I know I have found a few things on older cars that use 13/16, but I
can't remember what they are. I have always carried a 13/16 in my
110/111 tool sets. Not something needed for most usual service.
My guess is that the 20.6mm if the bolt size and the 20.8 is the
wrench size. 0,02 mm is the
cedes Discussion List
Subject: Re: [MBZ] Question re wrench
13/16th is the old standard spark plug size --- IIRCC.
On Mon, Nov 17, 2008 at 8:59 PM, Peter Frederick <[EMAIL PROTECTED]> wrote:
> Very definitely different, as the W108/109/111 was never sold with a diesel
> engine
>
arch in the handle and a size of 20.8mm.
Glow/spark plug wrench. I'm guessing that the 20.8mm rather
than the nominal 13/16" or 20.64mm is to handle tolerances. The
old 13/16" has a +/- figure, maybe the extra 0.16mm was to account
for that. Nothing worse than a wrench that won't quite go on!
13/16th is the old standard spark plug size --- IIRCC.
On Mon, Nov 17, 2008 at 8:59 PM, Peter Frederick <[EMAIL PROTECTED]> wrote:
> Very definitely different, as the W108/109/111 was never sold with a diesel
> engine
>
--
OK Don, KD5NRO
Norman, OK
"There are only three sports: bullfighting,
e has been gone for over
20 years. His widow passed away
this summer and the place was cleared out.
Randy
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Peter Frederick
Sent: Monday, November 17, 2008 9:00 PM
To: Mercedes Discussion List
Subject: Re: [M
Very definitely different, as the W108/109/111 was never sold with a
diesel engine
Peter
On Nov 17, 2008, at 8:55 PM, Frederick W Moir wrote:
Randy, et al.
According to EPC Online 0005811936 is a glow plug wrench for 108,
111,109,120.
New and different, get yours NOW!
Fred Moir
Lynn M
Randy, et al.
According to EPC Online 0005811936 is a glow plug wrench for 108, 111,109,120.
New and different, get yours NOW!
Fred Moir
Lynn MA
At 11:33 AM 11/17/2008, you wrote:
I picked up a wrench that says Mercedes on it. A single ended box
end with an arch in the handle and a size of 20.8
It's for adjusting the distributor on a diesel.
--R
Mitch Haley wrote:
A search for 0005811936 reveals lots of people selling them out of
1970ish toolkits, but they don't seem to know what it's for. 13/16 is
20.6mm, so I have no idea where 20.8 came from unless it's BS or
Whitworth.
Mitch.
R A Bennell wrote:
I picked up a wrench that says Mercedes on it. A single ended box end with an
arch in the handle and a size of 20.8
mm. Is this intended for a specific purpose? The size is what intrigues me. I
have to assume that something with a
unique size has a unique purpose. Photos atta
A search for 0005811936 reveals lots of people selling them out of 1970ish
toolkits, but they don't seem to know what it's for. 13/16 is 20.6mm, so I have
no idea where 20.8 came from unless it's BS or Whitworth.
Mitch.
___
http://www.okiebenz.com
For new p
I picked up a wrench that says Mercedes on it. A single ended box end with an
arch in the handle and a size of 20.8
mm. Is this intended for a specific purpose? The size is what intrigues me. I
have to assume that something with a
unique size has a unique purpose. Photos attached.
Randy
---
11 matches
Mail list logo
