[MBZ] cold start rpms
The 124 W201 does not have a high RPM idle when started frm cold . The cold start injector comes on for a second or so when started . It seems the Idle control valve is working and recleaned too, Input most appriciated Thanks mak ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] cold start rpms
2k doesn't seem right for that sensor, usually they are much higher, but I don't have that information handy at the moment. I'll try to look it up in a bit (I'm looking for the receipt for my cashier's check for the new Benz). The one for the ACC is a two pole after 7/87, single pole before that. Peter ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] cold start rpms
Thanks Peter . At a little loss about the temp.switch . single or double pin? There is the engine coolant sensor I checked which showed about 2K reading with a cold engine. the RMP's go up briefly when I pull and reconnect it back Regards mak - Original Message - From: Peter Frederick [EMAIL PROTECTED] To: Mercedes Discussion List mercedes@okiebenz.com Sent: Thursday, November 08, 2007 5:06 AM Subject: Re: [MBZ] cold start rpms Check the temperature switch -- I don't remember if it's open cold or closed cold, (probably closed) -- if not working, you may not get enough cold enrichment or the high idle. Double check the idle control valve and for vacuum leaks, too -- if you have enough leaks, the idle control valve won't do much. Peter ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.486 / Virus Database: 269.15.23/1114 - Release Date: 11/6/2007 8:05 PM ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] cold start rpms
Check the temperature switch -- I don't remember if it's open cold or closed cold, (probably closed) -- if not working, you may not get enough cold enrichment or the high idle. Double check the idle control valve and for vacuum leaks, too -- if you have enough leaks, the idle control valve won't do much. Peter ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com