoooh @ gmail Sent: Friday, May 12, 2006 2:23 PM To: [EMAIL PROTECTED] Subject: Re: [MBZ] OT even further than usual - IPAQ 5455 Did you try a soft reset!? You'll lose any data not in ROM but at this point you have very little choice, I am afraid. Good luck, Omar. > > > Date: Fri, 12 May 2006 13:31:15 -0400 From: "BillR" <[EMAIL PROTECTED]> Subject: Re: [MBZ] OT even further than usual - IPAQ 5455 Odd thing this. Physically it seems fine, and the screen is where it should be, but it just will not align properly and always fails that part of the self test. Some programs with options across the top cannot be accessed; often you need to press outside of whatever spot you are supposed to press to get a result. Some other Items seem to work just as they should. I think it is electronic - have even resorted to a couple of firm taps from the opposite direction of the way it smacked into the cement with no result I could see. The cost thing is something I fear is true, that to replace would be cheaper than repair. It does me no good as is, so am willing to entrust it to someone with some interest or experience with these things. BillR ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] OT even further than usual - IPAQ 5455
BillR wrote: Sounds like you might be thinking the repair is moving back into my area of experience. I will get brave tomorrow and crack the case. Bill, There are no user serviceable parts inside your iPAQ, nor are there any field replaceable units contained therein. Repair of an iPAQ is replacement of the device. Not to say that you won't have any luck once you get in there, because I simply don't know. All I know is that there aren't any internal spare parts listed - whole unit replacement only. -- John L. Ervine 1981 240D 4-spd 270+kmi 1980 300TD 175+kmi 1980 300SD 277+kmi 1977 280S 4-spd 81+kmi 1976 350SE 4-spd 163+kmi
Re: [MBZ] OT even further than usual - IPAQ 5455
Did you try a soft reset!? You'll lose any data not in ROM but at this point you have very little choice, I am afraid. Good luck, Omar. > > > Date: Fri, 12 May 2006 13:31:15 -0400 From: "BillR" <[EMAIL PROTECTED]> Subject: Re: [MBZ] OT even further than usual - IPAQ 5455 Odd thing this. Physically it seems fine, and the screen is where it should be, but it just will not align properly and always fails that part of the self test. Some programs with options across the top cannot be accessed; often you need to press outside of whatever spot you are supposed to press to get a result. Some other Items seem to work just as they should. I think it is electronic - have even resorted to a couple of firm taps from the opposite direction of the way it smacked into the cement with no result I could see. The cost thing is something I fear is true, that to replace would be cheaper than repair. It does me no good as is, so am willing to entrust it to someone with some interest or experience with these things. BillR
Re: [MBZ] OT even further than usual - IPAQ 5455
Sounds like you might be thinking the repair is moving back into my area of experience. I will get brave tomorrow and crack the case. Thanks - BillR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Thomas Sent: Friday, May 12, 2006 1:35 PM To: Mercedes Discussion List Subject: Re: [MBZ] OT even further than usual - IPAQ 5455 Ah, I think these touch screens have a touch sensitive layer on top of the actual display, some kind of plastic with very thin wires in it or something like that, or maybe some kind of sensors along the edge. Maybe that part got moved around relative to the actual display. --R BillR wrote: >Odd thing this. Physically it seems fine, and the screen is where it >should be, but it just will not align properly and always fails that >part of the self test. Some programs with options across the top >cannot be accessed; often you need to press outside of whatever spot >you are supposed to press to get a result. Some other Items seem to >work just as they should. I think it is electronic - have even >resorted to a couple of firm taps from the opposite direction of the >way it smacked into the cement with no result I could see. The cost >thing is something I fear is true, that to replace would be cheaper >than repair. It does me no good as is, so am willing to entrust it to someone with some interest or experience with these things. >BillR > >-Original Message- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] >On Behalf Of Rich Thomas >Sent: Friday, May 12, 2006 1:18 PM >To: Mercedes Discussion List >Subject: Re: [MBZ] OT even further than usual - IPAQ 5455 > >Do you mean the screen is physically out of whack or electronically? >If it is just twisted in the case (not sure how that could be) then >sounds like you just need to open it up and realign it. If it is the >screen image then I am not sure how that could be fixed (unless you >whack it >again) -- might need some major parts transplant, which would probably >cost more than a new/used one. > >--R > >BillR wrote: > > > >>I will apologize in advance for being even more off topic than usual, >>but I know of no other knowledge base broad enough to probably have an >>answer for me. I have had my constant companion IPAQ 5455 drop out of >>my pocket a few times and now the screen alignment is so far off it is >>not correctable, making the machine unable to do many of the more >>interesting things I used to do on it. It is sitting unused on my >>desk. Still connects to the PC and downloads fine. It does most of >>what it should but needs help. Does anyone do repairs on such things >>or know of a reliable source of repairs? I've not tried breaking into >>the thing as my electronics repair abilities seemed to max out prior >>to chips and printed circuits. Fun to take things apart but if it is >>not a >> >> >loose wire I'm out of luck. Not too many tubes in this one. > > >>TIA. >>BillR >>Jacksonville FL >>1981 300SD'EM' 275K >>Ipaq 5455 with bad alignment >>[EMAIL PROTECTED] for off list contact >> >> >>___ >>http://www.striplin.net >>For new parts see official list sponsor: http://www.buymbparts.com/ >>For used parts email [EMAIL PROTECTED] >> >>To Unsubscribe or change delivery options go to: >>http://striplin.net/mailman/listinfo/mercedes_striplin.net >> >> >> >> >> >> > > >___ >http://www.striplin.net >For new parts see official list sponsor: http://www.buymbparts.com/ For >used parts email [EMAIL PROTECTED] > >To Unsubscribe or change delivery options go to: >http://striplin.net/mailman/listinfo/mercedes_striplin.net > > >___ >http://www.striplin.net >For new parts see official list sponsor: http://www.buymbparts.com/ For >used parts email [EMAIL PROTECTED] > >To Unsubscribe or change delivery options go to: >http://striplin.net/mailman/listinfo/mercedes_striplin.net > > > > ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] OT even further than usual - IPAQ 5455
Ah, I think these touch screens have a touch sensitive layer on top of the actual display, some kind of plastic with very thin wires in it or something like that, or maybe some kind of sensors along the edge. Maybe that part got moved around relative to the actual display. --R BillR wrote: Odd thing this. Physically it seems fine, and the screen is where it should be, but it just will not align properly and always fails that part of the self test. Some programs with options across the top cannot be accessed; often you need to press outside of whatever spot you are supposed to press to get a result. Some other Items seem to work just as they should. I think it is electronic - have even resorted to a couple of firm taps from the opposite direction of the way it smacked into the cement with no result I could see. The cost thing is something I fear is true, that to replace would be cheaper than repair. It does me no good as is, so am willing to entrust it to someone with some interest or experience with these things. BillR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Thomas Sent: Friday, May 12, 2006 1:18 PM To: Mercedes Discussion List Subject: Re: [MBZ] OT even further than usual - IPAQ 5455 Do you mean the screen is physically out of whack or electronically? If it is just twisted in the case (not sure how that could be) then sounds like you just need to open it up and realign it. If it is the screen image then I am not sure how that could be fixed (unless you whack it again) -- might need some major parts transplant, which would probably cost more than a new/used one. --R BillR wrote: I will apologize in advance for being even more off topic than usual, but I know of no other knowledge base broad enough to probably have an answer for me. I have had my constant companion IPAQ 5455 drop out of my pocket a few times and now the screen alignment is so far off it is not correctable, making the machine unable to do many of the more interesting things I used to do on it. It is sitting unused on my desk. Still connects to the PC and downloads fine. It does most of what it should but needs help. Does anyone do repairs on such things or know of a reliable source of repairs? I've not tried breaking into the thing as my electronics repair abilities seemed to max out prior to chips and printed circuits. Fun to take things apart but if it is not a loose wire I'm out of luck. Not too many tubes in this one. TIA. BillR Jacksonville FL 1981 300SD'EM' 275K Ipaq 5455 with bad alignment [EMAIL PROTECTED] for off list contact ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] OT even further than usual - IPAQ 5455
Odd thing this. Physically it seems fine, and the screen is where it should be, but it just will not align properly and always fails that part of the self test. Some programs with options across the top cannot be accessed; often you need to press outside of whatever spot you are supposed to press to get a result. Some other Items seem to work just as they should. I think it is electronic - have even resorted to a couple of firm taps from the opposite direction of the way it smacked into the cement with no result I could see. The cost thing is something I fear is true, that to replace would be cheaper than repair. It does me no good as is, so am willing to entrust it to someone with some interest or experience with these things. BillR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Thomas Sent: Friday, May 12, 2006 1:18 PM To: Mercedes Discussion List Subject: Re: [MBZ] OT even further than usual - IPAQ 5455 Do you mean the screen is physically out of whack or electronically? If it is just twisted in the case (not sure how that could be) then sounds like you just need to open it up and realign it. If it is the screen image then I am not sure how that could be fixed (unless you whack it again) -- might need some major parts transplant, which would probably cost more than a new/used one. --R BillR wrote: >I will apologize in advance for being even more off topic than usual, >but I know of no other knowledge base broad enough to probably have an >answer for me. I have had my constant companion IPAQ 5455 drop out of >my pocket a few times and now the screen alignment is so far off it is >not correctable, making the machine unable to do many of the more >interesting things I used to do on it. It is sitting unused on my >desk. Still connects to the PC and downloads fine. It does most of >what it should but needs help. Does anyone do repairs on such things >or know of a reliable source of repairs? I've not tried breaking into >the thing as my electronics repair abilities seemed to max out prior to >chips and printed circuits. Fun to take things apart but if it is not a loose wire I'm out of luck. Not too many tubes in this one. >TIA. >BillR >Jacksonville FL >1981 300SD'EM' 275K >Ipaq 5455 with bad alignment >[EMAIL PROTECTED] for off list contact > > >___ >http://www.striplin.net >For new parts see official list sponsor: http://www.buymbparts.com/ For >used parts email [EMAIL PROTECTED] > >To Unsubscribe or change delivery options go to: >http://striplin.net/mailman/listinfo/mercedes_striplin.net > > > > ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
Re: [MBZ] OT even further than usual - IPAQ 5455
Do you mean the screen is physically out of whack or electronically? If it is just twisted in the case (not sure how that could be) then sounds like you just need to open it up and realign it. If it is the screen image then I am not sure how that could be fixed (unless you whack it again) -- might need some major parts transplant, which would probably cost more than a new/used one. --R BillR wrote: I will apologize in advance for being even more off topic than usual, but I know of no other knowledge base broad enough to probably have an answer for me. I have had my constant companion IPAQ 5455 drop out of my pocket a few times and now the screen alignment is so far off it is not correctable, making the machine unable to do many of the more interesting things I used to do on it. It is sitting unused on my desk. Still connects to the PC and downloads fine. It does most of what it should but needs help. Does anyone do repairs on such things or know of a reliable source of repairs? I've not tried breaking into the thing as my electronics repair abilities seemed to max out prior to chips and printed circuits. Fun to take things apart but if it is not a loose wire I'm out of luck. Not too many tubes in this one. TIA. BillR Jacksonville FL 1981 300SD'EM' 275K Ipaq 5455 with bad alignment [EMAIL PROTECTED] for off list contact ___ http://www.striplin.net For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://striplin.net/mailman/listinfo/mercedes_striplin.net
[MBZ] OT even further than usual - IPAQ 5455
I will apologize in advance for being even more off topic than usual, but I know of no other knowledge base broad enough to probably have an answer for me. I have had my constant companion IPAQ 5455 drop out of my pocket a few times and now the screen alignment is so far off it is not correctable, making the machine unable to do many of the more interesting things I used to do on it. It is sitting unused on my desk. Still connects to the PC and downloads fine. It does most of what it should but needs help. Does anyone do repairs on such things or know of a reliable source of repairs? I've not tried breaking into the thing as my electronics repair abilities seemed to max out prior to chips and printed circuits. Fun to take things apart but if it is not a loose wire I'm out of luck. Not too many tubes in this one. TIA. BillR Jacksonville FL 1981 300SD'EM' 275K Ipaq 5455 with bad alignment [EMAIL PROTECTED] for off list contact